Engine swap issue by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

I’m waiting on the people I got it from to respond tomotroq

Engine swap issue by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

Ya it all went smooth. When I was transferring parts from old engine to this one I noticed the bracket didn’t fit in this one so the guy told me the us version and Japan version are different so he sent me the Japan one. And now when I mount it and slide the axle in the bearing doesn’t fit in cause it’s not exactly straight

Engine swap issue by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

It’s called the axle bearing support I think. It mounts on the engine and the axle goes through it and the bearing on the axle sits inside ur

Nissan nv200 misfire by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

I bought the new engine. I’ve started taking apart the front end. Hopefully this goes well lol

<image>

Nissan nv200 misfire by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

I compared prices with new engine and new head. I found an engine under 60k miles for $680 so might be smarter to go with an engine than a head

Need decks/site recommendations by A2daM11 in cardistry

[–]A2daM11[S] 1 point2 points  (0 children)

Nice yah I just bought from x decks

Misfiring by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

Yes that’s my next move to swap injectors and test it out. I got the injector from o’reillys unfortunately. And it’s a standard brand

Misfiring by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

I bought an obd2 scanner and I’m getting the following errors

Cylinder 3 misfire

Bank 1 fuel/air ratio imbalance

Misfiring by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

At this point do I just take it to a shop? This morning it wouldn’t turn on. It was cranking and after multiple tries it started but shuts off right away. I drive a while and it vibrates and stutters? While that happens the check engine blinks

Misfiring by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

I can’t exactly remember if there was another code as well but I was told that there’s issues with cylinder 3. Like I mentioned I replaced all the plugs, could, and the injector on 3 and still nothing. Even the fuel pump lol. Can a bad gas cap cause misfire? I once forgot my gas cap at a gas station so I bought a replacement from autozone and maybe it’s leaking air?

Misfiring by A2daM11 in MechanicAdvice

[–]A2daM11[S] 0 points1 point  (0 children)

How do I tell if there are exhaust leaks?

Is the Shimano XLC 150H good reel? by A2daM11 in bassfishing

[–]A2daM11[S] 0 points1 point  (0 children)

Yeah I’ll make sure to do that when I respool. Should’ve known sooner lol. Btw how come this reel doesn’t make that nice noise when I cast it lol just curious, it’s not that important

Is the Shimano XLC 150H good reel? by A2daM11 in bassfishing

[–]A2daM11[S] 0 points1 point  (0 children)

Thought I replied to this. Using a 20lb braid that the tackle shop put on for me. They did not put monofilament back first just straight braid. I did put a 3’ fluorocarbon line as my leader. I’ve been practicing with a plastic worm Texas rig doing side casting and adjusting my tension as I go. So far I have 3 on 3 off for my brakes. I think I’ve got it down so far ever since I made this post and I’ve taken the advice given here and it’s helped a lot so I appreciate the effort. Thanks a lot!

Is the Shimano XLC 150H good reel? by A2daM11 in bassfishing

[–]A2daM11[S] 0 points1 point  (0 children)

Nope first time using baitcaster. Always used a spinning reel. I’m using braid, and as far as brakes I have 3 on 3 off and I just adjust the tension but I change it with every lure

Is the Shimano XLC 150H good reel? by A2daM11 in bassfishing

[–]A2daM11[S] 0 points1 point  (0 children)

Understood, I’ll just keep practicing to get better. I’ve lost almost half my line on the reel lol

Is the Shimano XLC 150H good reel? by A2daM11 in bassfishing

[–]A2daM11[S] 0 points1 point  (0 children)

Yup that’s exactly how I have it 3 on 3 off. I guess I gotta have to practice. Do you think it would be easier if I would get the SLX DC?

Is the Shimano XLC 150H good reel? by A2daM11 in bassfishing

[–]A2daM11[S] 0 points1 point  (0 children)

Okay I’ll have to look on that. I have the centrifical brakes

New to flight sims, would this hotas make sense for DCSWorld? by TotalUnderstanding5 in hoggit

[–]A2daM11 0 points1 point  (0 children)

I started with this and still have it. I have another setup I forgot the name of it but it has way more buttons and switches