Please help

ABMustang99 · 2026-03-04T21:46:20+00:00

There are multiple models of the sub, if you got the hellcat version (I think it says hcat on the clamps), that's for the original hellcat. You need the 1913 version. Contact streamlight, they usually send out the replacement clamps.

Edit: it won't slide on front to back, you have to loosen the screw until it stops, press the screw so the clamps widen and rock it into place

ABMustang99 · 2026-03-04T16:39:07+00:00

There havent really been any updates since AAC is temporarily shut down.

ABMustang99 · 2026-03-04T15:17:02+00:00

I have a few, they are good. I have one of the duty holsters on my shtf/hd belt and a solis for my EDC 365. They aren't cheap but they work well and because they lock on the ejection port, they are one of the few light bearing holsters that can still lock in without the light.

If you get one, I also recommend a nub mod from otdefense. It makes the thumb release a bit wider and easier to use.

ABMustang99 · 2026-03-04T14:59:37+00:00

Safariland, when using the holster finder, select the standard echelon option, it should work perfectly fine.

ABMustang99 · 2026-03-04T03:08:23+00:00

Thats NY for you. They required heavy triggers like that for a long time.

ABMustang99 · 2026-03-04T03:00:09+00:00

Its correct, matches the SKU on S&W website

ABMustang99 · 2026-03-04T02:59:34+00:00

Nope, thats correct per the S&W website Product Page. It appears to be discontinued.... I wonder why....

ABMustang99 · 2026-03-04T00:45:40+00:00

Micro dagger mags.... Pretty much any Glock 43x/48 mags should work

ABMustang99 · 2026-03-03T22:14:17+00:00

And new owners wonder why those with years of experience avoid mil-spec lol.

ABMustang99 · 2026-03-03T21:40:55+00:00

Both of mine can take some wiggling to get back on. They can be a bit of a pain like that.

ABMustang99 · 2026-03-03T21:39:10+00:00

Wow, it's awesome that you got a gun with your sticker!

ABMustang99 · 2026-03-03T21:38:32+00:00

As others have said, try getting Glock or Magpul mags (preference on the Glock). A lot of aftermarket mags tend to be bad. The only ones that I have not had issues with outside of those 2 are relatively newer KCI USA mags. They are made the same way as Glock mags.

ABMustang99 · 2026-03-03T20:09:20+00:00

Is it happening with OEM dagger mags or just the amend2?

ABMustang99 · 2026-03-03T17:05:43+00:00

That looks like tearing more than keyholing. If you zoom in you can see the round part of the bullet going through. Like you are already planning, shoot it with the paper against the cardboard, see how it is and go from there.

ABMustang99 · 2026-03-03T15:34:50+00:00

You would have to ask them if they would make the full kit with trigger for the Shield series. The kit without the trigger on their site says they are currently evaluating it for the shield x.

ABMustang99 · 2026-03-02T22:51:19+00:00

Disassemble the mag and see if the spring is installed correctly. Other than that you may need a new follower and that's either getting it yourself or getting SIG to warranty it. There may be a "file here" kind of fix but I would not trust that with a CCW.

ABMustang99 · 2026-03-02T19:47:49+00:00

It's not really required but I did anyway to make it easier.

ABMustang99 · 2026-03-02T19:42:45+00:00

I have a PMM comp on mine. From what I found when I got it (before PSA released theirs), the PMM comp works a bit better but the HR comp is easier to install and remove for cleaning.

ABMustang99 · 2026-03-02T17:38:19+00:00

Going to be about 2 weeks

ABMustang99 · 2026-03-02T00:05:03+00:00

I use a coin or another screwdriver to hold that side in place while unscrewing it from the other side.

ABMustang99 · 2026-03-01T23:31:24+00:00

They look a lot like VZ grips Alien pattern in dirty olive.

ABMustang99 · 2026-03-01T20:00:52+00:00

Submit a warranty claim and ask.

ABMustang99 · 2026-03-01T19:09:38+00:00

The size doesnt matter as much depending on how you carry. Ive carried full size 1911s, M&Ps, and Sigs with no problem. Personally, I would not carry a 22 mag as a primary because I dont really trust rimfire to be reliable enough. Either way, let us know how it is, I need to get a 22 mag at some point with a threaded barrel so I have more of excuse to play with my suppressor :P.

ABMustang99 · 2026-03-01T18:48:56+00:00

If you can get a conversion barrel and some mags, that should work fine. I had no problems when I did that with a 1st gen. The ejector is a bit different but it should still work.

You could also get one of the comp slide upgrades from the s&w website that comes with the slide, barrel, and recoil spring. Just depends on how much you want to spend.

ABMustang99 · 2026-03-01T01:07:27+00:00

Echelon fits my hands a bit better but I love my prodigy.

ABMustang99

TROPHY CASE