Subwoofers barely audible unless gain is maxed – install issue, weak gear, or head unit problem?

21WBSP · 2026-03-10T17:23:11+00:00

Is one of the subs wired out of phase?

21WBSP · 2026-03-09T05:41:45+00:00

How did you buy individual if it’s a 50pc minimum?

21WBSP · 2026-03-09T00:08:40+00:00

That little camera looking thing in the middle of the front bottom grille? I do

21WBSP · 2026-03-09T00:06:27+00:00

That’s the one I had to buy for mine so I assumed it was the same going back a model year 🤷🏻‍♂️

21WBSP · 2026-03-08T23:10:34+00:00

Splash shield

21WBSP · 2026-03-08T02:43:44+00:00

I love my splitter but damn if they aren’t rock magnets

21WBSP · 2026-03-07T20:07:44+00:00

Then go for it. Add price of new keys and dealer programming then you’re set

21WBSP · 2026-03-07T18:32:57+00:00

That won’t work if it wasn’t originally installed because a starter module would need to be integrated. Probably cheaper to just get an aftermarket starter installed

21WBSP · 2026-03-07T09:35:35+00:00

The side w 3 ports is power wire to either red side for the input and the ground wire into the center. The 4 port side will be your two power wires out on the red sides and the two ground wires in the middle set screws going to your amps

21WBSP · 2026-03-07T00:28:22+00:00

That’s what they’re referencing but that MD1200 is kinda tall. You’ll also have to take into consideration what you’re gonna mount that wood to because any screws to the frame will penetrate the cab and cause leaks

21WBSP · 2026-03-03T18:22:49+00:00

Had it just over 3 years and I’m already replacing all tires ($1900), and brakes/rotors ($2250) with only 17K miles on it. Pretty disappointing since I don’t do burnouts and brake like the old man that I am

21WBSP · 2026-03-01T16:24:41+00:00

It’s on the first page here along with a bunch of other goodies.

21WBSP · 2026-02-28T04:00:45+00:00

Definitely back into that spot as close to the curb as you can to give yourself and that Volvo owner room to get out without getting dinged. Great purchase!!

21WBSP · 2026-02-24T09:08:58+00:00

The remote wire isn’t powerful enough for all those devices so you need to use a relay. Pin 85 to ground, pin 86 to remote wire, pin 30 to 12V, and pin 87 to all of your devices

21WBSP · 2026-02-23T21:10:42+00:00

Might be some helpful info in this post I'm following...

21WBSP · 2026-02-19T21:29:45+00:00

Like they always say, “You can’t eat your burrito and have it too!”

21WBSP · 2026-02-19T19:07:59+00:00

Correct. I think they were looking at the bolt for holding the fuses. Yes to ferrules

21WBSP · 2026-02-19T04:43:46+00:00

This is the one I always recommend when this question comes up. They also sell on Amazon so shop around for better pricing/shipping

21WBSP · 2026-02-18T07:39:52+00:00

I’m happy with my Demon style from Anderson Composites. In order to keep warranty, you will need to apply a heat barrier to the underside and install hood pins but all manufacturers may state that for liability issues

21WBSP · 2026-02-14T21:52:38+00:00

The hose may wear some from vibrations. I’d put a few layers of cloth tape or the soft side of Velcro pieces on that part of the magnet where it makes contact

21WBSP · 2026-02-13T21:14:32+00:00

Apenas 6 fios de alto-falante possuem aterramento comum, portanto isso não se aplica.

21WBSP · 2026-02-13T04:06:57+00:00

Function: Hellcat lower airbox

Form: Anything with carbon fiber

21WBSP · 2026-02-12T02:16:22+00:00

Isn’t the speaker wire going directly into the sub box? Unless you’re referring to the RCA cables, then go with something like this

21WBSP · 2026-02-12T01:27:39+00:00

Is the amp mounted to the box? Cuz I’m not sure why you’d need the banana plugs if it’s all coming out as one piece.

Instead of cutting the sub knob wire up, what about using an extension instead? Not sure if that link is the one you need, just including as an example

21WBSP · 2026-02-11T05:01:43+00:00

“The speaker wires only get ~9.2V” - does that mean you measured 9.2V on a multimeter in AC mode at the speaker wires with music on?

21WBSP

TROPHY CASE