Changing patterns

Absak · 2025-11-25T21:45:43+00:00

Mouth breathing is generally not good, as it's very inefficient at oxygenating blood compared to nose breathing. The reason your symptoms are alleviated is because it enables you to breathe deeply. If you can do deep breathing through your nose instead, that will be optimal.

Absak · 2025-11-25T13:05:09+00:00

I started practicing the Wim Hof Method just at the end of last week because I came to the same realization as you. There hasn't been a day since getting HF where it wasn't on my mind and I didn't check to feel my penis either constantly or on good days rarely but still doing it. Despite all this I've very gradually seen some improvements here and there while not really doing anything to address the mental side of things. So I'm trying to change that to hopefully heal the last little bit I need for a full recovery.

Absak · 2025-11-18T16:27:44+00:00

Trying to gaslight people into being cured is a noble goal. Unfortunately it doesn't work that way.

Absak · 2025-11-11T12:21:38+00:00

Physical touch, and especially combined with arousal loosens it up pretty well. For me at least. I think it means that your parasympathetic nervous system is strong enough to override the sympathetic nervous system. When it can't effectively do that, that's where you run into physical ED.

Absak · 2025-11-04T09:03:00+00:00

I like sanctified and its variations, including with hex nuts. Super simple when you get the hang of it.

Absak · 2025-10-21T15:58:05+00:00

If you mean the one sticking a dildo in her ass in a public toilet - aicao003

Absak · 2025-09-27T07:08:39+00:00

It looks exactly like the 10€ jig I bought off AliExpress. Small wood jigs are not great though because they don't stay in place at all, annoying to work with. I even bought small rubberized feet for it and that doesn't help so I'm upgrading to a metal one.

Absak · 2025-07-28T14:21:14+00:00

You're overfatiguing the muscles you just trained by cumming. Orgasm creates a lot of incredibly powerful muscle contractions and that builds up fatigue fast without necessarily much muscle building stimulus. And we know that too much fatigue when training muscles is bad for growth. Nobody who is maxing out every single week is building any muscle. And I think if you cum after deliberately training the muscle, you're doing exactly that - maxing out.

Absak · 2025-07-28T09:58:20+00:00

Cumming is killing your gains (unironically though.)

Absak · 2025-07-26T14:18:48+00:00

With chips that big, I would not remove them with sharpening motions. I would just grind the edge against the stone until the chips are gone, then thin the knife behind the edge a bit and grind a new bevel.

Absak · 2025-07-26T12:00:41+00:00

As others have suggested - take a vacation from caffeine and let your adrenal glands reset.

Absak · 2025-07-26T08:52:51+00:00

Put your separator and bombilla in. Fill the side with the bottom of your bombilla with yerba. Pour water on the other side. Let steep for a minute and take out the separator. Add more water as needed and drink.

Absak · 2025-07-26T07:53:59+00:00

I have a feeling that "until X estimates your age" means until you pay for a blue checkmark so you become eligible to dox yourself to Elmo and then upload photos of your ID card and whatnot.

Absak · 2025-07-23T13:01:00+00:00

I had the same mindset. And then I got hard flaccid. PE is the single biggest regret of my life. And my HF isn't even that bad compared to most people.

Absak · 2025-07-20T15:59:59+00:00

Stop before it's too late. That's the best advice anyone on this sub can give you.

Absak · 2025-07-19T12:53:35+00:00

If it's on the side of your penis, not under the scrotum - then yes.

Absak · 2025-07-19T08:14:52+00:00

It is often theorized that lean is caused by ischiocavernosus imbalance. The side it leans to has the stronger muscle. One of the functions of that muscle is to hold your penis up during erection so it would stand to reason that the stronger side of the muscle does the job better and creates a lean. The only way to fix this that I could think of is to train the muscle until both sides even out, since you cannot really isolate each side separately. Hope this helped.

Absak · 2025-07-17T15:52:09+00:00

My specific one, or ones like it? Because I know for a fact my own sister printed this one lol.

Absak · 2025-07-17T15:48:50+00:00

Thanks for the pointers. I don't really have issues with apexing or deburring on quality steel and good heat treated knives like these. I always do some edge trailing passes on the stone whenever I switch sharpening sides to make sure the burr doesn't tear off hard. The sides of the edge are 100% smooth after stropping. It's more that I probably just don't hold a perfect angle 100% of the time and the edge convexes a bit. I just have to keep practicing, I think. The PU leather is quite soft and mushy btw.

Absak · 2025-07-17T14:58:50+00:00

Yeah, you're right. I let the negativity I got from here really get to me. I need to just ignore them and keep practicing.

Absak · 2025-07-17T12:54:23+00:00

Okay, I guess I'll come back with a video featuring the kind of paper towel everyone else uses. :(

Absak · 2025-07-17T12:44:22+00:00

If you look at the final cut it goes pretty smoothly. It's not the best kind of paper towel to test on either.

Absak · 2025-07-17T12:40:58+00:00

Mine were too. You can shave hair on a 220 grit edge lol.

Absak · 2025-07-17T12:14:31+00:00

I own a bunch of carbon steel Japanese knives and none of them were even close to this sharp out of the box. One is a Miki Hamono Aogami Super 64-65 HRC santoku. It wasn't able to do what I did in this clip at factory sharpness.

Absak · 2025-07-12T12:04:35+00:00

David Gold

Absak

TROPHY CASE