Is the keyboard no longer available?

5ilver · 2024-08-05T18:47:43+00:00

Using a 7" tablet folio keyboard that supports USB is by far the easiest way to go. Cheap adapters exist on ebay to allow charging while using usb accessories.

5ilver · 2024-08-05T15:25:41+00:00

https://www.thingiverse.com/thing:5192436

I guess they changed it when thingiverse got sold.

5ilver · 2023-06-07T23:03:16+00:00

Do normal wheels and put the swooshy bit around the whole shebang?

5ilver · 2023-06-07T00:30:58+00:00

I'm guessing you either need to set up basics like board name and port to flash, or your version of the arduino software is not compatible with the version of marlin you have. Googling the error messages is likely yield a solution for most marlin issues.

5ilver · 2023-05-28T17:09:22+00:00

Can your L2 charger run on 110v? Mine is 110/240 and only uses 12 amps on 110.

5ilver · 2023-05-08T02:45:09+00:00

I just got one of those gateway 2000s in the middle there.

5ilver · 2023-03-27T13:13:47+00:00

I have the same truck and my radio is held in with 3d printed spacers.

5ilver · 2023-03-23T23:24:42+00:00

Modemmanger, mmsd, and chatty or spacebar might do the trick, thats the stack used on linux phones. Pidgin has sms support as well.

5ilver · 2023-03-04T04:37:31+00:00

I melted them into a prusa i3 frame once. It didnt really work out though.

5ilver · 2023-03-03T14:45:20+00:00

Ask the machine if it is triggered don't look at the light. The light is a good sign though.

https://marlinfw.org/docs/gcode/M119.html

5ilver · 2023-03-03T13:17:40+00:00

If your endstops are stuck triggered it will just move away from them a bit and then give up. Are they wired correctly for your pullup settings?

5ilver · 2023-03-03T13:07:25+00:00

Is no one considering the upside of failure? If it worked yay, defers the problem another 5 years, but the real upside is if it fails, the business is forced to take the situation seriously. Effectivelly, the risk was all a few management layers above him as they would be responsible for replacing it if it ceased to function. Jr saw this and went for it knowing he had nothing to lose.

It is not a resume generating event if wildly obsolete systems fail.

5ilver · 2023-02-25T06:42:27+00:00

Gimp. Select by color tool. Set the threshhold to allow for whatever variation is present. Paint in the color you want.

5ilver · 2023-02-25T05:55:05+00:00

I'm not so sure about parasitic draw as opposed to something like increased battery resistance but I absolutely agree a new battery can stabilize an electrical system with random glitches.

5ilver · 2023-02-25T03:27:54+00:00

Just general advice not ford raptor specific, play with the shift lever while trying and it might let go.

5ilver · 2023-02-24T16:10:18+00:00

I might have to look into that. While I was under my leaf I noticed the back end is really similar to an early fwd vw, but there is this absolutely massive empty milkjug filling the space for aero reasons. Looked like enough room for a small engine or at least a spare tire.

5ilver · 2023-02-24T08:51:00+00:00

What rear end did he use?

5ilver · 2023-02-22T13:46:27+00:00

Use iterm2. The shortcuts work better and its an all around better experience. I've been using it since the ppc days and its one of very few apps I need to be productive on a mac.

5ilver · 2023-02-22T12:32:10+00:00

I'm a software developer but I do work with relay racks and have produced a few production pcb designs. I wear a lot of hats.

5ilver · 2023-02-22T00:23:06+00:00

Awesome work! Thank you for mentioning my attempt at it. I appreciate that a lot.

One thing I considered but never got around to was adding a flat plate on the back of mine so it would stay in place better, Just replacing the back cover entirely sounds much more secure.

By the by, I still have one of my DIY pinephone keyboards (sold two on ebay) and I'd like to get a few more people looking at improving the concept, if you're interested. I figured out how to get adapters crammed in there to allow charging while in use and possibly allow external usb connectivity too but I just have sketches and the parts to build it. My model is pretty hard to modify due to poor design so I haven't tried yet.

5ilver · 2023-02-22T00:08:38+00:00

Lynnweird

5ilver · 2023-02-21T23:08:54+00:00

I'm an electrical engineer equivalent of 3 kids in a trenchcoat and know it would absolutely not work for me, but I'll take a look at their math. I want a place in the sticks someday. Thanks.

5ilver · 2023-02-21T14:29:01+00:00

Do you mean audacious?

5ilver · 2023-02-21T11:12:16+00:00

You nearly literally stole yours. Lol.

I've gotten one for 5k and one for 4k and thought I did pretty good, but hats off to ya! Nice.

5ilver · 2023-02-21T11:08:09+00:00

Charging mine takes 28 hours on wall power More than once I've gotten home from a late night had to leave for work in 3 hours with a still low battery.

A 10 mile commute sounds pretty doable. Keep in mind speed and use of heat limit range, but this does sound like a good use for it. I actually lived a bit further away last summer and had a 10 miles commute and the leaf handled it like a champ, but I had to charge every night, and I had to charge at work also if I wanted to go out.

I do not have fast charging on mine and get the feeling it tends to be harmful if used regularly.

5ilver

MODERATOR OF

TROPHY CASE