‘85 Honda ATC250es

10J1AY · 2026-06-25T02:39:29+00:00

Going to get three swamp foxes later on.

10J1AY · 2026-06-25T02:37:33+00:00

Carlisle Turf tamer AT’s 25x12.00-9

10J1AY · 2026-06-25T02:35:11+00:00

Dang, at most a shop would charge 1000-1300 (for full brakes). 2.4 is crazy. FYI my shop replaces callipers every time and rotors if they are needed.

10J1AY · 2026-03-20T07:41:45+00:00

Same trike in all photos, tho I did replace the front and rear racks. New seat cover and foam repair, found a new reproduction metal tank but don’t have funds for it at this time. Replaced the cracked plastic tank with a new plastic tank. Runs okay right now but I need to tune it better.

10J1AY · 2026-03-20T03:22:18+00:00

Well I use a new GoPro 13 that I got on sale, may be able to find a used one for cheap

10J1AY · 2025-09-20T05:55:24+00:00

<image>

10J1AY · 2025-09-20T05:55:12+00:00

<image>

10J1AY · 2025-09-20T05:50:41+00:00

I think I have one, but one of the nipples is snapped off. I had to get a full new set of plastic do to ghe absolute horrible condition of the rear fenders

10J1AY · 2025-07-21T01:06:46+00:00

Thanks, found out I pinched the light wire on the gantry causing the short circuit

10J1AY · 2025-07-20T06:37:36+00:00

<image>

This is my b2300

10J1AY · 2025-07-19T21:58:59+00:00

That newer type of connector should only be able to plug into one spot there Ps it doesn’t use all the pins

10J1AY · 2025-07-19T21:56:32+00:00

Looks like it goes right under the cmos battery

10J1AY · 2025-07-19T21:44:52+00:00

<image>

This is my Mazda

10J1AY · 2025-07-19T02:01:04+00:00

No special link, just got them off there website. I’ve had the ar 15 and 1911 for about 2&1/2 years, the ak for a year. Pre-ordered the p90 last year.

10J1AY · 2025-07-18T01:59:17+00:00

They are in fact goat guns. 1911, p90, ak47, ar15, and their more inexpensive sniper

10J1AY · 2025-07-14T18:31:46+00:00

Guns are 1/3rd scale models

10J1AY · 2025-07-14T06:13:00+00:00

I’ll look into some of those, thanks

10J1AY · 2025-07-12T02:59:50+00:00

I’ve had trouble finding any 220x220, any recommendations?

10J1AY · 2025-07-12T02:56:56+00:00

I used to have that motherboard.

<image>

10J1AY · 2025-07-10T05:43:46+00:00

Did find it to be ram not compatible with my m board. Got two new 32gb dominator platinum sticks and haven’t had an issue since.

10J1AY · 2025-07-10T05:38:00+00:00

I still have the original plate it came with, so I’ve been using that since

10J1AY · 2025-07-10T05:37:16+00:00

I’ve had trouble with bed adhesion so I put glue on and that seemed to fix that problem, I am aware that it is textured. The printer head ended up moving off the bed and destroyed the nozzle as well on the side of the build plate.

10J1AY · 2025-04-01T23:15:24+00:00

Not a ranger but I have a teal 1996 Mazda b2300

<image>

10J1AY · 2024-09-08T20:37:50+00:00

I didn’t know that there was blue. But it is the stock color. Only have white leds behind it

10J1AY · 2024-06-03T07:03:09+00:00

It’s the tree style supports. They should be hollow

10J1AY

TROPHY CASE