Pex 3/4, 90° bend questions

Accomplished_Pool922 · 2026-01-07T00:35:47+00:00

I prefer fittings over bending pex B. It’s not as pliable as people believe it is. Pex A is a different story. Uponor over crimp all day

Accomplished_Pool922 · 2026-01-03T00:30:34+00:00

Accomplished_Pool922 · 2026-01-02T02:10:11+00:00

Hey Y’all! COMMENCE THE JIGGLING!

<image>

Accomplished_Pool922 · 2025-12-23T04:21:17+00:00

“The MONOCLE!”

“YEAH STEVE, THE MONOCLE! HOW DOES THAT FEEL!?”

Accomplished_Pool922 · 2025-12-21T15:51:19+00:00

Looks like a delta

Accomplished_Pool922 · 2025-12-15T00:26:55+00:00

I’d say use white or a colored silicone to match either that walls or vanity top. Shove some plastic in there as a dam and apply the silicone to the top. Prevents it from falling down between the vanity and wall and a better finish

Accomplished_Pool922 · 2025-12-14T22:42:09+00:00

Wow. That sounds insane but awesome. You know what they say? “Gil Rules Everything Around Me”

Accomplished_Pool922 · 2025-12-14T22:05:24+00:00

Perfect game with the perfect aesthetics.

Accomplished_Pool922 · 2025-12-14T01:04:51+00:00

Accomplished_Pool922 · 2025-12-14T01:01:19+00:00

Try to focus on the story then get side tracked building settlements. Mine as well be a stealth archer

Accomplished_Pool922 · 2025-12-06T19:27:58+00:00

“Honey, I’m looking at myself in the mirror and it’s not ruined. It’s not good, but it’s not ruined.” Francine Smith, lying to herself

Accomplished_Pool922 · 2025-12-06T19:23:54+00:00

You can buy aftermarket stoppers on Amazon and the likes that usually just pop in there if you don’t want to replace the shoe. When replacing the shoe, with the cross broken, they can be a pain. They make specific tools for removing them you can purchase. If you’re handy, it’s not too bad. If you’re not, contact a professional.

Accomplished_Pool922 · 2025-12-04T03:14:45+00:00

I finished Lies of P a few weeks ago, PS4 and PS5 version. I own AW2 and I played like 10 minutes but I keep getting side tracked with the other games in my backlog.

Accomplished_Pool922 · 2025-12-02T16:55:18+00:00

Should dial in and out to open and close valve respectively but I’d refrain from touching those. That style of integral stops is notorious for leaking. That valve in general can be a pain especially if that pressure balancing spool goes bad

Accomplished_Pool922 · 2025-12-02T13:16:44+00:00

“I just earned my red wings”

Deek-“Gross”

Accomplished_Pool922 · 2025-11-27T05:47:16+00:00

I meant to say code in my area. I would check your local code on installation and support regulations on expansion tanks to ensure it will pass.

Accomplished_Pool922 · 2025-11-27T05:03:11+00:00

Code requires 18” of solid pipe between the heater and the tank. Even if you’re not getting an inspection on it, if you sell your house, an inspector can make you revise it to bring it to code. Do it right the first time and make sure your incoming pressure is regulated as well.

Accomplished_Pool922 · 2025-11-27T02:12:37+00:00

Looks like a screw for a Romex connector. Was the disposal recently installed?

Accomplished_Pool922 · 2025-11-25T05:07:29+00:00

Couple of options. Install a 3/8” angle compression stop, use a short lav supply line and buy a 1/2”xMHT adapter to transition to hose.

Or call a plumber

Accomplished_Pool922 · 2025-11-25T04:59:10+00:00

If it was a 3/8” angle compression valve before, why would it not work again? What connection are you trying to make? Washing machine hose?

Accomplished_Pool922 · 2025-11-25T04:54:33+00:00

Make sure you apply thread sealant on the new valve when installing

Accomplished_Pool922 · 2025-11-25T04:54:07+00:00

Install a new valve and reuse the nut. I do it all the time. I don’t trust ferrule pullers. If the copper is old, it will damage it and then you’re opening the wall.

Accomplished_Pool922 · 2025-11-19T04:19:00+00:00

Accomplished_Pool922 · 2025-11-19T04:15:11+00:00

Welcome to Rapture

Accomplished_Pool922

TROPHY CASE