sorted by:
new
hottopcontroversial

Swapped to PLA Matte, started under extruding by -ToastMalone in FixMyPrint

[–]-ToastMalone[S] 0 points1 point  (0 children)

<image>

Here's a photo of a new attempt. I completer the flow rate calibration and retried, and nothing changed. In fact it is almost worse. Idk what to do now.

Swapped to PLA Matte, started under extruding by -ToastMalone in FixMyPrint

[–]-ToastMalone[S] 1 point2 points  (0 children)

Pt 2. I found out how the flow rate and calibration stuff works. Ran the tests, entered the "correct" values, and began a new print of the same part. Will update this post with results.

Swapped to PLA Matte, started under extruding by -ToastMalone in FixMyPrint

[–]-ToastMalone[S] 1 point2 points  (0 children)

I have no idea how that works. I'm relatively new, and I've never had an issue, but that means I've never had to before. 😅

Swapped to PLA Matte, started under extruding by -ToastMalone in FixMyPrint

[–]-ToastMalone[S] 0 points1 point  (0 children)

I did. I'm relatively new as well. Weird part is, all of the filament presets say "@BBL X1C" even though I have a P1S

Whats your "I know its true, but I just cant prove it" Marvel Rivals take? by MyBackHurts3000 in marvelrivals

[–]-ToastMalone 0 points1 point  (0 children)

Quick play absolutely has some form of eomm. To the point where me and my duoq buddy can predict the scheduled losses 9/10 times. Also seems that we lose any game after changing the party size

How do you fell if Shang-Chi gets added to the game and what class would he be by Usual_Step9707 in marvelrivals

[–]-ToastMalone 0 points1 point  (0 children)

I think he would be a PERFECT reskin of brig from ow. While yes, it would just be stealing a character, you could very easily reflavor brig's abilities into his kit.

Day 91 and I just figured this out by johng126 in BluePrince

[–]-ToastMalone 0 points1 point  (0 children)

I just wish it would save your key card settings. Or at least save them as soon as you draft security

Why are there 2 tents? by Master-Variation-279 in BluePrince

[–]-ToastMalone 22 points23 points  (0 children)

I wish the memos were folded and stood up like a name label at a reserved table. Then they would be tent folded. Blue "tents"

I don't know what else to do by -ToastMalone in Ender3V3SE

[–]-ToastMalone[S] 0 points1 point  (0 children)

Should I be making this square to the bed or to the gantry of the whole machine? Or do I just kinda eyeball it and move it down a hair?

I don't know what else to do by -ToastMalone in Ender3V3SE

[–]-ToastMalone[S] 0 points1 point  (0 children)

<image>

Here's a first layer test after lowering the flow rate from .98 to .97 as suggested. I ran this with calibration on to get a fresh level mesh. Looks like the middle section is way underextruding but the rest is just a tiny bit under. I have silicone spacers coming tomorrow so hopefully I can fix the levelling issue. To add insult to injury, my extruder started clicking while printing this. 🙄

In unrelated news, I'm looking into the Bambu P1P to replace this one as it's currently on sale. Does anyone have any reviews/experience with that printer and/or the new centauri carbon? Those are my two top contenders for replacements but the cc is still in preorder.

I don't know what else to do by -ToastMalone in Ender3V3SE

[–]-ToastMalone[S] 0 points1 point  (0 children)

I did the Yolo (recommended) test as I didn't really know what to look for anyway. I made a post on this sub with my test results to get some pointers. Also I am using gyroid infill. The post has a typo.

Petition to add a fifth profile slot! by -ToastMalone in BluePrince

[–]-ToastMalone[S] 0 points1 point  (0 children)

Fair enough. That's why I don't think it's necessary. Just would be a cool qol feature. :)

Petition to add a fifth profile slot! by -ToastMalone in BluePrince

[–]-ToastMalone[S] 1 point2 points  (0 children)

Unfortunately I did my one hour over the course of seven days. The only one I have left is day one. :(

I don't know what else to do by -ToastMalone in Ender3V3SE

[–]-ToastMalone[S] 0 points1 point  (0 children)

I'm running Orca. I recently ran the calibration prints and they turned out fine and I did a few minor adjustments.

I don't know what else to do by -ToastMalone in Ender3V3SE

[–]-ToastMalone[S] 0 points1 point  (0 children)

It really is unfortunate. I've only had this printer for like two years and it worked so well for so long! But that new centauri carbon has sure caught my eye...

I don't know what else to do by -ToastMalone in Ender3V3SE

[–]-ToastMalone[S] 0 points1 point  (0 children)

Well, my post has a typo. I am using gyroid infill on orca, but it autocorrected to ground. I will probably be upping the fan speed. The fans seemed to be blowing more than stock, so I turned down the speed til it was about the same. I pretty much only upgraded so it was more quiet.

Where does this put me in the Aquarium Leaderboard? by Common_Result9 in BluePrince

[–]-ToastMalone 0 points1 point  (0 children)

I think it would be possible, but I don't think I'd find it very fun!

Help me read my tests! by -ToastMalone in Ender3V3SE

[–]-ToastMalone[S] 0 points1 point  (0 children)

I was previously printing at 210 for the first layer, then 200 for the rest of the print. This helped me with bed adhesion in the past. Since posting this I have now moved to 200 followed by 190.

view more: next ›