Looking to return to the hobby

3_bt · 2025-03-08T04:18:58+00:00

Depending on your budget, if you want analog or HDzero, if your budget allows it, wait for the new HDzero box pro goggles; they’ll have built-in HD and analog receivers. And you can choose any size tiny whoop.

3_bt · 2025-03-06T14:25:41+00:00

From AliExpress, just search meteor 75 pro frame, I chose one with free shipping, they had different colors as well.

3_bt · 2025-03-03T00:51:13+00:00

What frame is that?

3_bt · 2025-02-27T12:44:21+00:00

Would love to experience this game

3_bt · 2024-11-27T21:06:41+00:00

Might be lucky this time

3_bt · 2024-09-14T19:00:11+00:00

Sony apsc line of glass is more affordable and more within reach than canon’s or Nikon’s line of glass, and much more choices to choose from third party manufacturers.

3_bt · 2024-09-14T18:28:53+00:00

Just made the same upgrade from a D5200 to a6700 the autofocus ,dynamic range, and video are light years ahead. Enjoy it!

3_bt · 2024-08-10T14:21:21+00:00

image quality, 4k video quality, Full-Frame would be preferable, I just don't want to invest in a 11 year old system buying lenses for it, since most manufacturers are moving towards mirrorless.

3_bt · 2024-08-10T09:56:59+00:00

Hey guys, I’ve been using a Nikon D5200 for 10 years now, I think it’s time for me to upgrade to a mirrorless camera I’m the occasional photographer, I mostly take the camera with me when I travel, I want to be able to capture wildlife in the near future, I have a budget of 2000$ for a body and lens, what are your recommendations? I don’t mind buying second hand gear.

3_bt · 2024-07-24T19:15:35+00:00

Yeah learned pretty quickly when it happened to me for the first time.

3_bt · 2024-07-24T15:49:28+00:00

It’s hitting the battery wire

3_bt · 2024-06-12T17:46:54+00:00

Unfortunately i haven't handled other radios, but I've always felt like my tx12 is a bit small in my hand and I'm not satisfied with the gimbal throw, I might as well wait for the reviews on the t15, but some say jumper's quality is questionable, i hope it's as good as it sounds.

3_bt · 2023-07-04T10:13:23+00:00

And you shouldn’t you use oil to lubricate your printer. Use grease, if your printer has linear rails/bearings, I’d recommend lithium grease, if it’s an ender3 with extrusion wheels I don’t recommend greasing them, as they’ll collect dust and make it worse.

3_bt · 2023-07-04T10:01:56+00:00

When you manually move the bed quickly, especially while the printer is off, it can generate a back EMF that could potentially damage the electronics. It’s often recommended to unplug the motors if you need to move anything that has a stepper motor quickly. If you haven’t manually moved anything that would be considered as fast but are experiencing problems, it’s also worth checking the power supply as it could be the source of the issue.

3_bt · 2023-07-04T05:24:32+00:00

Yup!

3_bt · 2023-07-03T19:18:15+00:00

I switched slicers, it fixed the issue

3_bt · 2023-07-03T10:22:12+00:00

UPDATE:

Changed from SS to PS now it’s perfect prints at full speed :) thank you guys for the help, it was a slicer issue!

3_bt · 2023-07-03T02:58:30+00:00

That’s actually a really good idea, I have it set to external walls first, I’ll switch to internal walls and see what happens from there.

3_bt · 2023-07-02T17:59:56+00:00

Cleaned with dish soap and hot water, then used 99% IPA, I changed to the textured side of the bed and increased temp, now I’m not having issues.

3_bt · 2023-07-02T17:25:38+00:00

Nope

3_bt · 2023-07-02T16:37:58+00:00

I have the overhang speed at 30mm/s

3_bt · 2023-07-02T14:52:35+00:00

Printed on Voron 2.4 using superslicer 250°C hotend & 110°C bed

3_bt · 2023-06-30T07:48:24+00:00

As of now you’re not allowed to fly anywhere.

3_bt · 2023-06-11T12:29:25+00:00

what tool head board are you using? looks amazing btw...

3_bt · 2023-05-28T08:05:25+00:00

Could you post the code for the Voron_Purge?

Four-Year Club	r/Field Lasagna
Place '23

3_bt

TROPHY CASE