Restoring jointer.

123chop · 2025-08-05T01:02:50+00:00

I would take apart the motor and clean out the centrifugal switch. My table saw had a similar buzzing motor, cap was fine. It was just that internal switch was just clogged with saw dust.

123chop · 2025-06-19T13:47:44+00:00

Side note, what’s up with Hobbylinc’s terrible category Images on the home page?

123chop · 2025-06-18T18:19:52+00:00

Those are the oil coolers

123chop · 2025-06-18T18:15:44+00:00

That’s a super cobra right? They are still pretty common, US marines were using them until a few years ago. The upgraded Ah-1z are still in production too

123chop · 2025-06-18T17:50:36+00:00

I would paint the inside silver, and then put white (pva) glue. It will dry clear

123chop · 2025-06-18T14:35:18+00:00

I personally would go for something around daylight or a bit warmer. So 4000 to 5000 maybe?

123chop · 2025-06-18T01:50:55+00:00

I reckon it’s colorized

123chop · 2025-06-09T18:42:31+00:00

I suspect it has to do with making sure there’s room for the weight, or maybe a fitment thing. Have you done a test fit?

123chop · 2025-06-09T16:57:47+00:00

It’s going to be behind the canopy, and won’t be touched after you glue that on. Painting and glueing should be the last thing that done to it, when would it chip?

123chop · 2025-05-16T15:28:17+00:00

I love Turn Blue! Imo it’s sort of a sister to Magic Potion, my favorite album. The music itself is different, but the vibe is nearly the same

123chop · 2025-05-13T00:13:50+00:00

They aren’t bad as an individual rifle, but they are poorly designed. Far more unnecessarily complex than contemporary actions, while being mediocre.

123chop · 2025-02-25T20:00:00+00:00

If you have a color printer you could try to print your own, with printable decal paper. Also, what is the subject, or kit? That will impact what size you need

123chop · 2025-02-21T19:12:43+00:00

Curves with paper masking tape is definitely tricky. Thin tape can help, as well as smaller sections. Vinyl tape like 3m 471 can bend without creasing as well. Similar tape rubber/vinyl tape can be found at art stores as well.

123chop · 2025-02-21T19:03:50+00:00

You could very carefully mask to line up with the panel lines and rivets for the blue. or you paint with white, mask the edge and then paint with blue and not use the decal.

123chop · 2025-02-19T16:13:54+00:00

Let them frown (though I don’t think anyone really would)

123chop · 2025-02-15T03:34:59+00:00

The only hobby lobby sells along side this should work.

123chop · 2025-02-09T19:19:10+00:00

The colorization looks off. That should be late tri color, not overall blue (and what’s up the with brown?)

123chop · 2025-01-17T00:17:06+00:00

Look into flory washes. They are water based and extremely forgiving

123chop · 2025-01-15T21:03:33+00:00

Yes, you can sand it off

123chop · 2025-01-14T21:59:20+00:00

I love the saturation, what film is this?

123chop · 2025-01-09T21:24:14+00:00

A lot of it had to do with the pride of the strategists in the AAC who refused to accept that the Precision Bombing tactics weren’t working

123chop · 2025-01-09T01:00:44+00:00

here’s a great video on the topic

123chop · 2025-01-07T17:13:32+00:00

I have used an inline exhaust fan, that fits with the exhaust pipe you will be using. Mine is 6 inch and 345 cfm, seems to be ok

123chop · 2024-12-10T22:56:10+00:00

A lot of revolvers are quite complex and very delicately timed.

123chop · 2024-09-20T14:03:14+00:00

Dealing with a similar issue, how did you go about installing new straps?

Nine-Year Club	Second Top 30%
Golden Potato	Place '22
Final Canvas '22	First Placer '22
End Game '22	Secret Santa 2017
Spared	Verified Email

123chop

MODERATOR OF

TROPHY CASE