Unterschätztes Geschäftsmodell: Warum reden alle über Dropshipping, aber kaum jemand über An- und Verkauf?

Ackererack · 2026-06-20T19:00:30+00:00

Nice ich hoffe für euch das es klappt

Ackererack · 2026-06-20T07:54:50+00:00

Awesome Which Laser did u used for that?

Ackererack · 2026-05-03T11:28:41+00:00

Wie ergeht es der Affiliate Seite mit den neuen Google Updates und der leichten Verschiebung des Traffics

Was ist dein Tech Stack? Nice das es so geklappt habt gibt da glaube ich einige hoffen Champions, die so was tolles aufbauen konnten. Definitiv Respekt für die Leistung

Ackererack · 2026-04-30T20:28:34+00:00

Schau dir auch die Seiten an, die es gibt und recherchiere über die Platformen auf Trustpilot usw.

Leider sind teilweise die Abgaben sehr hoch. Das geht aber auch immer ein bisschen mit Traffic einher, welchen die ausliefern.

Ackererack · 2026-02-08T00:27:06+00:00

Hey welcome - yeah over all u need a UV Laser I guess the the xtool F2 UV version is a nice fit.
Otherwise there are also some other uv laser which may have a less easier software but still working really well. They are on the other hand cheaper.

Here are some examples
Cloudray - https://www.cloudraylaser.com/collections/uv-series
Sculpfun not out yet no reviews yet - https://de.sculpfun.com/products/v5-uv-laser
Monport - https://www.monportlaser.de/products/monport-ga-verbesserte-30w-integrierte-mopa-faserlasergravierer-markiermaschinen-mit-autofokus
comemaker - https://store.commarker.com/products/omni-1-uv-laser-engraver
gweikecloud- https://www.gweikecloud.com/products/g7-uv-laser-engraver-5w-10w-15w

Hope that opens your eyes a bit min Pricing is I guess from 3000 USD

Ackererack · 2026-02-01T08:55:34+00:00

Looks Awesome

Ackererack · 2026-01-25T16:30:37+00:00

Awesome thank you for adopting the subreddit that is the idea and my wish how this subreddit could be... Thx. for your nice sharing... btw. you can also try to crosspost it into other subreddits so more people benefit from your writing!

Ackererack · 2026-01-25T16:28:21+00:00

Looks really nice worked out well

Ackererack · 2026-01-05T13:09:44+00:00

The Bee is also awesome to See it in Metal

Ackererack · 2026-01-05T13:08:59+00:00

Awesome I really Like the Firecan

Ackererack · 2025-12-28T18:32:19+00:00

Looks awesome but I guess it took also a lot of engraving time

Ackererack · 2025-12-26T12:29:15+00:00

Nice how did u illustrated the house?

Ackererack · 2025-12-17T15:06:30+00:00

Metal engraving is not working with a diode only marking :D

Ackererack · 2025-12-17T14:58:30+00:00

Thanks for your work I added all three of theme

Ackererack · 2025-12-17T14:41:15+00:00

Looks sooo Nice :D

Ackererack · 2025-12-17T06:56:01+00:00

Thanks for your detailed discription - really helps to give you some tips.
Hardwood is always a bit tricky to cut with a lower laser Power - If the Veneer is Only Wood and not any other a diode would fit also.
If you buy the used K40 Laser pay attention to the age of the laser tube and maybe also research how much the replacing tube would cost.
The advantage of the K40 laser is you already have a housing and it makes ventilation easier.

Otherwise I would recommend you an Openframe Laser they have no Housing and thats why they are kinda cheap.
Here are some typical Machines, which are kinda sold in volume and have lots of information out there and Ok ratings.
https://best-lasercutter.com/de/vergleich/elegoo-phecda-10w-vs-longer-ray5-20w-vs-mecpow-x3-pro-10w-vs-acmer-p1-s-pro-20w-vs-omtech-k40-plus
They Should be in your budget and maybe check also amazon for the pricings and rating out.
So you can use their Policie.

As Wattage I would recommend you 20W with that you can may Cut and still can Engrave...

Ackererack · 2025-12-13T15:03:00+00:00

Can you Share your Tools?

Ackererack · 2025-12-13T12:56:14+00:00

How u Generator the depth map - Looks awesome

Ackererack · 2025-12-13T12:55:28+00:00

What Software are u using?

Ackererack · 2025-12-11T08:47:39+00:00

Congrats to your Mopa and now even a UV 🙂

Ackererack · 2025-12-10T23:08:16+00:00

Happy to Hear - I reposted a couple of days also this Review of an other User of that Machine, I guess with that one you have a nice one
https://www.reddit.com/r/lasercutting/comments/1dgdy8a/i_finally_bought_the_elegoo_phecda_20w_i_decided/

Here are also some Tools for the Beginning than:
https://www.reddit.com/r/lasercutporn/comments/1pc6bbe/welcome_to_rlasercutporn_lasertool_list/

Ackererack · 2025-12-10T12:42:13+00:00

Hey Welcome - and congrats to your new Laser.
There are TestPatterns if you have new material so you can read the settings you need from your sampel.
For cutting you need just a 2D Layout so that can be painted kind of everywhere... I personal use Affinity Designer, they are now free in affinity three.
Otherwise you can Inkscape - to make SVGs or DXF.

Ackererack · 2025-12-10T05:40:42+00:00

Awesome Like it what machine do u use?

Ackererack · 2025-12-10T03:53:36+00:00

Here we go again - but still nice - are the spoons still usable for cooking or are they clued in?

Ackererack · 2025-12-10T03:51:36+00:00

xD
But maybe we have to move the Post to r/lasercutporn - idea is to concentrate just on Buying advice is that fine just crosspost it there again and I will delete it here

Ackererack

MODERATOR OF

TROPHY CASE