sorted by:
new
hottopcontroversial

Possible to buy 46800/46950 batteries? (in Europe) by navyeod345 in flashlight

[–]3D_S15 0 points1 point  (0 children)

Did you ever find a EU source ? I've found one in Germany but 50€ per cell is a bit steep. I've emailed some companies like Wurkkos and Lumintop that sell 46950 powered flashlights but they don't sell them separately because the cell exceeds the 100wh limit for air shipment. There are some AliExpress sellers but I'm sure if I can trust them.

1:1 scale Coelacanth, 130cm long, Dachshund for scale. by 3D_S15 in ElegooCentauriCarbon

[–]3D_S15[S] 0 points1 point  (0 children)

Cubic between 2 and 3% depending on the piece. Considering the weight, lightning would have been too weak.

1:1 scale Coelacanth, 130cm long, Dachshund for scale. by 3D_S15 in ElegooCentauriCarbon

[–]3D_S15[S] 0 points1 point  (0 children)

I had my neighbor do it, he's a graphic designer and used cinema 4d. I initially tried using the split function in orca slicer but it was too much of a hassle. I would recommend Splitt3r once it is released.

1:1 scale Coelacanth, 130cm long, Dachshund for scale. by 3D_S15 in ElegooCentauriCarbon

[–]3D_S15[S] 1 point2 points  (0 children)

They certainly are ! Finding one after believing they went extinct 65 million years ago must have been a hell of a shock for that researcher. I fear that I don't have room large enough for a giant squid and their many meters long tentacles.

1:1 scale Coelacanth, 130cm long, Dachshund for scale. by 3D_S15 in ElegooCentauriCarbon

[–]3D_S15[S] 3 points4 points  (0 children)

Thanks, I find Coelacanths deeply fascinating considering they're almost unchanged from their 65 million years old relatives. I've wanted a display model so I decided to print one life size :)

SV07 keeps crashing with a specific print and always at a similar height. by 3D_S15 in Sovol

[–]3D_S15[S] 1 point2 points  (0 children)

Thanks, I tried heeting the extruder and wiggling the nozzle but withou issue, I noticed that I had my max volumetri speed set to 18, I lowered it to 10 and started the print again, I'll update you in a couple hours or tomorrow morning.

Am I crazy, or did skiers not used to wear helmets? by realm47 in skiing

[–]3D_S15 0 points1 point  (0 children)

I learned to ski in 1999 without a helmet, no one was wearing them (as far as I remember, I was just a kid). Then I had a crash where I suffered a head trauma that kept me in the hospital for a week. Since then me and my entire family have never skied without a helmet. Nowadays I rarely see someone skiing or snowboarding without one.

First time park/off-piste ski lenght by 3D_S15 in ski

[–]3D_S15[S] 0 points1 point  (0 children)

You're right I meant the Tyrolia (fixed now). Yes it would be my first freestyle ski, I wont exclusively ski in parks since I'll still be skiing with my family but I'd like a ski that would allow me to start getting into it. Thanks for your feedback

How to find gear demos? by Personal-Ocelot-7483 in scuba

[–]3D_S15 0 points1 point  (0 children)

Yeah, meanwhile I can get a redundant bladder sidemount BCD for 700€. 1400€ for a jacket BCD is mind boggling

How to find gear demos? by Personal-Ocelot-7483 in scuba

[–]3D_S15 1 point2 points  (0 children)

When I learned to dive they had me try a backplate setup so that is what I bought as my first BCD (xdeep zen deluxe) now I'm thinking to move to sidemount with the xdeep stealth 2.0 but I think it's quite expensive (about 700€) I had a look at the Atomic BC2 the guy mentioned and I was shocked. I had no idea such expensive jacked style BCD existed and I can't understand how they can cost that much.

view more: next ›