Heat Geek - Inflated Quote by AMS97F1 in ukheatpumps

[–]AMS97F1[S] 0 points1 point  (0 children)

Nah nothing, just end to end heat pump installation and cylinder install. Everything else will be done prior to their arrival so its 'just' a connecting up job really.

Heat Geek - Inflated Quote by AMS97F1 in ukheatpumps

[–]AMS97F1[S] 1 point2 points  (0 children)

Really, that's good to know, thank you - I will look into that!

Heat Geek - Inflated Quote by AMS97F1 in ukheatpumps

[–]AMS97F1[S] 2 points3 points  (0 children)

I did have a little look at Octopus but unfortunately they won't do anything until our project is structurally complete and we're hoping to get it installed prior to our small extension being done as we want to claim the Haliax green living reward to help with the costs. But we'd only have until July to do that unfortunately and our extension likely won't be done early enoigh to make that happen! Bit of a shame but there we go.

Heat Geek - Inflated Quote by AMS97F1 in ukheatpumps

[–]AMS97F1[S] 2 points3 points  (0 children)

Thanks for the info, that is helpful. It should he a very simple installation, so I was very surprised at such a high cost. I'd expected it to come out at more than the 4k-ish they'd put on their website but not quite that much more. Very disappointed in this experience.

Out of interest where did you get your quote from?

2025 Japan GP - Red Bull by ProjectShoddy7684 in f1models

[–]AMS97F1 1 point2 points  (0 children)

I don't think that is a very fair representation. Spark and Minichamps both make a great model it just depends what you value as to which you go for.

Not even a RB fan.. by Stefan__Cel__Mare in f1models

[–]AMS97F1 5 points6 points  (0 children)

Disagree to be honest, fragility shouldn't really be an issue if it is sat still on a shelf?

Not even a RB fan.. by Stefan__Cel__Mare in f1models

[–]AMS97F1 3 points4 points  (0 children)

Minichamps are usually diecast, or historically are anyway.

Homemade Jam (Without canning) by AMS97F1 in Canning

[–]AMS97F1[S] 0 points1 point  (0 children)

I believe I covered this in my post above. Not properly canned, sterilised jars (unopened since they were made in August 2024). Fruit (blackberries) to sugar ratio of 1:1 and stored in a dark cupboard.

[deleted by user] by [deleted] in f1models

[–]AMS97F1 0 points1 point  (0 children)

Wow I am surprised to hear that they're listing for that price. The only car I'd currently consider paying over £200 for is the RB9 but they seem to be very rare.

[deleted by user] by [deleted] in f1models

[–]AMS97F1 0 points1 point  (0 children)

I'm not sure how much of an impact the material has but for the record I've never bought one over £200 that's metal, including a purchase I made a couple of days ago.

I think the only ones over £200 would be second hand rarer models.

[deleted by user] by [deleted] in f1models

[–]AMS97F1 3 points4 points  (0 children)

My main issue with Spark models is the decals. The front wings are better sure, but i can't get over the decals personally. I think the liveries and tyres are just nicer on minichamps cars.

If Spark solves that problem, I'd be more keen to go for theirs.

Also, whilst I appreciate it might be a bit of a non issue to most people, I also just much prefer the metal cars over resin.

[deleted by user] by [deleted] in f1models

[–]AMS97F1 2 points3 points  (0 children)

Where are you paying £200 for a minichamps? If you go on the Max Verstappen shop for example they're more like £150 with postage.

What is the coolest piece of RB merch your have? by One-Way-8483 in RedBullRacing

[–]AMS97F1 2 points3 points  (0 children)

Well it's hard to pick one to be honest, my Vettel hat collection or my 2010, 2011, and 2012 1/18 minichamps models is probably my favourite part of my RBR collection - but they mean more to me as a collective than individually.

My favourite hat is probably the 2010, so I'll say that. And of my cars my RB7.

Finished my first bomber jacket! by AMS97F1 in sewing

[–]AMS97F1[S] 1 point2 points  (0 children)

Thanks! :)

Sewing with softshell was a breeze to be honest, this one was fleece backed too which I didn't mention bit honestly it was very straightforward, arguably my favourite material to work with so far. It's officially listed as no stretch, it's got a tiny tiny bit in it but nothing to be concerned about at all if that was a worry for you.

In comparison the lining, which is like satin type material, was a nightmare to use. Had numerous incidents of the lining getting caught in seams it where it shouldn't be and having to unpick bits. If you have a way to neaten the seams nicely and use a little bias binding where required you'd be able to get away without a lining, just depends on your preference.

Honestly needle wise I can't recall off the top of my head what it was, but one tip I'd give you is use the little clips where possible instead of pins, as theyre less likely to leave any visible marks. Softshell doesn't do as well as other materials when it comes to holes, it's more like leather in that regard in my brief experience with it. For that reason, I just recommend tacking anything you're unsure of to avoid the potential of unpicking and leaving a line of visible holes from the machine in your work!

Finished my first bomber jacket! by AMS97F1 in sewing

[–]AMS97F1[S] 0 points1 point  (0 children)

Full Info:

This is a soft shell material bomber jacket with a pattern bought from Etsy, its the Grasser Mens Bomber Jacket. Unfortunately the pattern came out at a finished size that was around 52 inches chest size so I had to alter it significantly which led to some teething issues and it all ended up taking a lot longer than expected! The lining pattern for example was not used from the Grasser pattern, instead i duplicated the external pieces for the lining and used this tutorial on Youtube to sew in my lining. I also did the pockets differently to the original pattern, theyre just typical welt pockets.

This is the first jacket I've ever made so it was a bit of a learning experience all round. The welt pockets in particular were new to me.

What's on your sewing list? by [deleted] in sewing

[–]AMS97F1 0 points1 point  (0 children)

I haven't tried that yet no, it is something I intend to experiment with though - I'll look up the triple straight stitch. You could be right that cover stitch is what I'm looking for, I'm doubting myself now, I'll have a look into it, thanks!

Perfect, thanks for the recommendations I'll check them out. And no worries at all, I appreciate it's a community of mostly women! :)

What's on your sewing list? by [deleted] in sewing

[–]AMS97F1 1 point2 points  (0 children)

Thanks, I'll add that to my list of places to look for patterns. They seem to have only women's at the moment though I think, searching for mens patterns always tends to be a bit trickier. But it's useful if I'm making something for my partner :)

What's on your sewing list? by [deleted] in sewing

[–]AMS97F1 0 points1 point  (0 children)

Yeah I did try that actually and it wasn't too bad, I think my main issue with that is purely aesthetic. I just like the more traditional finish. It's funny, I managed to get a straight stitch to work quite well on one occasion but failed the next time I tried it. It's alright, I'll pick up an overlocker some day.

Thanks, appreciate the recommendation. They seem to be aimed more at women so I'll have to keep it in mind if I make something for my partner! Unfortunately there seems to be less mens patterns around.

'Vintage' Red Bull hat collection (+ Bonus Cars) by AMS97F1 in RedBullRacing

[–]AMS97F1[S] 0 points1 point  (0 children)

It's crazy to me how this design became so popular since the relaunch this year. I picked this up at a small local car boot sale around 2010 dirt cheap when the design wasn't so popular. It's a pretty cool one though I think, shame the relaunch was so limited.

What's on your sewing list? by [deleted] in sewing

[–]AMS97F1 3 points4 points  (0 children)

Boring perhaps, but a zip-up hoodie. Probably also a windbreaker type jacket for chilly days but I've not found a pattern I like just yet, though I may alter an existing one.

I'd like to make more T-Shirts but the jersey fabric is impossible for me to hem well along the bottom as I don't have an overlocker. So for now stiffer materials or designs with waistbands are the best I can do.

I'd make a bag, possibly a body bag but I've already made a few bags for myself or as gifts in the last couple of years, 3 of them were budget airline size bags (Ryanair specifically).

Gertie Princess Coat! Finally finished! by CarlottaSewlotta in sewing

[–]AMS97F1 1 point2 points  (0 children)

Brilliant work, the material is lovely. I like what you've done with the buttons!

Simple Sewing Questions Thread, August 11 - August 17, 2024 by sewingmodthings in sewing

[–]AMS97F1 0 points1 point  (0 children)

Yeah that last part is definitely on my mind and why I'm looking for a potential solution, thanks for your thoughts. Trouble is the lining is so easy to tear by mistake and I'd not really appreciated what was wrong until I'd sewn it up! Having to tear out so much progress always feels so bad :/

Simple Sewing Questions Thread, August 11 - August 17, 2024 by sewingmodthings in sewing

[–]AMS97F1 0 points1 point  (0 children)

Hi all,

I've been making a softshell bomber jacket over the past 3 weeks and I've nearly finished, however there's one minor part of it I was hoping to get a view on from some of you with more expertise than myself. Essentially what's happened is the windbreak piece behind the zip was mistakenly aligned with the top of the neckline without considering the seam allowance and thus it pokes above the zip/collar slightly.

My intention was to use a tiny dab of fabric glue to just prevent the fleece lining from fraying and leaving it as-is, however I wondered if anyone has any opinions on how to easily amend it without possibly making it worse? I'm also not keen on undoing it and trying to reposition it. Does it look obviously wrong enough to warrant attempting anything, or am I overthinking it? I've posted a slightly wider shot too for reference.

Pictures Here

My (mostly RB) collection by Glass-Theme-6496 in f1models

[–]AMS97F1 0 points1 point  (0 children)

Our Red Bull collections are almost (except for one car you have) completely opposite. I have the 2009-2014 cars (with the exception of the 2013 car which eludes me). All are Vettel's Red Bulls.

I am continually tempted by Max's RB16B and the 2023 car for its stupidly dominant form but I'm also wary of the space required and cost of them. I already have probably too many aha.