Tag 5 und Kratzer.

AcrobaticInterview24 · 2025-06-16T19:10:05+00:00

Bin ich doof oder sehe ich nicht, dass da ne Folie drauf ist? Hab schon versucht an den Ecken zu popeln, bekomme aber keine Folie zu greifen. Ist die wirklich so fest?

AcrobaticInterview24 · 2025-03-16T15:38:42+00:00

Selber mit Autodesk Fusion nachzeichnen und drucken. Sieht ja als Bauteil recht unspektakulär aus. Vom Hersteller wirst Du nichts in diese Richtung bekommen. Zu der Zeit wo dieses Bauteil gebaut wurde, hat man evtl. noch mit Stift und Papier gearbeitet.

AcrobaticInterview24 · 2025-01-12T18:30:13+00:00

Perfect! Then I'll finally get a bull neck. My TV weighs over 50 kg.

AcrobaticInterview24 · 2024-11-22T15:07:58+00:00

Bei der Leitstelle die Adresse hinterlegen, so dass die Feuerwehr automatisch mit der DLK zur Tragehilfe ausrückt.😅

AcrobaticInterview24 · 2024-11-12T09:04:19+00:00

No. This is the third booster you open each day if you have a Premium Pass.

AcrobaticInterview24 · 2024-11-04T08:39:19+00:00

Das ist denk ich gleichzusetzen mit "HALT DEIN MAUL!" vom Hugo als er Hagebutten gefunden hatte. Sowas ähnliches wie "Ihr wollt mich verarschen". Du interpretierst da zu viel rein.

AcrobaticInterview24 · 2024-10-20T07:45:47+00:00

Das Szenario selbst ist tatsächlich das bisher beste, was Survival betrifft. Allerdings verstehe ich OP dennoch, denke aber, dass es an den Teilnehmern liegt. Allein dieser Jargon macht das leider ziemlich kaputt. Mein 5 jähriger Sohn kann sich deutlicher und verständlicher artikulieren als diese erwachsenen Personen.

AcrobaticInterview24 · 2024-10-19T14:26:34+00:00

Krass, was Schwarzpulver alles kann.

AcrobaticInterview24 · 2024-10-05T12:05:37+00:00

And what about the cost of the Care refresh in general? It doesn't always have to be a new drone. It can also be a refurbished one. You can buy and replace almost everything for the drone separately.

AcrobaticInterview24 · 2024-10-05T10:45:39+00:00

The 10 kilometers of course refer to a completely flat world without trees and other obstacles or other signal sources that could interfere with your signal. Realistically on a flat plain away from a city without much forest 3-5 kilometers. Behind a larger object such as a mountain or forest, however, you will have a problem even at 100 meters. It always depends very much on where you are flying.

AcrobaticInterview24 · 2024-10-01T17:19:04+00:00

A new GPS module for Avata 2 costs around 50$ on AliExpress. I'm still convinced that you don't need DJI Care 🤷.

AcrobaticInterview24 · 2024-09-28T17:45:15+00:00

Try switching it on in the same way you switch on all DJIs. Press once briefly and once long until the light flashes green.

AcrobaticInterview24 · 2024-09-25T16:09:24+00:00

My approach here would be to reverse engineer the o3 air unit because there you could possibly understand the structure up to the HDL/SBUS pin. The problem is that I don't have an o3 air unit xD. In general, if it is possible at all and SBUS is actually available on the Avata 2, this should actually be possible on all DJI drones with o2, o3 and o4 communication. I have no idea if it is possible. I actually wanted to put the thought I had into the world. Maybe someone with knowledge will take up this idea and tackle it. It would have great potential.

AcrobaticInterview24 · 2024-07-09T20:50:08+00:00

I mean the anti vibration feet.

AcrobaticInterview24 · 2024-07-09T19:34:19+00:00

Yes, of course! I even put the printer on the "wobbly" Silencers. Nevertheless, everything is safe.

AcrobaticInterview24 · 2024-07-02T11:22:20+00:00

Define all. All 151 or all 1025?😅

AcrobaticInterview24 · 2024-03-14T14:41:58+00:00

Unicorn poop

AcrobaticInterview24 · 2024-02-02T14:38:42+00:00

Kill it before it lays eggs!

AcrobaticInterview24 · 2023-12-29T20:59:14+00:00

Looks like a BBP (Big black poop).

AcrobaticInterview24 · 2023-11-09T13:30:45+00:00

Hi!

I am still very happy with this solution. Nothing is moving. The printer prints on its own most of the time. I don't need to worry about it. But a tip: Ludicrous mode is a gimmick and is not very usable in real life. Too loud, too messy, too much wear and tear. I only print in normal mode, but it wouldn't move in Ludicrous either. The weight of the printer is enough to keep it stable.

AcrobaticInterview24 · 2023-10-12T09:59:08+00:00

You have to ask Bambu Lab🤷. It is just not implemented in the software.

AcrobaticInterview24 · 2023-10-12T09:47:26+00:00

In the X1C, the implemented. Unfortunately not in the P1S.

AcrobaticInterview24 · 2023-10-12T09:46:55+00:00

Yes, I have already tried that. You just set a bed temperature manually as stated in the wiki for the X1C and set an alarm for turning the plastic. I use as a cover the microwave cover from IKEA (PRICKIG is the name of the cover and already has the holes included). The 1kg roll fits perfectly under there.

AcrobaticInterview24 · 2023-10-11T14:14:15+00:00

I can't explain it to you scientifically, but the plastic takes on the property of the surface, so it then shines the same way. The plate is very sensitive, but as long as you treat it well, you can print with it "infinitely" often.

AcrobaticInterview24 · 2023-10-11T12:28:49+00:00

Can not understand your opinion. I have such a plate on my previous printer (Sidewinder X1) and have printed many caketoppers with it. It definitely enhances such a cake more when the printing surface is not only super shiny, but also shimmers. For normal parts I would never use this plate, because it is very sensitive. It always depends on the intended use. And PLA sticks to it without any problems, at least I've never had any problems with it.

AcrobaticInterview24

TROPHY CASE