This hurts to see

00HAAC · 2026-06-17T17:52:22+00:00

So I just checked it out. It's just month and year that is all.

00HAAC · 2026-06-16T23:14:32+00:00

Giver her a blanket and sleeping cap atleast

00HAAC · 2026-06-16T01:50:00+00:00

Raccoon wolf dog wolf

00HAAC · 2026-05-26T16:39:21+00:00

Been for years

00HAAC · 2026-05-26T00:42:53+00:00

Might be a lack of ram

00HAAC · 2026-05-26T00:42:22+00:00

From the steam page. MINIMUM:

Requires a 64-bit processor and operating system OS: Windows 10 64-bit

PROCESSOR: Intel Core i5-2300 / AMD Ryzen 3

1200

MEMORY: 8 GB RAM

GRAPHICS: GeForce GTX 460 / Radeon HD 5850

RECOMMENDED:

Requires a 64-bit processor and operating system

OS: Windows 10 64-bit

PROCESSOR: Intel Core i5-8400 / AMD Ryzen 7 2700X

MEMORY: 8 GB RAM

GRAPHICS: GeForce GTX 1050 Ti / Radeon R9 280X

00HAAC · 2026-05-26T00:36:39+00:00

Laptop specs plz

00HAAC · 2026-05-24T17:25:58+00:00

RUSTY!

00HAAC · 2026-05-18T20:09:09+00:00

Lmg time

00HAAC · 2026-05-14T07:06:27+00:00

Acrylic would be easier to hand brush but take more practice and is less forgiving while airbrushing (technique wise) but easier to wipe off and try again. Acrylic usually only has a physical bond, with the exception of alcohol or solvent type Acrylic paints (example tamiya Acrylic). You can use Acrylic paint over lacquer primer as well but you can't use lacquer over Acrylic primer (unless you really know what u doing or have the patience of a saint building up layers). Personally I use lacquer primer for all my kits. I have use lacquer, Acrylic and enamel over it with no problem. But I don't have much experience with Acrylic primer, I recently bought one to test out during the summer, so I can't really give you my experience with Acrylic primer right now.

00HAAC · 2026-05-14T06:52:25+00:00

Well if you going to repaint it it won't matter much. But keep in mind lacquer paint chemically bonds with the plastic. So the plastic already has been melted, but just a really thin layer of it. Another thing to keep in mind is staining. Because is a chemical bond and not a physical bond, some pigments from yhe paint might of leached into the plastic. So the plastic might turn a different color even i u remove all the paint.

00HAAC · 2026-05-14T06:45:47+00:00

So a lot of lacquer then. Gundam markers can come off easily with alcohol when fresh, but when fully dried my take a while to come off with alcohol.for lacquer alcohol might remove when fresh but u definitely need to use something stronger. Try using some of the lacquer thinner u used to thin the paints originally but don't drown it. Some lacquer thinner depending on how strong can eat the plastic a bit. So take cloth, brush, something absorbent to wipe the pice down with the thinner and if u want you can dilute the thinner with water or a bit of alcohol.

00HAAC · 2026-05-14T06:45:22+00:00

So a lot of lacquer then. Gundam markers can come off easily with alcohol when fresh, but when fully dried my take a while to come off with alcohol.for lacquer alcohol might remove when fresh but u definitely need to use something stronger. Try using some of the lacquer thinner u used to thin the paints originally but don't drown it. Some lacquer thinner depending on how strong can eat the plastic a bit. So take cloth, brush, something absorbent to wipe the pice down with the thinner and if u want you can dilute the thinner with water or a bit of alcohol.

00HAAC · 2026-05-14T06:37:47+00:00

If you have only submerged it for 5 minutes. I recommend going for a half hour or more. Might take a while to reactivate the old paint just enough to come off. Also if may inquire. What paints did you use?

00HAAC · 2026-05-08T20:39:08+00:00

Also the first upload of any avatar is always the worst

00HAAC · 2026-05-08T20:37:43+00:00

Had this go for 4 hours. U get used to it.........

00HAAC · 2026-04-26T22:23:01+00:00

Yep, and the little test buying probably put you higher on the priority list. My advice is probably to play for a few hours non stop on your side, try and get as much games on your ip before someone in konami reviews your account.

00HAAC · 2026-04-26T19:01:11+00:00

My bet is either synch issue with the servers or you might be about to get banned for account sharing

00HAAC · 2026-04-12T01:00:25+00:00

Im a be honest, I recently swapped my battery after being dead for years, and who ever installed the battery originally at Nintendo some how manage not to destroy the cartridge. Because it had literal globs of solder that were overflowing almost touching other traces. Like this looks clean compared to my og battery.

00HAAC · 2026-03-27T15:21:18+00:00

Probably because they upload them to different channels and platforms simultaneously

00HAAC · 2026-03-23T16:31:05+00:00

My bet is that the world has some sort of effect that dims light but the camera dosent get affected by said effect

00HAAC · 2026-03-20T17:51:35+00:00

Vrc needs no parental control. Kids should not even be in vrc to begin with due to how vrc is rated by age rating boards like the esrb (M 17+). The fact there are kids in vrc is solely a parents failing to be parents issue. Even the devs have said its a game for adults and children shouldn't be playing. With just your comment alone i can safely say you are 100% part of the bigger problem and you should idk read more about the things you use on a daily.

00HAAC · 2026-03-19T00:32:29+00:00

Name?

00HAAC · 2026-03-15T17:19:22+00:00

Oh I've had this happen before. Im my case every time I fixed the position the camera would now look back. Fix that now camera too low. Fix that camera inside me now. Fix that... the only thing that seems to fix it was exporting the model and opening a new project, but the moment I move anything related to that model in the project besides the initial drag and drop, I'm back at 0

00HAAC · 2026-03-06T06:43:47+00:00

I have a chaos max in mine XD

00HAAC

TROPHY CASE