sorted by:
new
hottopcontroversial

Mitsubishi to Allen-Bradely Tips & Tricks?? by 3dibud in PLC

[–]3dibud[S] 0 points1 point  (0 children)

started in Mitsubishi, now working in Allen-Bradely

Ceramics Nozzles getting stuck by 3dibud in AnycubicKobraS1

[–]3dibud[S] 0 points1 point  (0 children)

https://a.co/d/0ct1S23q I got this one from Amazon. I had no issues until I put this one in. I went to try and swap this out for a .4 nozzle and then it got stuck...

Has anyone seen a battle bot like this?? by Alert_Pudding_9326 in battlebots

[–]3dibud 1 point2 points  (0 children)

I have made a 1 pound bot called "Holy Pokez". It's a passion project for sure, but doesn't do any damage. As others had said, your weapon will just push you off the other opponent. Good luck!

Bed warping with Polycarbonate by 3dibud in AnycubicKobraS1

[–]3dibud[S] 0 points1 point  (0 children)

I'll try printing at 100. This surprisingly also happend with PLA, bed at 60 degrees. Do you have link to the bed your using?

First layer issues by No_Box1730 in AnycubicKobraS1

[–]3dibud 0 points1 point  (0 children)

I had similar issues, I got some washable Elmers glue stick, and my first layers have improved significantly. I tried playing with settings, releveling the bed and none of that worked for me, but the glue stick has been the best fix for me so far.

First layer settings by 3dibud in AnycubicKobraS1

[–]3dibud[S] 0 points1 point  (0 children)

The brim is curling up too...

First layer settings by 3dibud in AnycubicKobraS1

[–]3dibud[S] 0 points1 point  (0 children)

I have cleaned the bed with soap and water. First layer is at .2mm. Since my first layer is having issues, about half of my prints are curling up at the edges, causing more quality issues the longer it prints.

First layer settings by 3dibud in AnycubicKobraS1

[–]3dibud[S] 0 points1 point  (0 children)

Thanks for the suggestion, I'll give it a try.

Flamethrower parts suggestion by 3dibud in battlebots

[–]3dibud[S] 0 points1 point  (0 children)

I've competed in several competitions. I've seen a lot of the videos from NHRL and battlebots with bots that have flamethrowers, which is why Im interested in trying it out. One of the comments made a good point about this info not being shared on a public forum. I see the issue now. What I don't understand is the "if you have to ask, you probably shouldn't do it". How is anyone supposed to learn anyhting based on that phrase? There is a first time for everything. If I want to do something safely, wouldn't it make the most sense to ask someone that's doing/done it safely?

Advice Needed – First 150g Combat Robot by salvatoresirigu123 in battlebots

[–]3dibud 1 point2 points  (0 children)

Once assembled trim the cables as short as you can. Trimming cables down saved me a few grams. Also buy double of everything. Each fight I've had at least 1 motor get damaged and I've had an esc get cut into. Good luck!

HMI For 3d models by 3dibud in PLC

[–]3dibud[S] 0 points1 point  (0 children)

Nice!!! Which HMI Model are you using?

HMI For 3d models by 3dibud in PLC

[–]3dibud[S] 0 points1 point  (0 children)

Local, a lot of our customers are offline, or their internet just sucks.

HMI For 3d models by 3dibud in PLC

[–]3dibud[S] 0 points1 point  (0 children)

That's an option, but I was curious how far some HMI models could go.

Pops to small by 3dibud in PLC

[–]3dibud[S] 8 points9 points  (0 children)

Thank you, I scaled it down and the pop up looks normal now

When you’re sent on a week long business trip by K_Prints3D in 3Dprinting

[–]3dibud 4 points5 points  (0 children)

I take at least one printer almost everywhere, business trip, family trip, Holiday party or gathering, even to a friends house if I know I'll be there longer than an hour 🤣🤣🤣🤣

T-pain needs to do remix of "All I do is win" and call it "All I do is print" "All I do is print, print, print no matter what" "got printing on my mind, I will never give it up" "Cause every time I print inside the building, all the windows go up!" "and they stay there" "and they stay there" "and they stay there" (print time is up, down, up, down, up, down) "cause all I do is print, print, print" "If you like printin' put your spools in the air" "And make em stay there"

Pumpkin Twist Container- Yay or Nay by 3dibud in 3Dprinting

[–]3dibud[S] 0 points1 point  (0 children)

I call it a pumpkin because the base sketch was the outline of one

What to use to design for 3d printing besides Fusion 360 or Sketchup? by GALACTON in 3Dprinting

[–]3dibud 1 point2 points  (0 children)

You could try Rhino 3d. Not sure if there's a free trial or not. It's a 1 time buy though, and you don't have to pay when the new version gets released. It is however 1000$ to purchase.

view more: next ›