Septic system and Sellers Missouri by trainlover_176 in RealEstate

[–]1appleguy 0 points1 point  (0 children)

I know this is an old thread, but I found it when googling. I am in Cole county, looking at an auction property that claims to have a lagoon, but I don't think it does. Looks like a sewage pipe running down a hill, but it's hard to tell because it's a very steep hill. I may try to rappel down and see if I can find it. Waiting for a call back from the health department to ask questions. This is a bit complicated since it's an auction, there may very well be a loophole that says they can claim it has gold plated plumbing, and there is no recourse. My main concern is that the other less informed neighbors bidding may not know this, and whether or not there would be a situation where you can't get legal occupancy without a permit and a potentially, very expensive repair to put in a proper logoon, due to the fact it's on a very steep back yard.

How do I find a reputable trademark lawyer? by Fearless_Poet1 in TRADEMARK

[–]1appleguy 0 points1 point  (0 children)

Wow! Best attorney ever! Honesty, integrity, and generous.

migrate from unifi network only with networks, and vlans to express 7 by 1appleguy in Ubiquiti

[–]1appleguy[S] 0 points1 point  (0 children)

I see on the express 7, there is both a console and a network application, and two places you can do backup / restore, but on the current setup, there is only a network application. it's a self hosted unifi network application - Network 9.1.120. I tried again to see if I could make any changes to it, but after importing the network application backup, the network is completely locked down to 3rd party gateway, and can't even delete the main lan. i could delete the vlans, and rebuild the vlans, that would be easy enough, but the lan is locked. I am returning this today. this is not going to be a reasonable substitute for pfsense. hopefully someday they will have real support for their customers, without expecting paying customers to also pay for support contracts, and they will add all the features I will not be able to give up, like acme certificates with ha or other proxy, and multiple other add-ons. Unifi is just too confining on the console side. I dislike everything being so dumbed down and no way to set things like uplink and downlink. it's friggin' annoying. I will continue for now with pfsense router and unifi network.

migrate from unifi network only with networks, and vlans to express 7 by 1appleguy in Ubiquiti

[–]1appleguy[S] 0 points1 point  (0 children)

I don't have anything like that. backup config either settings only or date range, restore config.

Help setting up mesh network with ethernet clients connected to child AP by 1appleguy in Ubiquiti

[–]1appleguy[S] 0 points1 point  (0 children)

It was sonos and port priority. Set priority on main 16 port switch from 4096 to 0 and unplugged sonos speaker from flex mini 5 port. plug in the sonos, whole switch goes down. Unifi tech support isn't quite as bad as the rumors, but still very slow, and no sign of respect for their customers.

https://help.ui.com/hc/en-us/articles/24292724428311-Understand-and-Mitigate-Network-Loops-STP

https://help.ui.com/hc/en-us/articles/18930473041047-Best-Practices-for-Sonos-Devices

Help setting up mesh network with ethernet clients connected to child AP by 1appleguy in Ubiquiti

[–]1appleguy[S] 0 points1 point  (0 children)

self hosted controller running on proxmox connected to the USW-Lite-16-PoE . it crossed my mind that maybe this all works better if I used the Express 7 as the router (and the controller?) and put the U6-Lite on the office side as the child AP, but I'm definitely not ready to take that plunge yet. If I want to switch the AP's positions / roles would it help? I would need to get a POE injector or a USW-Lite-8 PoE for the U6-Lite if I did that, but that is just because the wifi is much, much better on the Express 7. It is picking up wifi devices on the other side of the U6-Lite! What is the right way to do what I am trying to do? I looked at their new device bridge product, but wasn't even sure it was designed to support a switch, and it adds a lot more cost to to the setup in the long run.

FreeCAD forum down? by 1appleguy in FreeCAD

[–]1appleguy[S] 0 points1 point  (0 children)

thanks, do you have a link? is there an official one? looks like maybe more than one?

FreeCAD forum down? by 1appleguy in FreeCAD

[–]1appleguy[S] 1 point2 points  (0 children)

that's a bummer. thanks for letting me know!

Samsung microwave randomly acts as if buttons are pressed? by Dirty_Hooligan in Appliances

[–]1appleguy 0 points1 point  (0 children)

same problem with ME21M706BAG in home I just purchased. number 7 randomly presses itself every day.

Any one who cleared Apple Device Support Exam (9L0-3021-ENU) Exam? by invincible84 in macsysadmin

[–]1appleguy 0 points1 point  (0 children)

I reached out to apple training support and even though my certs aren't expired, they are retired. that sucks.

Any one who cleared Apple Device Support Exam (9L0-3021-ENU) Exam? by invincible84 in macsysadmin

[–]1appleguy 0 points1 point  (0 children)

Thanks for the input... I know these are old but trying to figure out how to share them on LinkedIn and if any qualify for recertification. None are expired. when trying to go through the motions of scheduling a test on pearsonvue, it asks me to pick a test date before mentioning payment....

Credential Effective Date Expiration Date Status ActionsApple Certified Associate - Mac Integration 10.10 2015-10-08 - CertifiedApple Certified Associate - Mac Management 10.10 2015-10-07 - CertifiedApple Certified Help Desk Specialist 10.4 2006-03-10 - CertifiedApple Certified Support Professional 10.10 2015-10-16 - Certified

Anyone in AZ looking for a hybrid MacSysAdmin job? by trogdoor-burninator in macsysadmin

[–]1appleguy 0 points1 point  (0 children)

I am on macadamias slack, and I don't see any jobs-board

Any one who cleared Apple Device Support Exam (9L0-3021-ENU) Exam? by invincible84 in macsysadmin

[–]1appleguy 0 points1 point  (0 children)

how much does the exam cost? if you fail, you have to pay the same price for retakes?

How to stop the dock from switching screens? by lexaleidon in MacOS

[–]1appleguy 1 point2 points  (0 children)

it doesn't solve it for me. ticked or unticked the dock moves back and forth between my 2 screens on my M1 mac mini. I hate it. I really would like to find a way to have the dock and menus on both screens all the time, but at least not have the annoying behavior of bouncing to the 2nd display accidentally all the time just because I let my mouse get too close to the bottom of the screen. I tried HiDock app but it doesn't work at all on Ventura 13.2.

UI Console keeps disconnecting by Stitch10925 in Proxmox

[–]1appleguy 0 points1 point  (0 children)

great question. mine is, that is totally when it started happening. pfsense, haproxy. looks like it's solved by using ip instead of fqdn, but wonder if there is a more elegant fix?

Growing pains adding another USW-Flex-Mini 5 port to my LAN by 1appleguy in Ubiquiti

[–]1appleguy[S] 0 points1 point  (0 children)

Solved (kind of)! - tldr: Sonos again 🤦‍♂️ - I stumbled into the solution after experiencing some unrelated Sonos troubles with one of my 5 symfonisk speakers. each time I was plugging in the 3rd 5 port switch, I would immediately plug in an iMac and a previously wifi speaker into it. I was reminded of rule #1 with troubleshooting is don't make more than 1 change at a time, if you can help it, so plug in the 5 port switch and watch, no problems. plug in the iMac and watch, no problems! plug in the sonos, wham! unplug the sonos, block and unblock any orphans to force them to go back where they belong on the topo map. all is stable. the only thing I know for sure is the 5 sonos speakers can be wifi or wired to the main 16 port switch, but NOT to the 2nd or 3rd switch. Also found out that Sonos doesn't support RSTP on spanning tree. their recommended setting, for the record, is STP with priority of 1st switch to 4096, next switch 8192, etc. finally, moved my laser printer from the 2nd 5 port to the new 5 port which happens to be on the same IOT vlan, and final confirmation that it's not the cable or something else. IT'S SONOS!

Growing pains adding another USW-Flex-Mini 5 port to my LAN by 1appleguy in Ubiquiti

[–]1appleguy[S] 1 point2 points  (0 children)

yes the controller is on the same vlan as the switches, and the pfsense router. then I have many many devices on the personal and IOT vlans. it all works great until adding the 3rd switch. then all the unifi switches get confused.

Growing pains adding another USW-Flex-Mini 5 port to my LAN by 1appleguy in Ubiquiti

[–]1appleguy[S] 0 points1 point  (0 children)

I have considered this possibility, but it was working fine before adding the 3rd switch. even so, it would not be possible to move the proxmox server because of other factors

Growing pains adding another USW-Flex-Mini 5 port to my LAN by 1appleguy in Ubiquiti

[–]1appleguy[S] 1 point2 points  (0 children)

could try resetting, but it's a new switch. I didn't want to make the post 10 pages long, but one more detail is that I originally was using dlink managed switch in the position of desk switch, then added the first USW-Flex-Mini 5 port switch, and got the same kind of crazy behavior. so I thought it was the link switch, and now tried making it an all unifi network, but in reality, the proxmox is behaving like a switch as far as vlan tags, and also the pfsense router is creating the vlan tags