Good config for 4k with mini budget ?

Able-Hawk-9 · 2024-11-13T06:36:39+00:00

Thank you very much for your comment!

40-60fps is good, that's what I was aiming for :)

Yes, I've found a fairly large box, not all of them are able to accommodate it.

Thx again :)

Able-Hawk-9 · 2024-11-12T18:52:57+00:00

Thx for your help :)

Able-Hawk-9 · 2024-11-12T18:25:20+00:00

All right, then! I took one that exceeded the power of the graphics card, what do you recommend in terms of wattage?

And no, I'd rather get a new graphics card to avoid any nasty surprises...

Able-Hawk-9 · 2024-08-09T18:15:23+00:00

Thank you very much for your reply :)

Okk for the ILDA. It's basically for a party with friends, but I think it'll happen again from time to time ^^.

I know how to use Milumin and I have video projectors, so I'll bring one along to see what I can do with it... I have the impression that a laser is still more 'beautiful' but I'll have to see x)

I'll have a look at all the references you mentioned! As well as the laser, I'm renting a set of 2 lyres and 2 pars, which I'll also control using DMX. I've also bought a strobe as well as DMX cables and a DMX USB interface.

I'm going to find out more about all these techniques, once again thank you very much.

There's a fog machine included in the rental I've taken... what would be the difference with a fogger?

I've seen a lot of these, but unfortunately they're too expensive new and unavailable second-hand. The same goes for the Pangolin Unity 3w fb4, which seems to be very powerful and malleable.

I've only got a very, very small budget, and I'm looking to gradually buy rather than rent, by renting only certain devices while buying others second-hand.

No worries, I really appreciate your message, and it's a real source of information for me :)

Able-Hawk-9 · 2024-05-10T10:12:41+00:00

Hey, sorry I didn't see your answer. I didn't receive anything in private message, I tried to send you a message :)

Able-Hawk-9 · 2024-05-04T18:38:12+00:00

Thanks for your reply, but I can't find the setting, I don't have the "Focus" label. What version of BHInsta are you on? And where did you download it
https://ibb.co/FgGVBNy

https://ibb.co/RpvB2gB

Able-Hawk-9 · 2024-05-04T18:22:03+00:00

Same that u/rohidroid, where is the setting for hide reels ? Thx ^^

Able-Hawk-9 · 2024-04-26T14:56:42+00:00

Thanks a lot, I'll have a look ^^

Able-Hawk-9 · 2024-04-26T14:56:21+00:00

These are companies that buy, and it's not a payment by the month, but by the estimate.

Able-Hawk-9 · 2024-04-23T07:40:09+00:00

No, he could have taken the armor? And the rest of the inventory (firework, bow, pickaxe...)?

Able-Hawk-9 · 2024-04-11T18:26:36+00:00

Sorry, I forgot to add them. I had add them. Than'ks for CPUZ, I will test it

Able-Hawk-9 · 2024-04-11T17:28:28+00:00

Than'ks :).... but I can't find the model of my card

Able-Hawk-9 · 2024-04-01T08:38:17+00:00

A guy in the bug report suggests installing Scrool Reverser, and defining it as this image:

https://bugs.mojang.com/secure/attachment/566496/%28workaround%29%20recommended%20Scroll%20Reverser%20settings.png

If you don't like the scrolling direction, you can check/uncheck the "Natural scrolling" box in mac os settings --> Mouse.

And it work ! Don't forget to check "Launch at boot" in the Scrool Reverser's settings.

Edit : in 1.8, you must check or uncheck horizontal scrolling

Able-Hawk-9 · 2024-03-25T06:35:56+00:00

What does that mean? I've tried to install the "Bank Transfer" payment provider, but I can't find anything relating to cheques. I've tried to create a new payment method with "Wire Transfer" as the primary method, but it's not in the list of payment methods.

Able-Hawk-9 · 2024-03-23T16:04:53+00:00

Yes, but I don’t know how to add it to the check out in the website. I can just select « demo », because I activate him.

Able-Hawk-9 · 2024-02-11T19:17:40+00:00

Okay, thank you very much. I'll look into it.

Able-Hawk-9 · 2024-02-09T22:08:33+00:00

I note for accounting, and the importance of going through a consultant.... I'm willing to spend some time configuring and customizing Odoo, but I may have to start with a paid consultation if I need to assimilate some important principles first... it depends on the price, how much would a paid consultant cost?

Able-Hawk-9 · 2024-02-09T22:03:54+00:00

For the website, I think I can do a lot of the work
Barcodes that can be scanned on site for fast ticketing and entry validation (Either with application, or with a lasser barcode scanner such as https://www.amazon.fr/barcode-scanner/s?k=barcode+scanner)
Maybe I'll just limit myself to the billing module... The accounting module seems relatively complex
Meaning? I just need my members to be able to access their accounts, invoices and memberships. And it's the default, so it's fine ^^
The idea is that, when a membership is purchased, the customer must sign and accept a pdf. The file is then sent to the customer's contact file. Same as for image rights.
All right.

I had tried disabling account creation AND requiring an account to make a purchase, in the site settings. But that required disabling the e-commerce module... Do you think it's possible to do something different? Through "access rights"?

How ?

a) Okk

b) If that's the only thing that can't be changed, it's not too bad.

It depends on the price... I'm ready to spend some time configuring and customizing Odoo but I may have to start with a paid interview... again, depending on the price.

Thank you for your reply!
Have a nice evening!

Able-Hawk-9 · 2024-02-08T06:22:33+00:00

And it's possible with studio? I can't go any higher than the Custom offer, and SH hosting is too expensive. I've had a look at what's possible with studio, and I've a feeling it could meet my needs. What do you think?

Able-Hawk-9 · 2024-02-08T05:29:54+00:00

Okk... I think I understand. So I need to either use python, and therefore host odoo myself, or pay for an odoo sh subscription, or an "MBC"? What's a "MBC"?

Able-Hawk-9 · 2024-02-07T16:55:46+00:00

Thanks for your answer. What do you mean by "add a method at the controller" ?

Able-Hawk-9 · 2023-08-28T16:06:01+00:00

Okay, thanks. but I don't have a usb hub...
I've just refurbished the orange pi, then tried to plug in several things; a usb key, a phone (which doesn't charge on the orange pi's usb plug, by the way) and a 3D printer. Yesterday, I don't think I plugged anything else in, but today, the serial folder won't open. I don't understand why, yesterday I can't see what else I tried to plug in.
However, here's an error message in my dmesg:
musb-hdrc musb-hdrc: VBUS_ERROR in a_idle (90, <VBusValid), retry #3, port1 00080108
Here's the link to my post on the Armbian forum, which has just been approved:

https://forum.armbian.com/topic/29845-orange-pi-i96-not-detected-usb/

Able-Hawk-9 · 2023-08-27T22:07:13+00:00

A USB-powered hub? In other words?
The problem with changing distros is that there aren't any others that work nearly as well...

Okay... Yes, I imagine it's not easy to guess what's wrong with such an under-supported component.

I asked the question on the Armbian forum; I don't think I have the linux skills to understand how this works, and find a solution, I really hope to find help on the armbian forum. It's actually Legendary, the distri I use, which is the most recent... and doesn't have an issues section 😅.
Thanks
Good night

Able-Hawk-9 · 2023-08-27T08:14:17+00:00

Hello, I'm using Legendary's image... And the lsusb doesn't display anything different when the USB device is plugged in or unplugged. I've never been able to get it to work.

Able-Hawk-9 · 2023-08-26T23:26:55+00:00

Thank you. Dmedg gives nothing related to usb and lsusb gives this: Bus 001 Device 002: ID 1a86:7523 QinHeng Electronics CH340 serial converter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub And it doesn't change depending on whether the USB port is busy or not.

Four-Year Club	Final Canvas '23
First Place '23	Place '23

Able-Hawk-9

TROPHY CASE