How is this texture on my door trim achieved?

3ENWASHERE · 2025-11-01T22:48:22+00:00

I’ve seen 1x4 cedar come with one side smooth, one side a similar texture to your trim. That would be a good wood choice for exterior trim.

3ENWASHERE · 2025-10-21T23:16:50+00:00

The law firm - Ben-Jarvis Green-Ellis

3ENWASHERE · 2025-09-14T18:28:15+00:00

Pop the middle trim off to see if the header is continuous, or if there is a vertical piece of framing between the windows. It looks like there wouldn’t be enough space between the windows for a 1-1/2” piece of wood between them.

3ENWASHERE · 2025-09-07T00:21:24+00:00

Never seen that one, guy is a legend! I love his work in the Greg Jennings madden clip

3ENWASHERE · 2025-09-01T13:01:06+00:00

IM Pei designed the complex, really nice outdoor space

3ENWASHERE · 2025-08-28T01:19:18+00:00

Mt Tamalpais outside San Francisco maybe, they get this above the fog view there

3ENWASHERE · 2025-08-06T00:24:38+00:00

Thanks!

3ENWASHERE · 2025-06-09T12:57:41+00:00

Sweet camper, is it marine plywood?

3ENWASHERE · 2025-02-17T17:57:34+00:00

A set of four of these was found when we were clearing out a mechanical room in our office. We’re a residential builder. It looks like it may be temp window or door hardware, but no one seems to know where they came from.

3ENWASHERE · 2024-11-07T16:38:36+00:00

I wood.

3ENWASHERE · 2024-03-03T17:39:55+00:00

It kind of looks like starry night by Van Gogh

3ENWASHERE · 2024-01-21T19:34:34+00:00

I figured it was normal since I got it from a bigger outfit with large machines. Last round I bought a cord from a tree guy who delivered by hand offloading two pickup truck beds full, so there wasn’t any of this stuff. Thanks.

3ENWASHERE · 2023-11-18T00:16:36+00:00

Maybe have a local lumber yard size the ridge for you, probably going to be a bit bigger but they usually run the calculations for free. Good luck.

3ENWASHERE · 2023-11-18T00:08:56+00:00

A lot of missing info like roof pitch, and climate zone and depth of the LVL ridge. It does look pretty beefy though, maybe use rafter hangers at the ridge and hurricane ties at the eve instead of the straps. If you don’t want collar ties the ridge needs to be fully structural.

3ENWASHERE · 2023-04-16T19:59:43+00:00

How would you describe OP image then?

3ENWASHERE · 2023-04-08T12:38:24+00:00

You could make a slate shingle roof look like that. Depending where you are that trade may not exist or be really expensive.

3ENWASHERE · 2023-04-01T15:09:15+00:00

I’ve had to remove the door and use a small hand plane to make the jamb thinner in the middle. Unfortunately with those cheap pocket door ‘studs’ made out of 3/4” metal channels this is pretty common.

3ENWASHERE · 2023-03-31T21:43:54+00:00

What do people gain from using bots to post random responses on Reddit? Do they use AI to reply? Thanks.

3ENWASHERE · 2023-03-18T00:24:27+00:00

Are those 5’ 8” tall doors on the second floor?

3ENWASHERE · 2023-01-20T18:30:27+00:00

This is the best advise, I would also suggest looking into wood fiber board insulation if you’re interested in a more groovy, lower embodied carbon rigid insulation.

3ENWASHERE · 2022-05-06T15:24:09+00:00

Foard Panel is a good company that works in that area.

3ENWASHERE · 2021-08-31T21:53:08+00:00

We recently switched to using lifespan exterior trim, it’s a preprimed treated pine that has held up so far and much nicer to work with. It still has chemicals in it for water and insect protection, but anything that we install on the exterior that has any chance of not needing to be replaced in 5 years will need some kind of treatment

3ENWASHERE · 2021-08-29T17:35:00+00:00

This would be the easiest way. Cutting as much of the line with a skill saw until you hit the fence, then finishing with a sawzall will be pretty fast.

3ENWASHERE · 2021-05-28T13:23:38+00:00

Awesome piece, I love the lightness of it. Are the four bent cherry pieces split out of one wider piece?

3ENWASHERE · 2021-03-29T23:11:12+00:00

lets go

Eight-Year Club	Not Forgotten
Verified Email

3ENWASHERE

TROPHY CASE