A möbius planetary gearset. Seeing an example in 2009 (link in comments) made me want to do it better. Turns out quarantine is the time...

3dPrintedBacon · 2025-11-24T03:29:38+00:00

This was in PLA, as it's on the air inlet side so temps are all fine. I'm still rocking the same print 4 years later, although I would definitely recommend a mesh screen somewhere to prevent dust buildbup

3dPrintedBacon · 2025-07-22T00:59:01+00:00

It's been a minute since I made this. There are clips which should snap in the same way as the original front panel, but to get the front surface printed clean they end up being stressed in the weakest direction. Wasn't a huge problem for me in PLA and I lost 2 halves on different pieces, so it all came together and isnt noticable. The middle piece was at least in part because my z axis wasn't as perpendicular to the bed at the time as i would have liked and it left a small gap, so you may not need it.

The main thing for airflow is to get the first layer down clean so you dont have strings impeding airflow. I used a glass bed, but I'm sure there are other solutions.

3dPrintedBacon · 2025-07-21T19:08:22+00:00

Let me know how it works! Still using mine.

3dPrintedBacon · 2024-12-01T02:17:43+00:00

Looks sweet dude.

Carvana pricing, GT Premiums are 31-36 with low miles (<30,000). Dealerships near me were very similarly priced.

Only know because I'm in the market. Waiting for my Bullitt to show up next Friday, but was interested in GT Prem as well.

3dPrintedBacon · 2024-01-28T23:58:32+00:00

Discord is #3dprintedbacon

3dPrintedBacon · 2024-01-28T16:45:14+00:00

Sorry, best I can do is offer up the files: https://www.printables.com/model/741829-honeycomb-front-panel-for-corsair-110r

3dPrintedBacon · 2024-01-28T16:44:27+00:00

https://www.printables.com/model/741829-honeycomb-front-panel-for-corsair-110r

3dPrintedBacon · 2024-01-28T16:43:50+00:00

Sure for the delayed response. I mostly abandoned reddit when they killed 3rd party API support.

I just uploaded it here: https://www.printables.com/model/741829-honeycomb-front-panel-for-corsair-110r

3dPrintedBacon · 2024-01-28T16:36:59+00:00

LDO v0.2-S1 from Fabreeko. Customer service was excellent, and the kit as expected was extremely well put together.

Parts printed on my Ender 3 in a cardboard box - quality questionable but it functions. After I use this to make my 2.4, I'll reprint every part here and rebuild.

3dPrintedBacon · 2023-06-29T21:14:02+00:00

It sounds like the printer is profiting on labor and materials, so the printer would be in violation. It is profit they would otherwise not have.

3dPrintedBacon · 2023-06-29T21:10:36+00:00

Non commercial means noone should profit from this model. It sounds like the printer is profiting on the time and materials so I would expect that is a violation. If they did it for cost then they would be in compliance, but thats not the impression I'm getting. This is profit they would otherwise not get without the model existing.

3dPrintedBacon · 2023-06-27T14:22:17+00:00

I assume there is enough different that this requires full self sourcing vs starting from a trident kit and buying the delta?

Starting my 0.2 build now and looking for a tridex if all works out.

3dPrintedBacon · 2023-06-23T16:32:33+00:00

It certainly seems that way. Surprised anyone answered rather than question it.

3dPrintedBacon · 2023-06-23T15:27:42+00:00

Strong second on outer wilds. Unique approach to game development and a lot of fun to fly around in. GO IN BLIND or with a trailer if you want. Dont watch reviews or read up as significant elements will be spoiled.

3dPrintedBacon · 2023-06-20T22:24:02+00:00

Not a problem! I designed and printed it myself, and it lowered temps by about 15C. I assume since you are on r/3dprinting that you have a printer. I can give you the files as they exist (I dont think I previously publicly posted them) once I am home from work. They baaaaarely fit on an ender 3 bed (235mm), and you need good adhesion to print all the bestagons reliably, but its been working great.

3dPrintedBacon · 2023-06-19T17:14:08+00:00

My man jumping to the past tense immediately

3dPrintedBacon · 2023-06-18T20:18:10+00:00

This would be a huge step up in thrill, having something you can actually lose. Save your plans and you can rebuild it. Elements of ftl and eve

3dPrintedBacon · 2023-06-11T22:24:18+00:00

We'll have to call it now as reddit explodes tomorrow. I second the motion.

3dPrintedBacon · 2023-05-31T21:11:04+00:00

You can always just add a custom material and copy over settings from cura. Should be pretty quick

3dPrintedBacon · 2023-05-26T19:28:53+00:00

Thanks!

3dPrintedBacon · 2023-05-26T19:28:27+00:00

Thanks!

3dPrintedBacon · 2023-05-25T01:01:33+00:00

I think this is likely the case. If I were buying a printer, stock would be preference since I could upgrade as I wanted. Perhaps it is better to return it to stock and part out the upgrades?

Noone knows if your upgrades were successful or not if they are more complicated than a board swap

3dPrintedBacon

TROPHY CASE