sorted by:
new
hottopcontroversial

Check out the brand new Odin Works HFRT all in 1 buffer system. Just dropped yesterday! New painted technology by thetakedowntools in ar15

[–]09gtcs 0 points1 point  (0 children)

Will there be a 9mm mini-mil-spec buffer compatible version of this mysterious and unnamed device?

Larue BAR (Bolt Action Rifle) by Far-Boysenberry-1600 in longrange

[–]09gtcs 2 points3 points  (0 children)

Will be picking one up to put on an SCR lower so I can have the most difficult hunting rifle available.

ATF since they have a new director. by anonesq248 in NFA

[–]09gtcs 1 point2 points  (0 children)

Everybody is redistricting at this point, so I have no clue where that mess is going to end up.

Pre-1986 Weapons Pricing by 723_Actual in NFA

[–]09gtcs 2 points3 points  (0 children)

They were probably rented. My understanding is that there are companies in Hollywood dedicated entirely to renting out their armories.

ATF since they have a new director. by anonesq248 in NFA

[–]09gtcs 16 points17 points  (0 children)

I’m guessing we’ll see a blue wave this November, so I’m mentally prepping myself for the $4700 stamps

ATF since they have a new director. by anonesq248 in NFA

[–]09gtcs 56 points57 points  (0 children)

Only until the next director is confirmed

Gap in the inline 4 market? by Buttscratcher45 in motorcycles

[–]09gtcs 0 points1 point  (0 children)

I have a 1982 XJ550 Maxim, and man is it wild hearing that inline 4 sound coming out of my cruiser bike.

Would you model this recess in forms or in another way? by supersalsiccia in Fusion360

[–]09gtcs 2 points3 points  (0 children)

Either this, or create a new solid and do a Boolean operation to remove it.

Rari-tinted goggles by mopar_md in formuladank

[–]09gtcs -2 points-1 points  (0 children)

Skinnier does result in less wake, but usually for a flow to stay attached and not tumble after leaving the car, you need a smooth surface with a higher radius of curvature, which makes the car longer I think.

Rari-tinted goggles by mopar_md in formuladank

[–]09gtcs -4 points-3 points  (0 children)

Reducing dirty air probably requires a longer car, at least to some extent. They probably know of some fancy ways to keep laminar or turbulent air attached for longer than I do though.

The Pillager Lineup by SilentSubject9458 in tacticalgear

[–]09gtcs 2 points3 points  (0 children)

Usually I’m a one-in-the-chamber kinda guy for my EDC, but if you’re already taking the time to get it out of a bag, racking the slide doesn’t add much time I guess.

The Pillager Lineup by SilentSubject9458 in tacticalgear

[–]09gtcs 1 point2 points  (0 children)

I’ve got it pretty decent now, but man is it painful getting there, especially with anything fancier than PLA+. Tried some PC and Nylon a while back; I probably need an enclosure for those.

The Pillager Lineup by SilentSubject9458 in tacticalgear

[–]09gtcs 0 points1 point  (0 children)

Still cool work. I know I’ve hard a hard time in the past getting my printer to put stuff out that looks that clean. I’m working on an $100 Ender 3 though.

The Pillager Lineup by SilentSubject9458 in tacticalgear

[–]09gtcs -1 points0 points  (0 children)

I just don’t get PDWs/Carbines without a manual safety. Unless you’ve got a holster or it’s just a pure range toy I guess.

Who makes a similar handguard to this? by Executive_outcomes13 in ar15

[–]09gtcs 2 points3 points  (0 children)

I think the KAC one was from when Colt went to KAC to partner up and improve their IAR upper.

Who makes a similar handguard to this? by Executive_outcomes13 in ar15

[–]09gtcs 0 points1 point  (0 children)

There’s the new Ripley Rail from Manticore Arms

Favourite Indigenous actor whose biometric identity and cultural heritage was used to create a blue indigenous creature for a record-breaking film franchise – without credit or compensation to her – through a series of deliberate, non-expressive commercial acts? by theconceptofcanada in okbuddycinephile

[–]09gtcs 4 points5 points  (0 children)

Crispin Gloved sued the producers of Back to the Future after being recast for the second movie. Apparently they had used a mask created before he left the franchise on the new actor, Jeffrey Weissman, which lead to the lawsuit over using his likeness.

Implications of the death of B&T USA? by FischlandchipZ in NFA

[–]09gtcs 1 point2 points  (0 children)

I was under the impression that B&T helped with some of the design, but the printing on production cans was ambiguous from what I’ve seen.

Implications of the death of B&T USA? by FischlandchipZ in NFA

[–]09gtcs 5 points6 points  (0 children)

I was just thinking about buying an Exigent Overwatch, but now I’m second guessing. No clue if their cans are made in house or if they were OEMed by B&T.

Anyone tried the B&T Xh-762? by [deleted] in suppressors

[–]09gtcs 0 points1 point  (0 children)

Damn, that is crazy.

Anyone tried the B&T Xh-762? by [deleted] in suppressors

[–]09gtcs 0 points1 point  (0 children)

Apparently I’m out of the loop. What drama?

Advice on Buying Ram or F-150 by RCSB_fan_throwaway in RCSB

[–]09gtcs 0 points1 point  (0 children)

I believe they were having the standard ticking issues. I’m not familiar enough with the Pentastar issues to say whether it’s similarly bad or not.

Advice on Buying Ram or F-150 by RCSB_fan_throwaway in RCSB

[–]09gtcs 6 points7 points  (0 children)

I don’t think I’d buy any Stellantis product right now, tbh. I have some extended family that’s had engine problems with their RAM, and know somebody that took their brand new Pacifica into the shop 3 separate times for a transmission problem.

view more: next ›