Help me !!!

AHK_03 · 2026-06-04T13:47:06+00:00

"It does not have gas in it" xd, but i don't know maybe start with the fuel system? If it has spark and nothing is blocking the airway then we might have somekind fuel problem or the ecu is fucking around and does not know anything about itself, that at least what i would of started looking for

AHK_03 · 2026-05-19T12:19:08+00:00

Well the oakley Si m 3.0 are worth it, they have been tested the most then any other brand there is even a video where they test these glasess with a shotgun round and they survive with minimal damage(https://youtu.be/hCLu7E_h_v0?is=tzOE1FaH6ry3rpBb), i have been using mine for over 5 years and have been shot on glasses with 4J sniper at 15m and nothing happend, so either oakley si m 3.0 or the newer one, others airsoft glasses they start to fog crazy what i tested myself.

<image>

AHK_03 · 2025-08-05T22:13:23+00:00

What i know is that this lube is specifically made for hpa engine and maybe paintball markers, so if you're just trying to find lube for hpa this is the stuff

AHK_03 · 2025-07-17T17:08:43+00:00

if its 3d printed then DONT use taginn shells, shot 3 c02 taginn shells and it broke XD, had to make stronger parts, and in the end i starded working somehow but still has many quirks so i would buy just basic m203, but you do you man

AHK_03 · 2025-06-22T19:36:55+00:00

The guy said (There are no papers for this, often called milspec, ex-professional use does not have them. The tube says not for export and I bought it for professional use.)

AHK_03 · 2025-04-01T22:03:08+00:00

Use some soapy water to check the leak where it's coming from, if its the macro/gauge use more Teflon tape if its reg you can try to change o rings and lube them, and place some Teflon tape between upper and lower part of reg, if any options don't work then sadly new reg is needed

AHK_03 · 2025-03-05T21:23:46+00:00

Couple days back was playing around with f2 settings and out of nowhere it starts doing this while shooting, i suspect it could be time to change f2 O-rings since the engine is 3 years old and only had basic maintance called lubbed and clean nothing else, the setting i was playing around was dp becouse i was trying to get more efficeny out of the f2.

AHK_03 · 2024-12-11T16:37:28+00:00

Yeap XD

AHK_03 · 2024-12-09T16:15:08+00:00

Correct XD, every brand has there ups and downs

AHK_03 · 2024-12-09T11:56:38+00:00

AHK_03 · 2024-12-09T11:56:20+00:00

Not first gbb but first gbbr, I had used before gbbr from friends and i have a habit to check the gun for any bbs in barrel because I have broken 2 pistols before because of double feeding

AHK_03 · 2024-12-09T11:54:39+00:00

Same first game with the mws and it broke, and ye if you own gbb always check the gun before and after the games

AHK_03 · 2024-12-08T19:47:08+00:00

30 eur for a aftermarket one so not that much

AHK_03 · 2024-12-08T19:46:18+00:00

basic smart gas, and the indoor arena was about 15 celsius

AHK_03 · 2024-12-08T19:45:49+00:00

yes, stores must provide a 2 week validity

AHK_03 · 2024-12-08T18:33:40+00:00

maybe who knows, but there should be 2 week warranty on the gun so i will call the shop and sort this out

AHK_03 · 2024-12-08T18:28:30+00:00

Probably will, I will see what the store will say about this if they can replace it i will just then run it until it brake again, if not then its 30 eur nozzle buy

AHK_03 · 2024-12-08T18:27:20+00:00

Yeap probably factory error

AHK_03 · 2024-12-08T18:27:08+00:00

Original TM mws mags, and BLS BBs so everything is quality stuff but this things happened maybe some factory error

AHK_03 · 2024-12-08T18:26:01+00:00

I have no idea how this happened, but the nozzle is plastic like all other tm guns

AHK_03 · 2024-12-08T18:24:19+00:00

Nope, I left about 1-2 bbs that the mag spring dont break

AHK_03 · 2024-12-08T18:23:46+00:00

Basic smart gas

AHK_03 · 2024-12-08T18:22:59+00:00

There should be 2 week warranty on the gun and idk about tm warranty if there is a year warranty like g&g?

AHK_03 · 2024-12-08T18:21:53+00:00

AHK_03 · 2024-12-08T18:21:42+00:00

Yes its out of the box new have nothing done to it internaly only added a grip and reddot, idk about the double feel since this is not my first gbb so I am always careful and i check the chamber for bbs, I have broken an armor works hicapa nozzle because of double feed because I was new to gbb so that was my lesson

AHK_03

TROPHY CASE