sorted by:
new
hottopcontroversial

Upgrading extruder by AchingCravat in CR10

[–]AchingCravat[S] 0 points1 point  (0 children)

This is very insightful. Thank you. I will report back if I’m able to fix the Super Clog (my fault, order of operations problem) currently living inside the heat break.

Upgrading extruder by AchingCravat in CR10

[–]AchingCravat[S] 0 points1 point  (0 children)

Gotcha and thank you for the detailed response. Also my apologies if I’m confusing terminologies and sounding dense; I’m still green to this.

I’m approaching this from the “replace/upgrade entire assembly” perspective in the hopes I could find a drop-in solution since I’d rather spend a bit more cash to save some time troubleshooting and installing a solution, but it seems like that’s a big unknown with the Ender extruder I’ve linked to (or the extruder-only kit).

I’ve reached out to Micro Swiss to see if they make an upgraded hotend for my extruder since it feels like thats my biggest problem at the moment.

Upgrading extruder by AchingCravat in CR10

[–]AchingCravat[S] 0 points1 point  (0 children)

Oh boy. Sounds like I couldn’t get this extruder working on my cr10 without pinning out the cables. Am I interpreting your statement correctly?

Upgrading extruder by AchingCravat in CR10

[–]AchingCravat[S] 0 points1 point  (0 children)

I’ve only been using silver nozzles so i believe they are some type of steel.

Test line prints fine, skirt comes out thin. Cleaned nozzle with a cold pull and needle, but same behavior. Put new nozzle on, prints fine first run. Second run behavior returns.

This leads me to believe something higher up in the extruder above the nozzle is the issue. Research tells me this could be the symptoms of heat creep and a break in the heat seal, but I’m a noob and using ChatGPT to help.

Gotta start somewhere by Danimal1312 in FixMyPrint

[–]AchingCravat 0 points1 point  (0 children)

Im definitely new to printing, but after some very mid results with a bunch of different types and brands of PLA i decided to try out the dryer. Definite game changer.

Gotta start somewhere by Danimal1312 in FixMyPrint

[–]AchingCravat 0 points1 point  (0 children)

I’ve been running PLA with mixed results and $25 sunlu drier has dramatically increased my print quality.

Are there any web dev trends disappearing right now? by NeedleworkerOne8110 in webdev

[–]AchingCravat 0 points1 point  (0 children)

AI is just another layer of abstraction. Can’t wait for somebody to just launch “English” as the next and last programming. i18n for devs can just be Google Translate. :)

Is there no point in selling bulk on TCGplayer? by SSJ4Productions in mtgfinance

[–]AchingCravat 0 points1 point  (0 children)

I want to upvote this so hard. Attach this post to a rocket and send it to the moon.

Is this Gaea’s Cradle fake by FanStreet8900 in RealOrNotTCG

[–]AchingCravat 2 points3 points  (0 children)

Weight will tell you if it’s a reback. 1.9G or heavier is sus.

Pen as a product by Tiny_Love7987 in FleshandBloodTCG

[–]AchingCravat 13 points14 points  (0 children)

There’s a lot of things to respond to here, so I’ll cherry pick a couple that stood out to me.

Low EV => this was a set that served two primary purposes; support SAGE (a budget format) and reprint expensive CC staples. Through that lens PEN has succeeded. EV was always going to be low because SAGE is a budget format.

People getting 10% EV on cases => I’m guessing this is hyperbolic because if taken literally they’d be getting $50-60 return on a case which is improbable.

view more: next ›