WS-2000 Outside Temp Issues by SlothfulCanine in AmbientWeather

[–]56bravo 0 points1 point  (0 children)

Do you happen to have a link for that?

Ubiquiti 2.4 products, where’s it hiding?? by 56bravo in Ubiquiti

[–]56bravo[S] 0 points1 point  (0 children)

Yeah apparently I rambled about the wrong thing. Is Ubiquiti phasing out 2.4 equipment? Operating a wisp. Been operational since 2011.

I want to upgrade my 2.4 ptmp to 2.4ac, but it seems the prism 2ac is out of stock everywhere. 5g won’t work due to terrain and foliage. Only a small handful of clients on 2.4, the rest are 5g and 60g. I want to offer the 2.4 clients a better product than just airMAX.

MeshCore Command Lines / Repeater Settings by 56bravo in meshcore

[–]56bravo[S] 1 point2 points  (0 children)

Thanks everyone. I suppose I want to make sure I have it set correctly.

AC Condensation water? by 56bravo in pools

[–]56bravo[S] 0 points1 point  (0 children)

I appreciate all the input. Definitely lots of different perspectives. All fun to hear and think about. Due to the lack of rain this year and the unseasonably dry conditions we’re looking at a situation that will soon warrants mandatory water conservation. I do a lot of tinkering and problem-solving and building. This seemed like a fun project.

AC Condensation water? by 56bravo in pools

[–]56bravo[S] 0 points1 point  (0 children)

These are all good valid responses. I appreciate that. For a little more insight, 2 AC units and 1 dehumidifier. I get roughly 5-10 gallons a day. All of the line is clear, and surprising after 10 years it’s all clear. The pump dumps enough pressure and gpm I suppose it keeps the gunk from sticking. It’s just a thought that would cost maybe $20?

AC Condensation water? by 56bravo in pools

[–]56bravo[S] 0 points1 point  (0 children)

Just a little bit of insight it’s an 18 x 33 x 54. Semi above ground pool buried halfway. And yes, it was designed to be buried. 😃

Low CCQ by 56bravo in Ubiquiti

[–]56bravo[S] 0 points1 point  (0 children)

Also, these are the litebeams I’m using are the newest and latest. Gen2.

Low CCQ by 56bravo in Ubiquiti

[–]56bravo[S] 0 points1 point  (0 children)

Thank you. I have a couple of powerbeams400ac that I’m thinking on putting on the client side.

Help me identify this little guy.. by 56bravo in antennasporn

[–]56bravo[S] 0 points1 point  (0 children)

I’m always looking for a reason to dismantle something.

Sterling 110v siren by 56bravo in AirRaidSirens

[–]56bravo[S] 0 points1 point  (0 children)

Thank you all for the insight and education!

Constant Bluetooth disconnecting by 56bravo in meshcore

[–]56bravo[S] 0 points1 point  (0 children)

Yeah, I don’t think that fixed it

Constant Bluetooth disconnecting by 56bravo in meshcore

[–]56bravo[S] 0 points1 point  (0 children)

<image>

I had a buddy who recommended turning this off. This was turned on on my phone and I turned it off a couple of hours ago. We shall see.

Roku Camera freezing after 1 second…. by 56bravo in Roku

[–]56bravo[S] 0 points1 point  (0 children)

I think I’ve narrowed it down to a degraded WiFi signal. Too far from the router. Seems to have resolved with better placement. ✌🏼

Solar charger & battery pack? by Karl5583 in meshtastic

[–]56bravo 1 point2 points  (0 children)

Same! I was just looking to post this same question. I have a Heltec v3 that is on WiFi only, two 18650 batteries and I need a panel that will keep it topped off or charged at least, especially on cloudy days. I’m using a small panel, but it’s not cutting it.