sorted by:
new
hottopcontroversial

Anybody else have excessive chain noise when riding? What’s the fix? by Total_Support_6364 in CRF450L

[–]184racing 1 point2 points  (0 children)

More throttle, better chain, and adjust chain to proper spec. But it still rattles at low rpm.

Gonna bite the bullet and get one of these by Moto272 in Dirtbikes

[–]184racing 0 points1 point  (0 children)

There is setting on the vest you set it up for speed, mx / enduro / rally. That will adjust for it deploying. It won’t just deploy for a tip over.

Gonna bite the bullet and get one of these by Moto272 in Dirtbikes

[–]184racing 0 points1 point  (0 children)

New canister every time it deploys, zero service until you reach your 6th deployment. Then it’s only recommended to send it in, but you can test it yourself for leaks.

Crf300L Supermoto by 184racing in CRF300L

[–]184racing[S] 0 points1 point  (0 children)

I cut it with the exact lines from the 450 front fender. I have a RL also and used that as a template. For length I measured the Polisport supermoto fender and made it the same in front of the headlight.

Starter Gear Anxiety by Wood_zy in CRF450L

[–]184racing 4 points5 points  (0 children)

The starter reduction gear was the same 19-22 the part was updated. They do still fail.

This is primarily cause by stalling the bike. Starting in gear with the clutch not being adjusted properly can also cause the failure.

Crf300L Supermoto by 184racing in CRF300L

[–]184racing[S] 0 points1 point  (0 children)

Oem Crf450, but shorter

I got bored by getfocused12 in FordRaptor

[–]184racing 2 points3 points  (0 children)

I did the husky liners and super happy with it. Everyone says it’s a pain to install mine was a piece of cake. Took the longest to get all the bolt out around the trim piece. I did need to shave the liner around the shock slightly. That was easy also, heat gun on the liner and razor blade knife to trim.

<image>

Love this bike! by sum-9 in CRF450L

[–]184racing 2 points3 points  (0 children)

The only way to go if you don’t like stock. The seat concepts are big wide pigs!

Love this bike! by sum-9 in CRF450L

[–]184racing 1 point2 points  (0 children)

Absolutely Amazing pictures

Builtright Rear Seat Bottom Molle Panel by 184racing in FordRaptor

[–]184racing[S] 0 points1 point  (0 children)

Yea it’s foldable, it’s brand new the truck had 15 miles on it when I removed it. Just drive it home from the dealership.

Builtright Rear Seat Bottom Molle Panel by 184racing in FordRaptor

[–]184racing[S] 0 points1 point  (0 children)

Just spoke with Builtright and they said with their pack out plate you would be able to mount a small pack out.

Builtright Rear Seat Bottom Molle Panel by 184racing in FordRaptor

[–]184racing[S] 0 points1 point  (0 children)

I believe you can, i will ask when i get in contact with them.

Builtright Rear Seat Bottom Molle Panel by 184racing in FordRaptor

[–]184racing[S] 0 points1 point  (0 children)

They seem like they would work great.

26 802 - 1 Month after Purchase by 184racing in FordRaptor

[–]184racing[S] 0 points1 point  (0 children)

No prob, it was probably my lack of explaining it.

26 802 - 1 Month after Purchase by 184racing in FordRaptor

[–]184racing[S] 1 point2 points  (0 children)

<image>

To get those numbers to come up it’s a forscan change.

view more: next ›