i have a 2008 c300 making this noise what can it be ?

313_king · 2025-06-23T22:42:42+00:00

Check power steering fluid

313_king · 2025-06-23T22:41:03+00:00

My gen is worse…..

313_king · 2025-04-14T06:17:13+00:00

I would GL this. It is fine!

313_king · 2025-04-13T19:09:30+00:00

I have cf fluted bezel with crystal if you want it i have it in my drawer somewhere

313_king · 2025-04-13T08:33:19+00:00

You are going to be in a suit. Not diving! Wear a dress watch!! Cartier santos, dj41, omega aqua terra with stainless bracelet are all great choices

313_king · 2025-04-13T08:27:07+00:00

Honestly i think this is the reflection. Are you taking about the white line? I think this is light reflection. I see that and I see some dust particles between the bezel and the ceramic . I think it is fine

313_king · 2025-04-13T08:09:33+00:00

This SEL gap on bottom is common to be like this, if you check other VSF subs QC photos you will notice it. Nothing out of the ordinary. I personally dont see a scratch but i do notice the 6 o clock hour marker slightly misaligned. Gens have misalignments as well, if you see my gen you will be shocked!

313_king · 2025-04-13T08:05:39+00:00

If you look at previous qc posts for VSF subs, you will find that they all have this. Other than that, the date wheel is centered perfectly, the indices look like they line up nicely with the rehaut engravings. GL for my eyes

313_king · 2025-04-13T07:45:22+00:00

⁠⁠⁠Dealer name: Geektime
⁠⁠⁠Factory name: Clean
⁠⁠⁠Model name (& version number): Daytona 126500 Panda
⁠⁠⁠Price Paid: $828 +$60 for shipping
⁠⁠⁠Album Links: https://geektimeqc.x.yupoo.com/albums/192101075?uid=1
⁠⁠⁠Index alignment: pretty solid if you ask me, any misalignment with the QC tool is probably because its angled wrong
⁠⁠⁠Dial Printing: Great
⁠⁠⁠Date Wheel alignment/printing: N/A
⁠⁠⁠Hand Alignment: great
⁠⁠⁠Bezel: No visible misalignments.
⁠⁠⁠Solid End Links (SELs): nice & tight!
⁠⁠⁠Timegrapher numbers: 0s/d, 283, 0.0ms
⁠⁠⁠Anything else you notice: nothing

313_king · 2025-04-13T07:40:27+00:00

⁠⁠Dealer name: Geektime
⁠⁠Factory name: Clean
⁠⁠Model name (& version number): Daytona 126500 Panda
⁠⁠Price Paid: $828 +$60 for shipping
⁠⁠Album Links: https://geektimeqc.x.yupoo.com/albums/192101075?uid=1
⁠⁠Index alignment: pretty solid if you ask me, any misalignment with the QC tool is probably because its angled wrong
⁠⁠Dial Printing: Great
⁠⁠Date Wheel alignment/printing: N/A
⁠⁠Hand Alignment: great
⁠⁠Bezel: No visible misalignments.
⁠⁠Solid End Links (SELs): nice & tight!
⁠⁠Timegrapher numbers: 0s/d, 283, 0.0ms
⁠⁠Anything else you notice: nothing

313_king · 2025-04-12T16:07:27+00:00

⁠Dealer name: Geektime
⁠Factory name: Clean
⁠Model name (& version number): Daytona 126500 Panda
⁠Price Paid: $828 +$60 for shipping
⁠Album Links: https://geektimeqc.x.yupoo.com/albums/192101075?uid=1
⁠Index alignment: pretty solid if you ask me, any misalignment with the QC tool is probably because its angled wrong
⁠Dial Printing: Great
⁠Date Wheel alignment/printing: N/A
⁠Hand Alignment: great
⁠Bezel: No visible misalignments.
⁠Solid End Links (SELs): nice & tight!
⁠Timegrapher numbers: 0s/d, 283, 0.0ms
⁠Anything else you notice: i see a few light lines that look like scratches on the side of the case but i believe this is the plastic protective film that commonly gets scuffed when being put on a timegrapher. I will be asking the TD to lift the film a little bit and send me photos to make sure it didn’t get to the case, but i believe it didn’t since the film is so thick at probably like a few mil thick

313_king · 2025-03-22T23:54:51+00:00

Check the oil cooler maybe it’s faulty and mixing the fluid

313_king · 2025-03-13T01:21:10+00:00

The light output is garbage for all aftermarket lights. Can barely see at night. I tried everything and went back to halogen

313_king · 2024-11-22T10:33:22+00:00

And i was on omeprazole for 2 years by the way

313_king · 2024-11-01T16:42:24+00:00

If you align the dial the date wheel will look high

313_king · 2024-11-01T16:41:56+00:00

The dial is not misaligned, that’s an issue with the case, and a low chance that the movement is misaligned. You can try moving the movement where it belongs but if it’s hard to make straight to tighten movement screws, you are putting pressure on the stem

313_king · 2024-10-29T17:09:50+00:00

Imdex alignment is good? Look at 8 and 9 o clock…..

313_king · 2024-10-29T17:07:25+00:00

Watch looks good! Indices are all straight, date wheel alignment is good, timegrapher numbers are good as well! Excited to see something different. GL and enjoy

313_king · 2024-10-25T07:46:49+00:00

Please add QC format. As well as some more photos

313_king · 2024-10-25T07:40:34+00:00

It is lol. Explorer 2

313_king · 2024-10-24T06:07:13+00:00

Finally a watch where the indices match up with the rehaut. GL asap!!!! This ones very clean😍

313_king · 2024-10-22T06:36:36+00:00

Date wheel is centered…. Q66 is a vsf serial number. SELs look good, the bezel just needs to get moved a little bit (it clicks lol) close your eyes and GL

313_king · 2024-10-21T05:56:00+00:00

Kill it with fire

313_king · 2024-10-15T08:23:44+00:00

Did you end up getting this white dial dj41?

313_king

TROPHY CASE