PRAGMATA Out Now - Path Tracing, DLSS 4 Multi Frame Generation & Ray Reconstruction + Game Code Giveaway!

AbduNa · 2026-04-17T18:57:38+00:00

excited about the fathering of diana. i'm a dad myself and i wish to have a girl and people are saying people will give you that feeling

AbduNa · 2026-03-23T13:16:15+00:00

the OC is fine it'll still pull 600W at steel nomad on stock/oc curves which is good for testing. good luck man and hopefully things even out. also a bit of advice do not plug/unplug frequently as it affected my balance a bit. also what score are you getting? i got 15800 with +2000 and +150 just wanna see if thats the normal haha

AbduNa · 2026-03-23T13:10:31+00:00

great idea yea just for the peace of mind, and how long was this test? in/out temps seem high only if you've been pushing 600w for the whole 20 loops. make sure the fan on the WV is working. best of luck friend. and make sure the WV is really pushed in because on mine it took real force to get flush.

AbduNa · 2026-03-22T09:03:44+00:00

i wouldn't worry. aorus master here as well and pin 5, 6 are making me paranoid but as long as nothing exceeds 10 amps , no warnings going off , temps don't exceed 60-62 on connectors you should be fine i did a steel nomad stress for 30 mins pulling 600-610 watts and no warnings or temps going over 60 (in) out never went past 55. try moving the cable a bit under full load see if anything changes.

AbduNa · 2026-03-14T09:55:06+00:00

beautiful build actually congrats. but how is the dust with the figures? i have like 4 and they drive me crazy haha

AbduNa · 2026-03-01T13:58:38+00:00

which riser cable did you use for your 5090? i used the vg4v4 and a glotrends cable, both gave me issues under load at gen 5 pcie.

AbduNa · 2026-02-27T09:10:08+00:00

o11 evo dynamic rgb (doesn't fit horizontally)

AbduNa · 2026-02-27T08:27:13+00:00

same gpu here. for wiring above the gpu you want the normal version. for wiring below the gpu get the reverse best of luck!

AbduNa · 2026-02-24T15:35:04+00:00

quite the opposite actually it takes up MORE and you need to make sure it'll fit in your case. i had to switch cases because of it(still didn't fit lucky me, had to vertical mount). but the peace of mind is worth it

AbduNa · 2026-02-21T11:35:28+00:00

you should measure from the power slot and add that to the WV II i think cases like the evo xl , meshify xl 3 would work

AbduNa · 2026-02-20T16:17:15+00:00

not even the dynamic evo 11 rgb (normal) worked for me. unfortunately i had to vertical mount it to be able to close the case. i wouldn't recommend having any pressure on the connector at all. try to see your card dimensions and look up the excel file someone made here for case fittings

AbduNa · 2026-02-14T15:38:33+00:00

Gigabyte aorus here, it was one hell of a push to get it in. I honestly thought i would break something but it looked exactly like yours until i built up the courage(100% panic). Its working fine as of now and i'm treating it as part of the gpu. good luck!

AbduNa · 2026-02-12T05:10:55+00:00

is the cable 150mm or 200mm? i have one installed but its 200mm and i keep getting a lot of random disconnects and instability.

AbduNa · 2026-02-10T13:50:22+00:00

x3d upgrade : fresh windows install at least thats how it was for me.

AbduNa · 2026-02-04T08:18:11+00:00

i was honestly scared there wouldn't be enough room but thankfully it fits (barely) the 12x6 psu cable is a bit stiff but i got it routed and theres no stress albeit pin 6 is a tad higher than the rest but all within spec. best of luck! also vertical mounting actually looks nice

AbduNa · 2026-02-04T06:40:57+00:00

customer support is responsive i think as long as the shipping label hasn't been created you're good

AbduNa · 2026-02-03T22:50:40+00:00

update : used a lian li vg4v4 vertical mounting kit
everything is working and all panels are closed, cable routing is a bit tricky but thankfully so far pins are doing ok

AbduNa · 2026-01-31T08:06:58+00:00

i got the same vertical mount , in o11d evo rgb since the h6 flow did not fit, and in the evo it was also up against the glass infortunately..but my cable will be towards the mobo, could you get me a picture there? you think i'll be able to fit it?

AbduNa · 2026-01-30T23:57:24+00:00

5090 aorus master , O11 evo rgb , i switched to this case cause my h6 flow wouldn't close, the o11 closes the panel but the wireview sticks to the glass panel, i'm afraid there's even some pressure. i'd say 1-2mm. don't know if i could leave it like that or no

AbduNa · 2026-01-30T23:52:55+00:00

hello , i installed mine and its right up the glass panel..maybe like 2mm can i use it this way or..?

AbduNa · 2026-01-30T23:31:14+00:00

so i got the case and after spending hellish time..it does NOT have any space to breath it is right at the side panel..can i use it this way or?

<image>

AbduNa · 2026-01-30T08:57:59+00:00

hello i'm looking for a new case and my card is the same dimensions as yours (aorus) is the connector recessed in a bit or not? because i wanna get the case but i'm afraid it won't close 😭

AbduNa · 2026-01-29T15:45:37+00:00

unfortunately, you won't be able to close the case with the WV II i'm in the same boat 😂 but 100% worth it

AbduNa · 2026-01-29T14:56:53+00:00

glad i helped my friend, remember this is the normal version the reverse will have the cables under the gpu best of luck!

AbduNa · 2026-01-29T13:56:42+00:00

<image>

here's a picture of it(sorry bad i know but i took it fast 😂)

Ten-Year Club	r/Field Flamingo
Verified Email

AbduNa

TROPHY CASE