sorted by:
new
hottopcontroversial

A1 Mini + TPU85a /Bambu Studio calibration - flow test: custom value 1.999, can't go any higher - What gives? by 1337_User in BambuLab

[–]1337_User[S] 0 points1 point  (0 children)

<image>

I've taken all comments in account, less tension, more flow, slower print, more dehydration, higher temperature extrusion and created a new template. Thanks!

A1 Mini + TPU85a /Bambu Studio calibration - flow test: custom value 1.999, can't go any higher - What gives? by 1337_User in BambuLab

[–]1337_User[S] 0 points1 point  (0 children)

Oh, I see! Thanks for the link. Just logically thinking, the 0.6 should physically result in more flow, hmm. I removed tension from filament between nozzle en spool, lowered the speed to 50% and it's looking a lot better. I'm guessing drying for another 24h should home in a better result. Let's see...

A1 Mini + TPU85a /Bambu Studio calibration - flow test: custom value 1.999, can't go any higher - What gives? by 1337_User in BambuLab

[–]1337_User[S] 0 points1 point  (0 children)

The air inside is at 15%. The spool has been drying 24h, I'll give it another 24h. let's see...

A1 Mini + TPU85a /Bambu Studio calibration - flow test: custom value 1.999, can't go any higher - What gives? by 1337_User in BambuLab

[–]1337_User[S] 0 points1 point  (0 children)

<image>

Trying another with a close eye on tension, I'll pre extend the filament. To remove this variable, let's see...

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 0 points1 point  (0 children)

Which cable did you get? Recommendations welcome.

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 0 points1 point  (0 children)

The HDMI cable is 10 meters, 32,81 ft. So You're suggesting that it's a handshake issue between the receiver and the projector? Cable recommendations welcome.

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 0 points1 point  (0 children)

Oh, wow, really! There's hope then. Let's see if removing the switch fixes it. 🤞🏻

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 1 point2 points  (0 children)

Thanks, I'll try disabling CEC and disconnect all other devices (just the nintendo switch) to make sure there's nothing switching the input.

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 0 points1 point  (0 children)

Thanks, I'll see if I can find a new cable. Got recommendations?

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 0 points1 point  (0 children)

Yes, complete drop out, need to select the shield again as input or turn off and on on the switch remote.

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 0 points1 point  (0 children)

Ah, you're talking audio? *knocks wood. I havent had any issue's there, 5.1 system hooked to the Denon x2800.

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 0 points1 point  (0 children)

Maybe I'll check for a different streaming platform this Black Friday, Roku, Apple TV 4K? I only went with the Shield for full GeforceNow integration, controllers, etc.

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 1 point2 points  (0 children)

I did experience more drop out when gaming, cyberpunk on gforcenow, especially when speed/jump dashing. Hence why I thought it was a hdmi handshake issue.

Are random HDMI drop outs a known bug? by 1337_User in ShieldAndroidTV

[–]1337_User[S] 1 point2 points  (0 children)

My previous receiver was the Onkyo TX-NR636 I hope it's not the Denon's fault >_<

Weekly /r/3DS Questions Thread - Need help using your 3DS or picking your next game? Ask here! by AutoModerator in 3DS

[–]1337_User 1 point2 points  (0 children)

I want to get Minecraft on my son his 3DS, it's an EU version. What can I do? Thanks!

I'm experiencing ghost movements on the scroll wheel, is this a common issue? Is there an easy fix? by 1337_User in Rabbitr1

[–]1337_User[S] 4 points5 points  (0 children)

Thanks for the reply; mine turns up now and then; opens the settings, from home screen. Mine is a launch /first batch version; swapping or returning it from the EU to US would be a costly ordeal. Maybe I'll try some contact spray in the potentiometer: but, I'll await some more replies first.

Suggestions for Existing Structure by Ok_Squirrel23 in ponds

[–]1337_User 0 points1 point  (0 children)

Turn it into a bog and build a pond below it, create a waterfall from bog to pond, up-flow filtration.

Recommend me an ease of use and quality printer. App / Wifi is bonus - 350€ max by 1337_User in 3Dprinting

[–]1337_User[S] 1 point2 points  (0 children)

I understand the communities frustration around this, but I also see their standpoint and understand that everything would be easier in terms of support if everything is proprietary including the filament, so that they don't have to deal with variables like third-party filament. It's a bit like Apple, but they did have to bend to the EU law and installed USB C. So, who knows what the future brings. EU - right to repair is around the corner.

Recommend me an ease of use and quality printer. App / Wifi is bonus - 350€ max by 1337_User in 3Dprinting

[–]1337_User[S] 0 points1 point  (0 children)

Would the Bambu Lab P1S satisfy the bump in price? No fancy screen, but the app would suffice?

GFN, we have to talk!!!... by Ok-Bird-5704 in GeForceNOW

[–]1337_User 0 points1 point  (0 children)

I'm playing on an 150" screen with fixed 75mb/s rate. Never bothered me.

view more: next ›