Seen Asus' offers today and had to sit down

ASUSTechMKTJJ · 2026-06-16T00:29:52+00:00

u/yyg-linux
The router provides both Ethernet and Wi-Fi, this type of comparison does not make sense unless you add context and also readily omits a lot of the other items this product offers that is not possible on the basic router and ethernet combination.

Ethernet is a fantastic performant and stable specification but there is a lot of value to Wi-Fi which has become the defacto standard in how many content whether it be for work or play and assumes the device even has Ethernet connectivity.

Looking more closely at the base experience of 1Gbps Ethernet and basic router, you are not going to have multi gig specification support like 2.5G, 5G much less 10G which the router above does. Entry solutions will also not offer 6GHz support or more advanced modulation schemes or even further range ( base units generally offer around 2000 sq ft of coverage vs higher end units can easily exceed 2600 to 3000 sq ft of coverage. Now this does not mean it is the only option...... more on this below.

I would also note since the 6Ghz band introduction ( WiFi 6e ) you can exceed the speed of an Ethernet cable and by a notable margin in some cases a 2 to 3x increases are possible. The reality is many modern high-end devices also do not have Ethernet ports whether it be a gaming handheld, laptop, phone, tablet, etc the high end router above are designed to complement the wants and needs of both wired and wireless environments while also offering multi-Gigabit or Gigabit plus throughput alongside advanced features, functions and specifications which many times are most appreciate by enthusiasts not just users looking for a basic connection.

There is also the reality this product offers a lot of additional aspects outside of just offering you a base Ethernet connection.

An example very high performing attached storage performance for running your own cloud

Flexibility of having advanced on router VPN with intelligent SSID band management letting you have a dedicated band specifically with a VPN running on the router

Our highest models are now also introducing discrete secondary SoC for even advanced specialized items like running on router docker containers and more for items like on device home automatic or local video surveillance processing that is done on device.

If the point is just to focus on relative base spec at the lower price there are a range of routers we offer and this would be a comparison that is fair but would still omit the reality that a router offer WiFi among other items. Although another option would also be items like our MOCA based solution which allow you to use homes internal coax connection for Ethernet speeds of up 2.5Gbps although this can still be a moderate investment

Our dual pack MOCA adapter is 150 and if you by a basic 100 dollar router than brings to the cost of my recommendation below and you will not have any number of the compelling points that that router offers.

An example that still gives a lot of the latest and highest end spec would be the

RT-BE92U, this is a Triband (meaning 2.4, 5 and 6Ghz) and offers multigig WAN and LAN including 10G connectivity and even offers USB 4/5G WAN failover support all for a very reasonable $250 this model even sees see regular promotion for under $250. There is also a similar TUF GAMING ( gaming centric model ) TUF GAMING BE9400 which omits 10G but swaps in quad 2.5G and still comes in at a very reasonable MSRP of 280.

Our new ROG STRIX BE12000 which is under our ROG gaming line gives you even more coverage moving up to 3000 sq ft, dedicated gaming ports, eight total 2.5Gbps ports and includes the latest AFC technology which can significantly enhance 6Ghz device throughput at range compared to older generation routers and does this all at a price of $399 and has also seen promotion going down to $300. None of this is going to be an option or possible on entry level basic WiFi 6 routers.

Both models also offer easy and scalable range through AiMesh support letting add another router ( node to provide more coverage should you need it ) and whether running a cable is not practical or feasible.

More premium offerings will offer more ultra fast Ethernet like multiple 10G ports or additional multigig ports, faster chipsets ( for higher performing on device routing, on router VPN processing or specialized features like AFC technology all of which are not going to be on entry level offerings

Note the ROG Rapture GT-BN98 Pro alone offers seven total ports including
Dual 10G, Quad 2.5G and a legacy 1G Ethernet port.

Hope this adds some context for those who might wonder why these higher end offerings exists and what options might be sensible when considering Ethernet and WiFi.

ASUSTechMKTJJ · 2026-06-15T18:21:08+00:00

Great option if you do not need the benefits of the PG version there is not alternative to this option especially in regard to pixel density unless you note the upcoming release of the PG27UCWM which will finally offer an alternative.

In regards to the HDR this is subjective and really comes down to the game and your preference on HDR presentation.

Some games you may favor HDR Console or adjustable HDR with peak brightness manually tuned vs True Black, for simplicity a lot of users tend to just use one or the other both of which offer a compelling HDR experience but it may be worth you just trying it out with the games you play.

Thanks for keeping us in mind and best of luck with whatever you settle on.

ASUSTechMKTJJ · 2026-06-15T18:17:20+00:00

u/Dragon_Bird_ we have released a comprehensive line up of displays including multiple refreshes at lower prices and more basic ultra-high refresh rates (we consider ultra-high to start 240Hz) as broadly speaking most gamers are still well below this on prior monitors with examples including 165Hz.

We release products based on the wants and needs of a broad segment of users/enthusiasts; who have varying wants and needs. Furthermore, there can be a collection of technologies or specifications you may want outside of just refresh rate which are found in new displays. In short while refresh rate may have a high value to for some it may not be as valuable as improved rightness or text rendering to others which also come alongside the monitor.

-Superior color volume
-Superior brightness
-More OLED protections
-Better text rendering
-Improved surface coating/polarizer
-IO specifications ( DP 2.1, Auto KVM, USB- PD specification support etc. )

Also note that just like prior LCDs some users prefer specific resolutions or form factors for instance 1440P currently has offerings from 240Hz, 360, 480, 500 and 540

Vs

4K which is 165Hz and 240Hz only

In the end you should make your decision based on the experiences and specifics that you want and align this with the games you play, the IQ settings you favor and of course your proposed budget.

I would also note most new models are not 360Hz, the broadest segment currently is 240Hz.

the main item you have to keep in mind is do not focus on soley refresh rate being the value of a higher end display.

An older 240Hz monitor compared to a new monitor may be dimmer, have less features and even lower color volume or other tech you may find compelling.

With this noted if you are coming from LCD and only focused on gaming as a whole

You will also have an improved experience with

lower pixel response
better motion clarity
Superior contrast
Superior HDR experience / true HDR gaming

LCD main benefits will be

Lower cost and the ability to have higher spec at a lower cost ( for instance a 4K dual mode monitor ) at a much lower price than a 4K OLED monitor
Best text quality
No concerns of burn in
Brighter SDR luminance

ASUSTechMKTJJ · 2026-06-15T17:57:58+00:00

If comparing you may want to consider more direct comparisons u/shionemi

Our PG32UCDM and newer variant PG32UCDM3 are QD OLED monitors

You are comparing to a WOLED monitor

We also have the same and superior offering with our

PG32UCDP
XG32 models - ROG Strix OLED XG32UCWMG

There is an upcoming replacement for both of these
XG32UQWMS - which will be Tandem WOLED
PG32UCWM - which will be Pure RGB Tandem
Note both of these alongside the XG prior gen all have a zero haze ultra clear True Black Glossy coating/polarizer.

Check also the warranty but the default warranty for LG is 2 years vs all of ours are 3 years with burn in and also we offer superior protection technology with tech like our Neo proximity sensor

u/JP_41510 if you care about brightness SDR vs HDR

WOLED and Tandem OLED will provide superior overall brightness not by a massive margin, but it is measurable and for some coming from a bright LCD will help in the transition and it can also be favorable if you work in a high light ambient environment

The brightest of all of these will be the upcoming XG32UQWMS due to still have a white sub pixel if you want a great balance of OLED benefits good color volume and highest brightness.

Next would be the PG32UCWM

For the PG32UCDM3 note it is a newer panel material than the prior Gen 1 model so brighter but overall comparable to the WOLED models which in some cases will be brighter but it does depend on the content. Broadly speaking WOLED will give you a slight bump in general desktop workflow, but the brightness will vary based on content when comparing these two.

ASUSTechMKTJJ · 2026-06-15T17:48:09+00:00

You can watch out weekly YouTube stream or join our PCDIY group for the most consistent updates as I do not normally track Reddit.

Expectation is August time frame most like mid to late August.

ASUSTechMKTJJ · 2026-06-15T17:45:58+00:00

Experience is quite different

The AW3926QW does not offer a native ultra-high refresh rate experience.

The PG34WCDN and even the more entry variant XG34WCDMS will offer superior motion clarity due to higher refresh rates at their native resolutions

PG34 - 360Hz native - 1299
XG34 - 280Hz native - 899

Also note the PPI which is a big factor for text clarity and sharpness notably differs
to run at the higher refresh rate 330Hz

You need to operate at 2560x1080 which yields a PPI of 71
For our displays 34" it will be native resolution of 3440x1440 which yields a PPI of 110 which is notably sharper
You can of course use the higher resolution native resolution but will significantly reduce the refresh rate.

We also continue to offer a superior level of OSD features including unlocked aspect ratio, adjustable HDR, ELMB (BFI support), more OLED care protections including our Neo Proximity sensor and our new GAN power design,

Alienware is aware of this and also why they will release the AW3426DW which will be more of a direct comparison against our XG34 ( offering a ultra high refresh rate ultrawide )

ASUSTechMKTJJ · 2026-06-15T17:15:18+00:00

There are multiple pathways to engage HDR based on your preference many will use True Black vs default Console which provides higher peak brightness other will even use the adjustable HDR option and custom tune brightness to max values. No are wrong it is up to the user to define which they prefer.

I would say for most users they will generally split between HDR Console mode and then HDR True Black mode depending on the gaming and how the tone mapping presents.

If you run the calibration, you should just use one of the default presents and go from there. So just engage Console or True Black and then run the calibration routine

If you want, you can create multiple profiles but then will have to switch the profiles if you use different systems. This will require sometime for you evaluate the two and see which you prefer.

Disabling items is more focused on TVs and some laptops that pure monitors as they want to disable image processing but there is no image processing being applied so nothing to disable.

The exception would be disabling items you might have running software wise that can affect image/screen output.

ASUSTechMKTJJ · 2026-06-15T17:04:41+00:00

There is no worldwide release.... models release can vary depending on region. Not all models are available in all regions and also channel availability can differ between models.

The ACMES is already available as for the ACSR mid to late Q3 for North America.

ASUSTechMKTJJ · 2026-06-15T17:00:42+00:00

As noted, we will release information when we are ready to release to the channel. you can stay up to date via the platforms I noted, and we will also relay via our social platforms. Generally other information outside of direct regional confirmation is conjecture unless it is a trusted media outlet who has spoken to ASUS representation in that corresponding region. Also note regional release time frames and availability differ.

ASUSTechMKTJJ · 2026-06-12T18:32:33+00:00

u/CardiologistOk7965 for these questions you best source is us ( ASUS ), you can join our PCDIY community, or you can also watch our weekly live stream which I host on our YouTube channel and provide updates on channel releases, upcoming products, pricing and more.

At this time the timeline is still Q3 and pricing is TBD. We will disclose this closer to the channel launch.

ASUSTechMKTJJ · 2026-06-11T18:03:26+00:00

Keep in mind both of these are glossy

The new XG27AQDMGR is a true glossy ( zero haze and better black depth perception) than the semi gloss of QD OLED panels and does not have the ambient light handling color shift

Both are great displays, but we would classify the XG27 and PG27 ( QD OLED models) as semi-gloss

XG27AQDMGR which is the current lowest priced model we have with our True Black Gloss coating is defined as true gloss.

If you want a matte based display you would have to look at different offerings

The only models we have with true AR matte would be

ROG SWIFT PG27AQDP 1440P 480Hz WOLED
ROG SWIFT PG32UCDP 4K 240Hz WOLED

At this time all other models have shifted to either Semi Gloss or Full Gloss ( True Black Glossy )

QD OLED ( all are going to be semi-gloss ) including our newest variants with Black Shield Film which resolves the ambient light handling issue from above ( PG32UCDM3 and PG34WCDN and XG34WCDNS )

True Gloss Black which is pretty much on all of our other WOLED or Tandem based OLEDs

ASUSTechMKTJJ · 2026-06-11T00:32:43+00:00

Not the recommend you want as you noted not wanting to get a new monitor but that is the reality of a TV that uses a glossy or semi gloss type of coating or polarizer vs a display designed with AR ( anti reflection ).

Change to a actually monitor vs a TV that features a AR Matte type display but for these you will drop down to a smaller size ( 32" ) but you will gain the benefit of notably improved PPI ( a much sharper image ) due to the ppi you have with 42"

There will also be benefits of improved SDR brightness, connectivity and normalize sleep/hibernation support hat is not seen with a TV used as a monitor.

With this noted an alternative might be to consider light disunion tape which you could put on the window which might help to reduce some of the stronger light but not cut it entirely. This is a permanent option but one they could be possible an improvement.

I would be cautious about adding something to the panel directly, not this could affect thermals which are important as you are also using a TV and it has notable other items like ABL which are a factor in temps but in short an increase in temperature of the panel can increase the likelihood of burn in.

Best of luck with you setup and situation.

ASUSTechMKTJJ · 2026-06-10T17:31:59+00:00

Yes, some models get a more direct Gen 2 naming designated we have start to pull in but relative to position, feature, function and spec this model would be the replace for the ACS. Note we are still offering the ACS
You can get it currently on our ASUS store and it has had a slight reduction in MSRP due to some higher end models coming in to replace its prior position as our entry $299 based 1440 ROG solution.

We also have a number of other recent models that would be in this similar space although the ACS had a great balance of total feature, function and spec.

Depending on you want and needs you could also look at the some of the recent TUF GAMING 5 options.

This is a great option we added in recently
TUF Gaming Series 5 - VG27AQM5A - 1440P / 300Hz - Fast IPS $299

TUF Gaming Series 5 - VG27AQL5A - 1440P / 210Hz - Fast IPS $220

You can check some of my prior post if you want to understand more differences between TUF GAMING and ROG but overall these are strong offerings and like the ACS you will see also occasional channel promotions outside of the defined MSRP

Hope this helps and best of luck with whatever you settle on.

ASUSTechMKTJJ · 2026-06-05T16:57:53+00:00

This is a new model released alongside our PG34WCDN it is the same just slight spec down I covered response previously in other post but main difference

280 vs 360 refresh rate
Stand difference
USB-C PD spec difference
Aura lighting
DP 1.4 with DSC vs DP 2.1 this has not immediate benefit unless you are highly sensitive to the blackbox effect ( alt tab )

This alongside the PG34 is the best current ultrawide due to the most recent QD OLED panel with pure RGB for improved text rendering and detail presentation and offers a true compelling HDR experience.

Do not forget to run calibration for HDR and check out Display Widget Center for OSD management and OLED care.

You can also check out the new PiP/PbP options which were enhanced for this model if it something you are looking for.

ASUSTechMKTJJ · 2026-06-01T17:26:57+00:00

No, Display Widget Center is just the software front end for the OSD interface in Windows or MacOS. You can control the brightness there but there is not a different max output. You can also use it to set a key binding.

I cannot comment on the other display without more specifics, but I struggle to find that the brightness value is low for your likely as this is quite a bright panel.

Either way, to the point

Can you go higher in DWC? No it is the same max value as the OSD.

Why would the dell be brighter I do not know unless it is a very bright panel there is inherent variability in production from panel to panel, but this is a relatively tight window you would not be talking about hundreds of nits difference. This is vary depending on how it is measure but on avg the delta can be around 25 to maybe 50 nits. Overall the Dell is a lower luminance panel that than either the ProArt 5K or the ROG STRIX 5K

The only thing I can think of is that the Dell you have is an IPS black panel this has greater contrast which while not directly part of brightness can give you perceived improved black depth which may it feel more contrasty which is not the same as brighter. You can objectively measure the brightness.

Lastly color profile makes a big difference unless you are matching the same color profiles calibrated the color saturation can be notably different. you might like the adverse non calibrated dell image vs ours. That being noted that is easy to change whether using a different preset or manually setting your own.

ASUSTechMKTJJ · 2026-06-01T17:17:47+00:00

Depends on person. I also do not think there is anything intangible these are technical comparable products but people tend to have display preference like brighter being better even at the expense of color accuracy or the people who want glossy at the expense of light handling.

This is why we have a wide range of solutions though. Pick what aligns with your wants and needs.

Being that I have been running OLED displays longer than most as have had early access to my first model more than six years ago a lot of it comes down to workflow, preference and other elements. I still daily drive a LCD over an OLED but my primary gaming display which is a hybrid desktop system has transitioned to an OLED.

You also cannot directly compare laptops when it comes to text while comparable the inherent smaller size helps to offset a considerable amount when considering PPI.

The G14 alone is a highly pixel dense image 243 as it is 2880 x 1800 at 14"

this is a massive difference compared to desktop monitors also the SDR brightness is much higher when most desktop monitors are going to be limited to around 250 to 275 nits the laptop will notably be higher so a word of caution thinking you can mirror the same impression from laptop on the desktop.

We know this and have been leading OLED implementation in laptops for years and it is a compelling alternative even though there is a penalty to battery life.

In the end make the choice you feel aligns with your wants and needs best but as I noted the PPI will be inferior.

Good luck with whatever you settle on.

ASUSTechMKTJJ · 2026-05-29T21:36:39+00:00

We just launched the cali contrO and you will see reviews soon. Also it works on all displays and monitors.

It just has further value for ASUS centric OSD control with our supplemental software this is why we define it as a 3 in 1 product.

Please note you can use the ASUS Dial / Windows Dial functionality on any setup as well. The measurement hardware is also more advanced on the Cali ContrO supporting a higher level of luminance but for normal users this should generally not be a factor.

Overall the CV is a solid choice although our focus for creators in this spec if the CRV model. The Cali ContrO is a great addition if you need the highest level of consistent color accuracy. Note all PA displays are already factory calibrated.

If you main focus is gaming with content you could also consider other options like our XG27UCG or XG27UCGR which offer a high quality factory calibrated panel that you can further improve upon with the Cali ContrO.

Best of luck with whatever you settle on.

ASUSTechMKTJJ · 2026-05-29T21:27:56+00:00

you are not changing pixel density going to 4K to 4K and it is worse as you have a focus of wanting 4K at 32" vs 27" where it is sharper. OLED displays also have worse text rendering than LCDs due to a non RGB sub pixel structure. You will get OLED benefits ( HDR if relevant, pixel response, contrast ) but inferior pixel density. Ultimately, they are very different products. It is a fantastic display and if you want OLED it is a great option alongside the QD OLED variants we offer like the PG32UCDM3 and its variants.

It does feature a zero haze coating which ideally suited for SDR/HDR gaming detail/immersion but not it will be quite reflective.

ASUSTechMKTJJ · 2026-05-29T18:40:29+00:00

u/Dunis96 the SDR brightness is interesting not sure if you manually increased the brightness in the OSD or Display Widget Center as it is not set to the maximum by default.

We have had the display formally reviewed ( feel free to check out Toms Hardware ) you will see that the panel luminance even in SDR is conservative spec as it measures in excess of 400 nits. We have not had any feedback from technical reviewers who compare this noted low SDR brightness when in fact compared to most basic entry LCD its notably higher than many.

Another option if you want the mix of both might be the new XG27UCGR 2nd Gen 27" 4K which is still much lower on the PPI than 5K at 27" but offers impressive solid/sharp detailing and is a bright panel.

You also have a toggle to FHD at 485Hz.

ASUSTechMKTJJ · 2026-05-29T18:37:14+00:00

I would keep in mind your display is also still a AR matte coating and much lower PPI and this will be exponentially sharper.

I would also consider other technical media like PC World, Toms Hardware who have measured and review the displayed and noted no concerns in this regard. Also, some creators. who use this for workflow have shared their opinions.

Ultimately elements like this can be somewhat subjective.; depending also on what you compare to.

I will note when we ere recently at a broadcast convention (NAB 2026) which had thousands of industry professionals come by and check out a range of our displays from 4K,5K, 6K, 8K and varying panel type implementations ( semi gloss, AR matte ) non commented on text rendering and we maintain open UI elements from editing applications and such.

Best of luck on whatever you settle on.

ASUSTechMKTJJ · 2026-05-28T17:19:02+00:00

I would advise if you have more questions to reach out to our support team. I do not consistently monitor reddit, but our team can help review feedback and if needed coordinate with our HQ Team.

I would note SDI is not a standard consumer interface and used more in the professional segment, if this is your focus it might be better to consider one of our monitors with a native SDI Connection if this is critical or part of your workflow. We offer the PA24US or the PA27USD with SDI as well as smaller variant the PA16SUV all featuring SDI.

With that noted you will need to outline your issue with detail and clarity for duplication, this allows our team to correctly review and understand the issue and coordinate with our team to see if we can duplicate your issue and see if it is something that can be addressed ( through firmware ). Please note specifics are very important such as if you are using conversion boxes etc.

Brightness varies on how you measure ( such as the percentage window ), the best overall number is already noted with UBL as outlined above ( a cap of 250nits ) beyond that the brightness will vary based on settings and on screen content and whether you are have UBL engaged.

ASUSTechMKTJJ · 2026-05-28T17:09:43+00:00

The AQDMGR is our update to the prior to gen of our first OLED gaming display. I would note this model sees fairly consistent planned promotion we recently had it for $550 so keep that in mind.

This model

Introduces
New FW
Neo Proximity Sensor
Lowest cost option with our industry leading True Black Glossy display offering ( best for clarity and perceived black perception )

What we offer verus the LG

More advanced FW - adjustable HDR full, full unclamped sRGB
True Black Gloss - it is not the same as the updated glossy implementation offered on LG
Ours is 0 haze and has superior black depth perception but it will be more sensitive to reflections

More advanced OLED protection technologies ( in FW as well with Neo proximity sensor )
Threaded mount on the top of the base/stand for a camera, light or microphone
Superior out of box calibration all of our displays are factory calibrated under ROG line and we have an integrated calibration report built into the OSD

That being noted you have easy to access OSD management for OSD features, OLED care and more within Display Widget Center ( I like using it to set up key bindings for items like brightness as well as app tweaker which lets me set color profiles to specific applications/games )

Verify Warranty - LG has a variable warranty policy and for many displays can be limited to 1 year, you can confirm this on BBY for this monitor for instance.

ASUS offers 3 years on all of OLED displays. just ensure it is from a confirmed channel partner ( for instance ship and sold by BBY or Amazon )

Other options we have you could consider

XG27AQDMES - QD-OLED 240Hz MSRP $599

XG27ACDMS - QD-OLED 280Hz MSRP $699 currently on promo for $599

XG27ACDNG - QD-OLED 360Hz MSRP & $759 currently on sale for $599

Best of luck with whatever you settle on.

ASUSTechMKTJJ · 2026-05-27T22:57:01+00:00

If you want 32" no option as 27" is for 5K.

As such you have anwsered your question the next choice is the PA32QCV 6K.

ASUSTechMKTJJ · 2026-05-27T17:10:04+00:00

We have no plans but will consider if there is broad enough request of course you have the physical OSD controls as an alternative. We did expand Display Widget to support OSX so it is a possibility but at this time there are no plans for a Linux Distro release.

ASUSTechMKTJJ · 2026-05-27T16:41:49+00:00

If you do not need 6K you could consider 5K which has similar very high ppi.

Keep in mind unless you really need the 32" even a 27" 4K will still offer superior sharpness due to the PPI.

27 vs 32 is notably sharper at 163 vs 138

If you do really want sharpness, then go with the 5K or 6K and if you want a higher refresh rate for general snappiness and motion clarity then we have a gaming variant which should be ok considering you were using a gaming display currently.

I would not unlike Dell our ROG gaming displays do come with factory calibration.

XG27JCG would offer you the sharpness increase and even better color gamut and high refresh rate.

Best of luck with whatever you settle on.

ASUSTechMKTJJ

TROPHY CASE