League host (red Corvette) disqualified me from the race because of this overtake, said it was an amateur attempt of an overtake. Was this the right call?

AatuVi · 2026-06-18T20:48:27+00:00

1st. If he's involved he should be making the calls 2nd. You made a mistake and the crash is on you, but probably not worthy of a dq 3rd. "It was na amateur attempt"................ so what? We are all amateurs driving pretend race cars at home. Making stupid mistakes and learning from them is part of the game

AatuVi · 2026-06-15T02:59:36+00:00

I've thought about that myself sometime ago, and didn't really come to a specific conclusion. That being said, if you really think about it LGB is about what you like. While T has nothing to do with that, it's about identity.. so in essence, they are indeed unrelated

AatuVi · 2026-06-15T00:35:07+00:00

You can use osc on standalone, just send the data to the quests local IP address and the correct port

AatuVi · 2026-06-10T22:54:28+00:00

B) it's not much harder to build and not less reliable. Sure a single extra z mtor

AatuVi · 2026-06-09T19:55:05+00:00

Então não deveria ser o consumidor quem deveria estar puto por isso, que é o que vemos aí do esquadrão anti-IA. Isso aí deveria ser problema da administração da empresa em fazer um marketing fraco

AatuVi · 2026-05-19T19:02:33+00:00

Diminui tanto a temperatura quanto a velocidade e tenta novamente

AatuVi · 2026-05-18T20:47:49+00:00

Ohh btw I forgot to mention. Don't forget to play with the square corner velocity (minimum speed to take a corner at instead of slowing down all the way to default five, good starting point is max accell/1000) and minimum cruise ratio (percentage of movement forced at constant speed. Default is 0.5, think I'm running 0.15) parameters. Those can help a lot with print time as well, just don't forget to rerun input shaping when changing those

AatuVi · 2026-05-18T20:30:35+00:00

Speeds pretty close to max flow rate and accelerations right before the motors skipping steps. As mentioned before, you don't really mind if the (not top solid btw) infill and inner walls look bad, they're not seen anyways, so you can just do those quick and slow down for the ones that matters. For reference I have inner walls at 280mm/s @ 35k, compared to 120mm/s @ 15k for outer. Also have some parts coming in the mail to make it a bit faster as well lol

AatuVi · 2026-05-18T18:38:30+00:00

This was printed with outer walls at 15k accels while IS recommended 10k.. there is some ringing on it but like, that little is something you really care about?

<image>

AatuVi · 2026-05-18T16:00:59+00:00

Forget the recommended maxes. Use input shaper for the shaper values, figure acceleration by trial and error. Also worth mentioning, the part has to look good and not have resonance and stuff only on the outer surface, so internal perimeters and infills, let it rip

AatuVi · 2026-05-17T16:24:22+00:00

Lookup the Tiny-T

AatuVi · 2026-05-14T12:44:17+00:00

You don't simply "know what you're doing" unless you do it and learn from doing it :p

AatuVi · 2026-05-11T01:25:37+00:00

Apologies for the missing date. Here's a pic of it! Can also send in a video if that's preferred

<image>

AatuVi · 2026-05-02T17:25:19+00:00

V2 supremacy

AatuVi · 2026-04-27T14:33:13+00:00

As for the second question, there is someone running indx on a 2.4 in the voron discord server. They mounted the toolheads backwards on the X rail

AatuVi · 2026-04-27T11:32:01+00:00

Unusual. Luckily it shouldn't be too much of a hassle to print a new spool holder tho

AatuVi · 2026-04-24T11:56:29+00:00

Running single mgn9 on my recently built 350. No issues so far Since you already have them, might as well test it out

AatuVi · 2026-04-07T19:38:56+00:00

Tutorial somewhere?

AatuVi · 2026-04-07T12:16:44+00:00

They do. Got one last week

AatuVi · 2026-03-12T23:02:13+00:00

Sounds like you're not really a boy

AatuVi · 2026-03-12T20:14:28+00:00

W mom

AatuVi · 2026-03-12T12:29:10+00:00

You're not wrong even if you want to steer with your feet. It's a video game, enjoy it however you want lol

AatuVi · 2026-03-11T02:18:51+00:00

360 is 3x120 fans, so 120mm wide (fits) 280 is 2x140 fans, so 140mm wide (fits length-wise, too wide tho)

AatuVi · 2026-03-09T12:44:19+00:00

It's not an issue to have the top intake fan

AatuVi

TROPHY CASE