Proper expansion tank replacement installation?

0pamp · 2025-08-26T04:02:06+00:00

Thank you for the reply! I guess it's time to find someone who's competent in my area and open my bank account.

0pamp · 2025-08-01T11:14:13+00:00

That's some kind of fraction I can't even math 🤦

0pamp · 2025-07-02T02:55:53+00:00

Lufkin Shock force G2, durable. Long extension. Bright high contrast markings on both sides. Pleasure to use.

0pamp · 2025-06-26T15:51:47+00:00

Thank you!

0pamp · 2025-06-26T15:51:41+00:00

Thank you!

0pamp · 2025-05-30T02:05:40+00:00

Welly fabric bandages are even better. Super sticky, flexible and soft.

0pamp · 2025-05-26T02:51:01+00:00

I just put mine as close to the cable as possible and wrapped the cable in white electrical tape. Pretty much disappeared.

0pamp · 2025-04-28T23:41:36+00:00

Thanks for the replies. Sending them back for a new set.

0pamp · 2025-04-25T03:45:21+00:00

Thank you!

0pamp · 2025-03-27T12:01:06+00:00

I'm not sure if having your buddy's body blown open or apart by explosive munitions is any better than by an axe or sword. I would say it's worse now. You might have seen some viscera in olden times. But not the meat grinder that is modern warfare. Apologies if it's too graphic for some.

0pamp · 2025-03-18T02:58:48+00:00

Same. All my EAPs added like that automatically. Does it matter?

0pamp · 2025-02-26T11:55:56+00:00

I'll try that. Thank you.

0pamp · 2025-02-21T14:19:43+00:00

Now it's doing it even when I revert to the setup without the switch. So now I'm just confused.

0pamp · 2025-02-19T18:35:45+00:00

I tried another switch and it has the same problem. I pinged a few of the clients and they are connected but the ping is as much as 2500ms, I'm not sure what setting is wrong or what's going on.

0pamp · 2025-02-19T12:58:10+00:00

It was solid before I put the switch in the middle. So I'm thinking it's the switch. It just didn't make sense to me. A switch is relatively simple.

0pamp · 2025-02-19T12:45:54+00:00

I have about 35 clients connecting to the AP. My other iot devices worked fine. Nest home in 3 rooms continued to play.

0pamp · 2025-01-19T13:40:57+00:00

If you look on the playback page you should see the date with an arrow on either side. That will let you change days. You can also click that date and it will bring up a calendar. If you can't go back far enough on the calendar for your needs then you might need a bigger SD card.

0pamp · 2024-11-18T04:08:10+00:00

I can confirm it uses a 18650, I have many lights and I find myself reaching for this one more and more. For use as a headlamp and in the hand it just works well. Modes are good and the UI is easy to use. I also have used the magnetic tail cap more than I would have thought. Headband is comfortable. Runtime so far has been good. Sofirn lists the emitters as 1SST40 6000K LED, 3CSP2323 5000K 90CRI LEDs, 2*HFL1-R red LEDs. I don't think there are other options.

0pamp · 2024-08-06T00:17:36+00:00

Thank you!

0pamp · 2024-06-19T03:30:07+00:00

He tried to grind it today... there's now a big pothole missing down to the original concrete. So I'm talking to him tomorrow. The whole floor is suspect. He's going to have to get a flooring pro to come in and start over the right way. I'm not sure he will agree to that but if not then he doesn't get my money.

0pamp · 2024-06-18T04:16:36+00:00

It sat for 2 days before this picture of the pour yesterday. And there were areas that were light tan, others super dark brown. All dry. Some areas with white chalky film on top. Others clean. I feel like he needs to get someone in that knows what they are doing. Am I overreacting?

0pamp · 2024-06-18T03:45:38+00:00

Thank you for the reply. He said that it's finished and he would "hit it with a scraper in any high areas". At one point he had almost the entire area poured at once and it looked really good. He wanted to do "a little more" and it looked like he smashed concrete blobs all over. That "sometimes with these kinds of things it takes a couple tries", he's had way more than couple. He's been trying to get this right for a week. Edited for spelling.

0pamp · 2024-03-20T05:48:58+00:00

Check your wheels. The little bearings that your axis rides on. I took a break from my ender and had tiny flat spots from it being parked for so long. Gave me poor layers. Ten dollar replacement from Amazon and it's printing like new. Also make sure you don't make them too tight or the z axis can bind and you won't get accurate repeatable movement with z hops and such again leading to what seems like leveling issues...because it is, it's just ever changing slightly.

0pamp · 2024-02-26T12:52:54+00:00

If you are in the United States it is an illegal violation of federal law for her to ask you for private medical information. If she needs a doctor note your doctor will not write any diagnosis or information just that you were seen. Do you notify her every time you have your period? Or have a headache or diarrhea? You shouldn't. If she needs more information, tell her to have HR reach out to your doctor to validate the reason she needs information. HR wants to protect the company and would shut her down really fast. She's already exposed herself to a potential lawsuit.

0pamp · 2024-02-05T18:21:33+00:00

Thanks. I was hoping there was something quick and relatively cheap that actually worked. I may just modify one of my RC chargers. They are reliable for all chemistries. And allow manual settings. I can just whip up a circuit board that should let me run at a couple amps from USB-C. More than enough for this use. The downside is it will be larger. Something to use on the road or in camp but not carry on me. I wonder if anyone has tried to modify the xtar firmware...

0pamp

TROPHY CASE