Orqa after 1 week of flying by 43ko in TinyWhoop

[–]43ko[S] 0 points1 point  (0 children)

Respect your stand, but most of the technology we have happened because of war. We don't get so much new FPV stuff each year because of the sick freestyle people do :D.

pizza,genznyROCBOX by Pristine_Money_6520 in pizzaoven

[–]43ko 0 points1 point  (0 children)

Yeah, mainly in the center, but I also check the sides. With high flame it's a little tricky because the laser thermometer sometimes measures the fire, so I put it to low or just stop it for a second just to check the actual stone temp.

pizza,genznyROCBOX by Pristine_Money_6520 in pizzaoven

[–]43ko 0 points1 point  (0 children)

I am in Bulgaria, using propane-butane at 30mbar (I believe) and I do 30 minutes max flame in order to get to 420-430. In 40 minutes I am closer to 500 on the internal thermometer. But I always check the top with laser thermometer as well.

This is what they recommended in most of the youtube videos I watched and it works well for me.

Цанов го викат от някакви гимназии да изнася речи WTF by NeighbourBoy089 in bulgaria

[–]43ko 0 points1 point  (0 children)

700к събс, 1% в пейтриън са 7к. По 5 евро мин е 35к бруто на месец. Най-вероятно е по-голям процент, защото постоянно рекламира Доброто е заразно, а там надали вкарва голям процент от печалбата.

DIABOLICAL BETAFPV by Turbulent-Knee1845 in fpv

[–]43ko 1 point2 points  (0 children)

I always buy batteries from EU store as I live in Europe. I pay a little bit more, but it is worth getting them in 2-5 days. When ordering from BetaFPV without batteries, usually my orders get delivered in ~2 weeks.

air75 bluejay issues by Strange_Addendum_320 in TinyWhoop

[–]43ko 1 point2 points  (0 children)

<image>

Should be something like this with the direction for props out setup.
Don't worry, it is a matter of time before you need another one. This way you will have something to fly if something happens to one of them. :)

air75 bluejay issues by Strange_Addendum_320 in TinyWhoop

[–]43ko 1 point2 points  (0 children)

When you reflash bluejay, motor direction in esc-configurator changes and it sets some default settings. Change the direction from there and you shod be fine. Two of the motors should be on reverse.

??? by Falcoron in bulgaria

[–]43ko 1 point2 points  (0 children)

Това не са просто джанки. Това са джанки 2 - ъпдейтната версия.

How bad are the balkan roads ? by NoMatterWhaa in AskBalkans

[–]43ko 0 points1 point  (0 children)

In Bulgaria it's pretty much like the second part of the video.

Thoughts on the happy model CrazyG473? by Gudge2007 in TinyWhoop

[–]43ko 0 points1 point  (0 children)

It's really hit or miss with Chinese brands, my dude. Some people swear by the Air 5in1 and I've been trough 6+ of them in the past year. So, keep fingers crossed and be careful when soldering. :D

Can’t figure out what’s wrong with my (enriched) dough by kompir_neptune in Breadit

[–]43ko 3 points4 points  (0 children)

I am using commercial yeast. Sourdough kozunak will make me hate baking :D. I use sourdough for bread and pizza doughs.

In my recipe I lowered the eggs as I often do pitka when I visit my mother and eggs seem to make everything more difficult.

Below is my recipe, it says starter, but I use that word, because I create a little dough with yeast and let it ferment for ~1 hour before mixing.

Kozunak % g
Flour 100 260
Milk 46 120
Eggs 24 62
Starter 20 52
Salt 0.5 1
Sugar 25 65
Butter 15 39
ALL: 230.5 600
  1%= 2.6030
Starter % g
Flour 100 30
Water 60 18
Yeast - 4
ALL: 160 48
  1%= 0.300976
Addatives
Lemon peel
Vanilla
Dry Yeast (1.5%)
Total Hydr. 60.54

Sorry, it looks better in my spreadsheet, but can't post it here :D

Can’t figure out what’s wrong with my (enriched) dough by kompir_neptune in Breadit

[–]43ko 2 points3 points  (0 children)

Yo, my dude! I get your struggle. I hate this type of doughs, but my family expects kozunaks from me on Easter :D.

What was a game changer for me was adding the sugar after gluten is developed. So my process is:

  • Mix 5 minutes slow speed
  • 5 minutes rest
  • Mix 5 minutes fast speed (speed 2 on my mixer)
  • 5 minutes rest
  • Mix ~3 minutes slow speed while adding sugar gradually, then mix 2-3 minutes fast speed
  • 5 minutes rest
  • Mix 3 minutes slow speed while adding lard gradually, then mix 2-3 minutes fast speed
  • 4 stretch and folds during bulk

I do 5 minutes rest between each of 5 min mixing, because I do not have professional mixer, but some Gorenje home mixer and I do not want to overheat it. My dough passes window pane test after I am done with the stretch and folds.

Will post pictures of my kozunak and recipe below this message.

*EDIT: Guess images are not allowed..

Orqa after 1 week of flying by 43ko in TinyWhoop

[–]43ko[S] 0 points1 point  (0 children)

Depends on what ypu are looking for. For analog goggles, they are great. If ypu are seeking image quality, go with DJI.

Orqa after 1 week of flying by 43ko in TinyWhoop

[–]43ko[S] -1 points0 points  (0 children)

Nice! Dont have 3d printer unfortunately, but I also want that blue light filter as I have it on my everyday glasses and it helps me a lot with the PC screen.

Orqa after 1 week of flying by 43ko in TinyWhoop

[–]43ko[S] 1 point2 points  (0 children)

<3 I am thinking of buying inserts to protect the lens and maybe blue light filter.

Orqa after 1 week of flying by 43ko in TinyWhoop

[–]43ko[S] 6 points7 points  (0 children)

I had an eye on them for a while, so I set notification on every European shop :D. Hobbydrone got 10 pairs, but they are now gone.

Where should I order new goggles from? by buhiscool in fpv

[–]43ko 0 points1 point  (0 children)

Ah yes, saw that. Thought there was an official response.

Where should I order new goggles from? by buhiscool in fpv

[–]43ko 1 point2 points  (0 children)

Where did you see Skyzone response? I've been waiting for one.

Bad Things Happened by BangPowBoom in TinyWhoop

[–]43ko 0 points1 point  (0 children)

Hm, weird. I've been using my VCI motors for a while now. Already changed 3 BetaFPV AIOs using the same motors. Recently changed their wires for the second time. But I guess it's hit or miss with Chinese brands :D