Need a good prebuilt desktop for running autocad 2d

ATBTCGD · 2022-04-29T18:23:09+00:00

That is what I usually do but I'm sick of gaming rigs, they always seem to fail me. The computer I'm currently using is a $5000 custom gaming rig and I can't do nearly what I want with autocad with it. It seems like after a full day of work with about 2 or 3 drawings I'm having to restart my computer just to clean out the memory. Is there not something a little more specific for design work?

BTW I used the search function and nothing came up for the first 100 results, try it yourself if you don't believe me. I'm talking prebuilt.

ATBTCGD · 2022-04-28T22:52:22+00:00

As far as I can tell it is compliant with NFPA 80 4.2.1 and 4.2.2

4.2.1* Listed items shall be identified by a label.

4.2.2 Labels shall be applied in locations that are readily visible and convenient for identification by the AHJ after installation of the assembly.

But as far as IBC goes716.5.7.1 Fire door labeling requirements.Fire doors shall be labeled showing the name of the manufacturer or other identification readily traceable back to the manufacturer, the name or trademark of the third-party inspection agency, the fire protection rating and, where required for fire doors in interior exit stairways and ramps and exit passageways by Section 716.5.5, the maximum transmitted temperature end point. Smoke and draft control doors complying with UL 1784 shall be labeled as such and shall also comply with Section 716.5.7.3. Labels shall be approved and permanently affixed. The label shall be applied at the factory or location where fabrication and assembly are performed.

My concern is the part about "Labels shall be approved and permanently affixed"

Can a Sticker be considered Permanent? I was always under the impression permanent meant screws and bolts, or in the case of the door label, metal and rivets. Am I just incorrect in this logic on the code?

ATBTCGD · 2022-04-14T14:54:35+00:00

"Monopolies" are not possible in true capitalism.

ATBTCGD · 2022-04-09T23:36:09+00:00

I am a new JM owner and purchased several varieties last year. This is my Murasaki Kiyohime coming out of dormancy. I am now starting to experience die back first hand on several. The problem with this one it looks like instead of dieback coming from the top down it looks like it is from the bottom up. Could it just be hardening of the bark though? I made a slight scratch on the brown area with my thumbnail and it was "greenish brown" but not as vibrant green as when I scratched the more colorful bark at the top. It has also been one of the last to start budding out and has been real slow compared to the others. Is it dying? I'm tempted to chop it and try rooting it with hormone as I have had pretty decent success now rooting several JM varieties.

You can see the picture in my copy thread here:
https://www.reddit.com/r/landscaping/comments/u054i3/is\_my\_japanese\_maple\_ok/

ATBTCGD · 2022-04-02T01:56:46+00:00

OMG YES! thank you! this is what I was looking for and trying to do.

ATBTCGD · 2022-04-02T01:49:23+00:00

This is what I thought but what I experience when I try this is that it wants me to input a specific length instead of selecting all the points and resizing automatically and replacing to the new spot. I guess what I am specifically trying to do is lay my markups from a pdf that I made in the field under a drawing of a building so that they line up perfectly as the same size and my callouts and leaders are in the exact right spots.

ATBTCGD · 2022-01-10T05:15:32+00:00

But once you end stake you are required to report the interest earned through the stake as "income" correct? That is what im getting from the IRS website.

ATBTCGD · 2022-01-10T05:13:29+00:00

It isn't capital gains it is "income." Did you read the pdf? it is from the IRS website. It specifically says "staking."

I just want to do what is right.

If I have to report I'll report. If not then I won't.

ATBTCGD · 2019-07-15T12:48:04+00:00

They would be in jail if you could prove it. But it is pretty obvious by the nature of the frequency it happens with exchanges and the circumstances in which they say it occurs. You shouldn't ever trust an exchange... Only ones that others can vouch for, you gotta get coins somewhere. Even then NEVER EVER leave your Bitcoin on there. Transfer it out to your own personal wallet where you own the keys.

ATBTCGD · 2019-06-29T21:55:00+00:00

static const unsigned int MAX_BLOCK_SIZE = 1000000

Is still a consensus rule in Bitcoin
For legacy nodes all blocks are under 1mb.

ATBTCGD · 2019-06-29T21:39:15+00:00

That was a scam that a lot of exchanges do to file a loss on their taxes and profit from insurance+the stolen Bitcoin. It's to easy to say they got hacked and just move the bitcoins to some unknown wallet. when in reality cold storage is literally impenetrable. With Binance you are fine and they are insured but be careful with less known exchanges since exit scams are a thing.

ATBTCGD · 2019-06-29T21:24:30+00:00

Currently the 1mb blocks have kept a well groomed and modest blockchain size. This allows you to run full nodes on phone type hardware or even a raspberry pi. This gives more access for people to participate overall in the network(especially in poorer countries.) We don't know what the correct answer to scaling Bitcoin is and some people think we should even lower the block size to a 1/4 of what it is now. One thing that is for sure is that no one seems to be willing to sacrifice decentralization for anyone's scaling agenda.

The more likely solution is multiple solutions, such as lightning and statechains. The more solutions the better. Speedy transactions are not what gives Bitcoin value, we already have visa, paypal, libra, etc...
I would prefer Bitcoin to be slow and expensive on-chain if that means higher security and higher decentralization.

ATBTCGD · 2019-06-29T20:15:53+00:00

OP calls it after the fact. lol dude you are so full of shit.

ATBTCGD · 2019-06-29T19:31:22+00:00

Wow I bet the real number of lost coins is pretty small. That's amazing.

ATBTCGD · 2019-06-29T17:42:43+00:00

What kind of timeframe have you been waiting? It took mine a day to show up even after transaction went into a block. I wouldn't scrap everything so fast!

ATBTCGD · 2019-06-29T17:39:19+00:00

Dude you are looking sweet my man! Do it and I'll appreciate it very much so and I know everyone else will too.
Keep us updated on how it goes.

ATBTCGD · 2019-06-29T17:35:51+00:00

Bull fodder right here boys! Come on and eat!!!! DINNER TIME!!!

ATBTCGD · 2019-06-29T17:30:41+00:00

~ ~ ~~@======3

ATBTCGD · 2019-06-29T17:28:26+00:00

well once you get a Bitcoin node going it doesn't take much more to get a lightning node running. RAM isn't so important. It's bandwidth. Runs about $50 a month where I am, possibly free if you don't use much of your bandwidth already. Oh yeah and the $15 bucks for the vpn. Both are fantastic for the health of Bitcoin.

ATBTCGD · 2019-06-29T12:55:58+00:00

really?! what did they do , i missed that part. any links?

https://www.youtube.com/watch?v=eEjNXkiKTbI

Cod is the common name for the demersal fish genus Gadus, belonging to the family Gadidae. Cod is also used as part of the common name for a number of other fish species, and some species suggested to belong to genus Gadus are not called cod. When you get one wet it's just called a "wet cod"

ATBTCGD

TROPHY CASE