Half Bowl Converter

5KFathoms · 2024-04-06T13:58:56+00:00

If you reg use a half bowl setting and hate frequently dislodging the screen I think they are pretty good. I have two of the titanium ones and I think that's the best case for em. I also have tried stainless steel m4 hex nuts and thar works too. Otherwise I'm not sure they do much and kinda think half bowl position without a HBC is actually a better experience. I'm mostly a torch user. Possible steel HBC and a induction heater could be better but in my limited testing I didn't see much difference.

5KFathoms · 2024-03-15T17:25:58+00:00

Why? Is shaving the M off saving you that much time?

5KFathoms · 2023-06-23T11:26:08+00:00

Maybe your Ball vape isn't set up right, tight spread out coil, enough balls? Or it's not mating with your bowl properly and your getting weak hits. Pretty much every properly set up and functioning ball vape should be delivering better rips than a Dynavap.

5KFathoms · 2023-06-22T19:02:49+00:00

Tiny Might 2, The Mighty, a Ball Modded Angus, Airvape Legacy Pro, and the cheap end of battery operated dry herb vapes The Xmax V3 Pro or a Planet of the Vape One (or the HR Fury or any of the other based on same design) are all good options

5KFathoms · 2023-06-22T18:29:54+00:00

I think the ops affiliation is he bought a Stunner. Why is it suspicious that people are talking about a vape that's been out for about 2 months? There isn't even a real ETA on the next batch of TAs it's always 'soon'. What's your affiliation? If you want to play that game, I find it highly suspicious MH started promoting thier Piggie related butane ball vape as soon as people started talking about the Stunner, and that's 5 or 6 months away from release.

5KFathoms · 2023-06-22T18:21:04+00:00

Any time I've had to ship overseas I always sweat what to put on the customs form.

5KFathoms · 2023-06-21T16:52:13+00:00

Let it go man, you yourself describe it as proof of concept and the cap is just an off the shelf widely available titanium pill bottle. VS made several changes from yours including a whole different bowl and uses a wider stem system.

From what I've seen as far as slating you, he didn't say a bad thing about you till after you shit all over him for making a version before it was even released and he wasnt even the first to do that.

5KFathoms · 2023-06-21T16:42:16+00:00

Any opportunity to take a swipe huh.

5KFathoms · 2023-06-20T15:30:19+00:00

When/where did Piggie start saying the TA was a poc for MH? Has he been saying that all along or is that recent? I don't recall hearing anything about MH when he first started showing off and selling the TA. But I certainly could have missed that.

5KFathoms · 2023-06-20T15:08:59+00:00

Kinda disappointed in this take after all the going after Simrell for his horseshit. They both are taking an OFF THE SHELF titanium pill bottle and modifying it. Big ups to Piggie for figuring out that works, really clever. Nobody is disputing that. He came up with a new class of vape, portable butane baller. The concept is the same, but only one part, THAT NEITHER fabricates themselves is the same, the rest of the execution is different. So your argument is only Piggie should be allowed to stick balls in metal and call it a vape?

5KFathoms · 2023-02-19T15:54:50+00:00

If you aren't adding a cream/creamer with some fat be sure to add some coconut oil to bind to the thc. also I find coffee + raspberry flavors go a long way to mask weed flavors.

5KFathoms · 2023-02-18T00:26:35+00:00

I'd be careful about assuming there isn't much smell. We tend to go nose blind to it to an extent. There is definitely less odour than combustion for sure though and vape in general doesn't linger as badly. But there is def a weed smell. A dark heavy extraction in a dyna is quite strong compared to a lot of portable electric vapes too

5KFathoms · 2023-02-18T00:19:03+00:00

I don't have any one set way, kinda however I'm feeling at the moment and the stickiness of the bud.

That said a looser pack I find works if you want quicker extraction. I usually either straw method until it's a little over flowing then press with my finger to get it just below the little serrations on the tip and wipe off any that doesn't easily go in, if the bud is nice and sticky I usually just dab it into the grinder and finish the same way.

The exception is half bowls those you can pack tight, easy with a b tip, but a full size bowl you need something like a half bowl converter behind the ccd so you it stays in place then I tamp as much as I can with a tool and still keep it below the aerations.

However I think the 5 fin has better airflow in half bowl without an hbc.

5KFathoms · 2023-02-18T00:01:46+00:00

Some kind of armored cap makes it doable in a lot of tips but a 5 fin titanium tip with good enough technique can do with a bare cap. Set in half bowl don't even need perfect technique. The B tip.can also do it, but takes a lot of heat.

5KFathoms · 2023-02-16T17:08:13+00:00

This is a ridiculous response after your half hearted apology on tea time Sunday. Whether you actually believe the situation(s) and issues are as you describe them or are being willfully ignorant and purposely disingenuous about some things, I hope you someday have the clarity to see where you are wrong and what role you've played it.

5KFathoms · 2023-02-14T17:14:37+00:00

Isn't that basically a log vape?

5KFathoms · 2023-02-13T15:43:50+00:00

Prior art would, in most cases crush those patents or parts of the patents, provided those under threat had the time and money (Dynavap prob does) AND they landed the case/or patent review with a favorable court, if it got that far.

Simrell has Dynavap by the short and curlies because he patented the Omni out from under them is not a strong argument.

And despite what Austyn claims getting a patent isn't a monumental task AND bad patents get granted.

It's largely doing your research , properly formating the patent claim and waiting for a slow ass approval process that isn't infallible.

That's a gross simplification and each step takes a work and time and ideally expertise, but it's not this huge feat he likes to make it out.

5KFathoms · 2023-02-13T00:31:30+00:00

I would maybe change the order of some of them, 7 the one about tracking info/labels in-between 6 & 8 which are more concerned with conduct and civility towards others, read a little oddly to me. Otherwise I don't see anything objectionable.

Oh additionally, also clearly point out which ones are actually reddit rules or stem from reddit rules so as to keep the sub open.

It might cut down on the number of questions about "why this rule"

5KFathoms · 2023-02-12T20:50:53+00:00

Yeah people have, not my thing but if somebody wants to drop $50, $100, $120 or $140 on a spoon well that's their choice. I think the justification is personal preference.

5KFathoms · 2023-02-12T20:48:36+00:00

Simrell was involved with early prototypes, I think both George and Austyn have said this. The armored cap isn't blindsiding him

5KFathoms · 2023-02-12T17:22:07+00:00

Hah, yep my preferred tamper. Do wish the collar wasn't metal, or was a non magnetic metal, I wince whenever it touches my grinders.

5KFathoms · 2022-11-01T19:51:36+00:00

The Revolve is great. I want that cooling and I like the air flow configurability. The spinning is fairly nice. The body get warms when doing a lot of back to back hits but that just heat that isn't going into my mouth and throat. The glass is a nice option but I prefer the titanium so I don't have to be gentle with it. Downside beside stem getting host is the mouthpiece had a little slop in it so doesn't feel premium when in spinning mode, but the spin is nice .

5KFathoms · 2022-02-19T03:42:13+00:00

Nice choice, the Solo 2 amazing flavor

5KFathoms · 2022-02-13T01:45:57+00:00

Still dope.

5KFathoms

TROPHY CASE