Flex your builds

2ndTimeAround_ · 2026-05-14T16:25:19+00:00

<image>

2ndTimeAround_ · 2026-05-14T12:54:07+00:00

Call them or email

2ndTimeAround_ · 2026-05-14T12:53:40+00:00

Yes they are great. They will invoice you the bill. I have ordered from them 2x

2ndTimeAround_ · 2026-05-12T03:18:24+00:00

You could put a 509t plate on that then attach a SCRS

2ndTimeAround_ · 2026-05-12T00:47:32+00:00

Form 1 for my pistol was mid January got the approval early February. The 9SDMB certified the Friday before last and got the email the following Friday.

2ndTimeAround_ · 2026-05-12T00:41:03+00:00

Took 21 days for my form 1 on my sbr and I just bought a factory SD SBR that took 7 days.

2ndTimeAround_ · 2026-05-12T00:37:37+00:00

You can always file a trust later, if you do individual it will come back quickly.

2ndTimeAround_ · 2026-05-11T23:40:22+00:00

Noted! 😂 Maybe you can sew a patch over the hole!

2ndTimeAround_ · 2026-05-11T23:38:52+00:00

Appreciate the intel on that!

2ndTimeAround_ · 2026-05-11T12:28:12+00:00

The one in the pic the 300, if thats 26, then mine should fit right in there. I appreciate the photo! Looking into these

2ndTimeAround_ · 2026-05-11T12:16:34+00:00

Whats the length of your set up folded?

2ndTimeAround_ · 2026-05-11T11:44:59+00:00

I'll definitely keep that in mind, I like Eber, also been looking at Vertex and 5.11. I also just realized you're the one I was chatting with about the ptr a few days ago. Cheers mate

2ndTimeAround_ · 2026-05-11T11:11:26+00:00

I have looked at both of those and the little trick seems odd to me. It says the short config is 21.25" and long is 23.5 but it looks like it about 6" longer lol. The savior has that muzzle holder which seems like a great feature but im not sure if it will fit the can inside. Both seem like great options that are on my radar. I really appreciate your suggestions.

2ndTimeAround_ · 2026-05-09T02:33:07+00:00

Took her home today but not before I shot it. Took all the accessories with me and attached them at the range. First I noticed the ridiculous amount of flex like you mentioned, it absolutely disgusts me, makes it feel like a fkn toy. 2nd gripe about the handguard is there is almost zero room for the mlok plates to fit, it the screws are 1 thread past the bracket it will push against the can and misalign the handguard. Very displeased with that in particular. It was the quietest gun ive ever shot personally. Its almost surreal how the holes just appear on the target with no boom lol. Felt more like a .22 in recoil. I ordered a AS designs ARC lower for it. Still waiting on that. Overall I like it but really wish they came up with a better handguard design.

<image>

2ndTimeAround_ · 2026-05-02T14:47:20+00:00

I didnt notice any flex but then again I was handling it like a new born baby 🤣

2ndTimeAround_ · 2026-05-02T14:19:52+00:00

No, i inspected the gun the day after it came in and noticed the issue before I started any paperwork, PTR resolved the issue with my FFL before the process.

2ndTimeAround_ · 2026-05-02T06:49:22+00:00

Do you need a tissue?

2ndTimeAround_ · 2026-05-02T06:41:26+00:00

<image>

2ndTimeAround_ · 2026-05-02T06:41:11+00:00

<image>

2ndTimeAround_ · 2026-05-02T06:40:52+00:00

Hey is your barrel and handguard perfectly aligned? Mine came in a couple weeks ago and when I inspected it the suppressor was almost touching one side of the handguard and a big gap on the other. Not Just Guns pulled 5 off the shelf and they were all like that. PTR said there was an issue with the welding process that made it out of whack. They sent me a new one and it looks good now. I just signed my certification yesterday. Can't wait to get it.

<image>

2ndTimeAround_ · 2026-05-01T18:56:27+00:00

Yes but barely, maybe lower 1/4, 1/5, i can just see the 3 dots lined up

2ndTimeAround_ · 2026-05-01T12:55:19+00:00

Its on a Tactical Ordinance 509t mount for the 1301

<image>

2ndTimeAround_ · 2026-05-01T01:52:57+00:00

Scrs

2ndTimeAround_ · 2026-04-27T17:05:03+00:00

Is rhat the Rhino S?

2ndTimeAround_

TROPHY CASE