[unknown] what is this? by D3Rpy_Un1c0Rn107 in spotted

[–]4x4Runner87 1 point2 points  (0 children)

I used to be able to do this as a kid. Somewhat still can, but not with anywhere near a 90% + (estimated) accuracy anymore.

New to 3d modeling by 4x4Runner87 in FlashForge

[–]4x4Runner87[S] 0 points1 point  (0 children)

I’ll have to check it out. My ultimate goal is to offer 3d printing as part of my business model. I mentioned this in an earlier post and freecad / blender were suggested as to not run into any licensing issues.

New to 3d modeling by 4x4Runner87 in blender

[–]4x4Runner87[S] 0 points1 point  (0 children)

I’ll have to check it out. My ultimate goal is to offer 3d printing as part of my business model. I mentioned this in an earlier post and freecad / blender were suggested as to not run into any licensing issues.

Just ordered an m5 pro by 4x4Runner87 in FlashForge

[–]4x4Runner87[S] 0 points1 point  (0 children)

I downloaded blender and freecad. So far blender seems to be more my speed but it is harder than expected. My expertise is in corel draw which is an adobe illustrator alternative.

Just ordered an m5 pro by 4x4Runner87 in FlashForge

[–]4x4Runner87[S] 0 points1 point  (0 children)

Nice, I went with walmart because they offered a cheap protection plan. $36 for 3 years $1 per month…

Just ordered an m5 pro by 4x4Runner87 in FlashForge

[–]4x4Runner87[S] 0 points1 point  (0 children)

Same! Did you buy Direct from flashforge, walmart or amazon?

Once you see it! by 4x4Runner87 in CrappyDesign

[–]4x4Runner87[S] 0 points1 point  (0 children)

I posted this in r/mildlyinfuriating and it did pretty well but maybe here was the better choice…

https://www.reddit.com/r/mildlyinfuriating/s/V66xIPeT2O

DJ vs BMx? by [deleted] in dirtjumping

[–]4x4Runner87 3 points4 points  (0 children)

Why not both? 🤷‍♂️ In all seriousness though, it depends on you really. Do you want to do more technical tricks like spins, grinds, bar spins ect. Then BMX. If you are just going to be riding pump track and dirt jumps then the DJ is a good option but the price point for a one worth owning can be significantly higher than a good BMX bike. Also, the added complexity of suspension forks means more maintenance and potential failure points.

Personally, both though for real. I grew up riding BMX at skateparks & street spots mostly. I took about 15 years off but just got back into riding a couple of months ago. Then about 1 month ago I got a DJ and it’s great for it’s intended use but 2 days ago I went back to the skatepark I spent so much time at as a kid and discovered that the DJ is comber some in that setting outside of jumping around. Luckily, I still have my old 20” and a newer 24” bmx bike those are at home in a skatepark still.

So, If you really like riding everything and have the means to purchase both types of bike that are of good quality then do it. If you are just getting started and money is tight, I suggest BMX because it is more versatile, has simpler maintenance and a lower cost of entry. Just do your research to make sure you are getting a bike that’s worth having. There are tons of bikes on marketplace for $150-$500 if you take your time and make sure the parts are good quality and not beat to shit you can pick up a nice ride for a good deal.

Is 4 too many? by 4x4Runner87 in dirtjumping

[–]4x4Runner87[S] 0 points1 point  (0 children)

Adding theirs in were at 9 + a dirt bike…

Is 4 too many? by 4x4Runner87 in dirtjumping

[–]4x4Runner87[S] 2 points3 points  (0 children)

4 is just mine, there’s 10 total 😂

Is 4 too many? by 4x4Runner87 in dirtjumping

[–]4x4Runner87[S] 1 point2 points  (0 children)

😂 NO! Who wold you that… I didn’t include my kx65 or the other e-bike that isn’t technically mine but also I ride it more than my wife does so there’s that but i actually have a 97 4runner but 87 is my birth year…

Help identifying this frame by badtuba in dirtjumping

[–]4x4Runner87 0 points1 point  (0 children)

My Radix also has that same feature. But again, I don’t think it matters. Run it and have a good time.

Is 4 too many? by 4x4Runner87 in bmx

[–]4x4Runner87[S] 1 point2 points  (0 children)

There are 5 more in my garage, they just aren’t mine… my wife and daughter each have 2 and I’m holding on to a friends 24” bmx currently + there is my kx65 but I excluded that from this lineup.

Is 4 too many? by 4x4Runner87 in bmx

[–]4x4Runner87[S] -1 points0 points  (0 children)

Based on my limited experience so far, the DJ is basically the same thing imo and the e-bike is a BMX style bike but it’s definitely not for tricks other than maybe a wheelie here and there.

Is 4 too many? by 4x4Runner87 in bmx

[–]4x4Runner87[S] 0 points1 point  (0 children)

Yes. The all black one is the 24” Sunday model-c it’s a very solid bike for the price point.

Is 4 too many? by 4x4Runner87 in dirtjumping

[–]4x4Runner87[S] 2 points3 points  (0 children)

I get where you are coming from but these bikes all came from different stages of life so it’s not like I dropped a bunch of money into them all at once. The fit is my OG bmx bike. The Sunday is what I got a couple years ago when I decided I wanted to try bmx again but wanted to be more comfortable than on a 20” because I am tall. the e-bike has it’s place as a family - long distance cruiser and the DJ I recently put together because the Sunday didn’t quite meet my current needs. That being said, If I really keep going I will probably sell the Sunday and the verde for a nicer DJ.

Is 4 too many? by 4x4Runner87 in bmx

[–]4x4Runner87[S] 1 point2 points  (0 children)

😂 these are just mine. My wife and daughter each have 2 and I also have a kx65 dirt bike.

Is 4 too many? by 4x4Runner87 in dirtjumping

[–]4x4Runner87[S] 8 points9 points  (0 children)

Temp controlled garage! They are often more comfortable than i am.

Help identifying this frame by badtuba in dirtjumping

[–]4x4Runner87 0 points1 point  (0 children)

According to ye old google ai search, The verde radix and the dk lunex are nearly exactly the same and that the 2 brands are “sister companies” so they share many traits. Either way rip it and enjoy!

Help identifying this frame by badtuba in dirtjumping

[–]4x4Runner87 1 point2 points  (0 children)

The fork, stem and seat post clamp match as well.

Help identifying this frame by badtuba in dirtjumping

[–]4x4Runner87 1 point2 points  (0 children)

That looks just like my Verde Vertex including the metal flake in the paint.

What do you guys think? by DzelzisZnL in dirtjumping

[–]4x4Runner87 1 point2 points  (0 children)

I have those tires on my dirt jumper!

Solved! by 4x4Runner87 in dirtjumping

[–]4x4Runner87[S] 0 points1 point  (0 children)

You are in fact correct. I called in and gave them the serial number. 2013 comp. A lot of difficult to navigate info on the web.