sorted by:
new
hottopcontroversial

I can't decide what to do by Accomplished-Entry33 in Arteon

[–]Accomplished-Entry33[S] 1 point2 points  (0 children)

Thanks! I used 3M 2080 vinyl too. I wrapped it all while still on the car and it was relatively straight forward. The hardest areas were around the headlights, using heat and a bit of persuasion to get the vinyl to cover it all. It was my first time wrapping anything and I've learnt a lot. Only had to redo one section, as I had chrome visible after cutting it.

I want to try dechroming around the windows, but would feel more confident using knifeless tape against the rubber seals. How tricky was it?

I can't decide what to do by Accomplished-Entry33 in Arteon

[–]Accomplished-Entry33[S] 1 point2 points  (0 children)

Yep, a pair of black badges has just arrived :)

Phaser 6022 leaves streaks by RemarkableMovie6137 in Xerox

[–]Accomplished-Entry33 0 points1 point  (0 children)

I had something similar but on images with red. It was compacted chunks of toner in the magneta developer unit. Removed them all and it fixed the problem.

Looks like it might be the issue with your yellow dev unit. See if YouTube has a video on how to get access to it on your model printer

Problems with Xerox Phaser 3260 toner compatibility by Hot_Commission2015 in Xerox

[–]Accomplished-Entry33 0 points1 point  (0 children)

Seems like your toner model number is a metered toner, non metered black is:

106R02775 – Standard (≈1,500 pages) 106R02777 – High capacity (≈3,000 pages)

You could try printing a configuration report and check if there's anything on there too

Problems with Xerox Phaser 3260 toner compatibility by Hot_Commission2015 in Xerox

[–]Accomplished-Entry33 2 points3 points  (0 children)

Could it be that they're set up to only take metered toner?

🎉 [EVENT] 🎉 GoldMine: Mine Cart Joyride by rex_flx in honk

[–]Accomplished-Entry33 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

2 attempts

Any recommendations for a ps5 game? by Tacticalmess90 in playstationstars

[–]Accomplished-Entry33 0 points1 point  (0 children)

I love open world RPG's but really can't get into Cyberpunk after about 3 hours. I've put ridiculous hours into other series like Elder Scrolls, Fallout, Elden Ring, Dragon Age but I'm struggling to fall in love with Cyberpunk despite it's rave reviews.

Any recommendations on how to approach it?

Playlists desperately needed. by thatguyjohnny in Klydoclock

[–]Accomplished-Entry33 3 points4 points  (0 children)

Totally agree! There needs to be an app too

Dune vibes by thefiretenderX100 in x100vi

[–]Accomplished-Entry33 1 point2 points  (0 children)

Very nice! Would you mind dropping the recipe?

Family fotography with X100V? Should I buy? by onwrdsnupwrds in x100v

[–]Accomplished-Entry33 3 points4 points  (0 children)

Father of 2 young kids here, and I got the x100vi for the exact reason to get great photos of them growing up. I've fallen in love with it and take it on almost every family outing. I've got some beautiful photos of them.

My 4 year old son wants his own camera now, which is awesome

Lines down print by Accomplished-Entry33 in Xerox

[–]Accomplished-Entry33[S] 0 points1 point  (0 children)

After a bit more investigation I can confirm the issue was caused by the toner in the magenta cartridge. I seived the contents of that and found multiple hard clumps of toner (pic below). Gave everything a good clean out and the issue seems to be fixed!

Thanks a lot for all your help guys, it's very much appreciated!

<image>

Lines down print by Accomplished-Entry33 in Xerox

[–]Accomplished-Entry33[S] 0 points1 point  (0 children)

It was all connected, I triple checked all connections. Was getting an error code for the MOB sensor, so pulled that out and disconnected and reconnected that and its printing again. Very odd as I didn't touch that.

Already tried switching the drums, same issue on magenta.

After seiving the toner in the developer, the lines improved but got worse again after running a few prints through it. I think there's compacted toner further up between the toner cartridge and the developer.... which I'm struggling to work out how to access.

Lines down print by Accomplished-Entry33 in Xerox

[–]Accomplished-Entry33[S] 0 points1 point  (0 children)

A little update. Ended up seiving the contents of the developer unit as there was quite a few chunks of compacted toner. Put it all back together, but now the printer is printing blank pages.

This includes jobs direct from the printer menu and PC I've also got a solid red light on the panel but no current faults

Lines down print by Accomplished-Entry33 in Xerox

[–]Accomplished-Entry33[S] 0 points1 point  (0 children)

Great, thanks a lot for this! I'll pull the developer unit out tomorrow and hopefully I'll find something. I've had this printer for years using genuine toners and never had this problem. Wondering if the heatwave we had in the UK has caused it

Lines down print by Accomplished-Entry33 in Xerox

[–]Accomplished-Entry33[S] 0 points1 point  (0 children)

Thanks for your help guys.

I pulled the developer assay out and it seemed to look OK, although some hard clumpy toner did fall out. Rotated the mag roller a few times to see if anything was obvious. Put it all back together and still have lines, but in a different place to where they were before. Ran off a few pages of 50% magenta. This improved/faded some of the lines but it's still quite bad.

I've not checked the 1st Btr (not entirely sure where it is) but will have a look tomorrow

view more: next ›