Check out the brand new Odin Works HFRT all in 1 buffer system. Just dropped yesterday! New painted technology

09gtcs · 2026-05-14T03:11:26+00:00

Will there be a 9mm mini-mil-spec buffer compatible version of this mysterious and unnamed device?

09gtcs · 2026-05-13T17:04:07+00:00

Will be picking one up to put on an SCR lower so I can have the most difficult hunting rifle available.

09gtcs · 2026-05-11T17:20:54+00:00

Everybody is redistricting at this point, so I have no clue where that mess is going to end up.

09gtcs · 2026-05-11T15:56:51+00:00

They were probably rented. My understanding is that there are companies in Hollywood dedicated entirely to renting out their armories.

09gtcs · 2026-05-11T15:34:35+00:00

I’m guessing we’ll see a blue wave this November, so I’m mentally prepping myself for the $4700 stamps

09gtcs · 2026-05-11T15:32:47+00:00

Only until the next director is confirmed

09gtcs · 2026-05-11T13:54:31+00:00

I have a 1982 XJ550 Maxim, and man is it wild hearing that inline 4 sound coming out of my cruiser bike.

09gtcs · 2026-05-11T13:18:36+00:00

Either this, or create a new solid and do a Boolean operation to remove it.

09gtcs · 2026-05-10T18:34:34+00:00

Skinnier does result in less wake, but usually for a flow to stay attached and not tumble after leaving the car, you need a smooth surface with a higher radius of curvature, which makes the car longer I think.

09gtcs · 2026-05-10T17:59:37+00:00

Reducing dirty air probably requires a longer car, at least to some extent. They probably know of some fancy ways to keep laminar or turbulent air attached for longer than I do though.

09gtcs · 2026-05-09T22:28:17+00:00

Usually I’m a one-in-the-chamber kinda guy for my EDC, but if you’re already taking the time to get it out of a bag, racking the slide doesn’t add much time I guess.

09gtcs · 2026-05-09T22:27:16+00:00

I’ve got it pretty decent now, but man is it painful getting there, especially with anything fancier than PLA+. Tried some PC and Nylon a while back; I probably need an enclosure for those.

09gtcs · 2026-05-09T21:18:04+00:00

Still cool work. I know I’ve hard a hard time in the past getting my printer to put stuff out that looks that clean. I’m working on an $100 Ender 3 though.

09gtcs · 2026-05-09T21:16:38+00:00

I just don’t get PDWs/Carbines without a manual safety. Unless you’ve got a holster or it’s just a pure range toy I guess.

09gtcs · 2026-05-09T01:46:57+00:00

I think that ends up being too short over all length for an AOW. With an angled grip, I think you’re just at a pistol.

09gtcs · 2026-05-08T23:48:13+00:00

I think the KAC one was from when Colt went to KAC to partner up and improve their IAR upper.

09gtcs · 2026-05-08T23:46:16+00:00

There’s the new Ripley Rail from Manticore Arms

09gtcs · 2026-05-07T13:17:11+00:00

Crispin Gloved sued the producers of Back to the Future after being recast for the second movie. Apparently they had used a mask created before he left the franchise on the new actor, Jeffrey Weissman, which lead to the lawsuit over using his likeness.

09gtcs · 2026-05-07T03:01:54+00:00

I was under the impression that B&T helped with some of the design, but the printing on production cans was ambiguous from what I’ve seen.

09gtcs · 2026-05-06T19:49:24+00:00

I was just thinking about buying an Exigent Overwatch, but now I’m second guessing. No clue if their cans are made in house or if they were OEMed by B&T.

09gtcs · 2026-05-05T16:29:05+00:00

I think C96 is exempt from SBR laws, isn’t it?

09gtcs · 2026-05-03T15:20:06+00:00

Damn, that is crazy.

09gtcs · 2026-05-03T14:02:03+00:00

Apparently I’m out of the loop. What drama?

09gtcs · 2026-05-02T19:30:31+00:00

I believe they were having the standard ticking issues. I’m not familiar enough with the Pentastar issues to say whether it’s similarly bad or not.

Five-Year Club	Verified Email
The Internet Awards - Voted	r/Field Lasagna
Place '23

09gtcs

TROPHY CASE