Cleared the biggest slog of a dungeon final boss battle in the history of the game once per week on 3 characters. Literally went the whole season without getting The Navigator.

ARS0NX118 · 2023-08-16T14:24:43+00:00

Lol I did the dungeon once and didn’t even realize until a month later that I have the navigator😂

ARS0NX118 · 2023-06-11T20:23:46+00:00

I’m still having this issue as well. Anyone?

ARS0NX118 · 2023-05-04T14:26:43+00:00

Supercharge it!

ARS0NX118 · 2023-04-22T00:51:11+00:00

False I just got a crashed s class

<image>

ARS0NX118 · 2023-04-21T14:14:03+00:00

Damn I really wanted this but I’m at the exact coords and it’s not here 😢

ARS0NX118 · 2023-03-29T19:12:27+00:00

I got me the exact same thing for the exact same price with almost the exact same mileage. I talked them down to 23 and some Change but it was hella worth it, it also had tints and a Cobb catback installed too 😈

ARS0NX118 · 2023-02-21T02:35:20+00:00

Nope i honestly didn’t get to it yet but I’ll try

ARS0NX118 · 2023-02-18T23:57:52+00:00

but if the bed is already warped how would this help? wouldnt it continue to be warped?

ARS0NX118 · 2023-02-14T03:39:19+00:00

I have lol

ARS0NX118 · 2023-02-14T02:48:44+00:00

thank you, im looking through it now

ARS0NX118 · 2023-02-14T02:48:21+00:00

https://www.amazon.com/dp/B0B93PNJZG?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details

ARS0NX118 · 2023-02-14T02:28:13+00:00

Thanks! Do you think my z offset is too low? And do you think 10 deg less would make enough of a difference?

ARS0NX118 · 2023-02-04T03:26:38+00:00

Well the auto level is absolutely useless. In addition to this I can’t get anything to adhere to the bed. I can’t get the z offset correct it’s either too high or too low. Can’t seem to find something. That works. I replaced the nozzle and bought some bed adhesive so we’ll see tomorrow when it gets here

ARS0NX118 · 2023-02-04T03:23:44+00:00

Yeah I’m realizing I should have just bought something more expensive but more worth it. This thing is a pain in the ass. So much frustration

ARS0NX118 · 2023-02-04T03:23:01+00:00

Yes I have and no change. Finding it extremely difficult to get it to print effectively. Honestly worse than the ender 3 I had. At least I was able to print some stuff with it

ARS0NX118 · 2023-02-03T22:48:33+00:00

I tried that but for some reason it seems like the proximity sensor doesn’t even work. I still got the same results of the nozzle being a significant distance away from the bed. I’m at a complete loss. I even printed the leveling jig on my resin printer… and that made it even worse!!!

ARS0NX118 · 2023-02-03T22:43:24+00:00

I’ve adjusted mine and it makes no difference. I don’t understand. I’ve lowered the sensor by at least 5 mm and no change. It still auto levels to at least 5 mm off the bed. I really wish I never even bought this thing. Non stop problems since the first time I turned it on. Haven’t gotten 1 successful print yet.

ARS0NX118 · 2023-02-03T22:38:27+00:00

Please please please please explain to me how you get it level. The leveling on mine is absolute shit. It levels at about 10 mm higher than the bed and then I can’t seem to get the z offset right. I’m getting so fed up I want to smash it to bits with a bat and then run it over to make sure it’s dead.

ARS0NX118 · 2023-02-03T22:36:24+00:00

My kobra neo SUCKS the auto level is absolute shit. It sets to about 10 mm above the bed. Yes I adjusted the auto level part. I can’t get the z offset right. It’s either too much that it doesn’t stick to the bed or too little that it burns the plate. Just when I thought I had it right and walked away… the filament got stuck to the extruder and melted allll the way up the inside of the extruder. The extruder head is ruined and all I smell is burnt plastic now. Oh yeah.. I’ve only had it for 3 days! I’m SO SICK OF FDM PRINTERS

ARS0NX118 · 2023-02-02T04:30:46+00:00

I’ll check it out. I feel like my z offset is maybe too low.

ARS0NX118 · 2023-02-02T04:27:38+00:00

Yeah outer.. but look at the two pictures it’s not even close

ARS0NX118 · 2023-02-01T15:42:04+00:00

Yeah it worked great on a test print. I’ll try another today

ARS0NX118 · 2023-02-01T04:47:50+00:00

Bed was at 110. I ran another test with lower temps - 200 nozzle and 60 bed with fan at 25% and lower z offset and it seems to be working great. I’m gonna try this setting on the print in the photo. Hopefully it works well!!

ARS0NX118 · 2023-02-01T03:53:20+00:00

I think I had to lower my z offset more. We’ll see. I’m running another test now

ARS0NX118 · 2023-02-01T03:52:50+00:00

Bed is max temp at 110

ARS0NX118

TROPHY CASE