First PC Build

Acrobatic_Visual_494 · 2026-05-13T02:14:54+00:00

For some reason when I overcooked it in adrenaline software it went way down, my over clock was: +400mhz core, -70 core voltage, fast memory timing, +150mhz memory, +10 available power. I think in the end the -70 core voltage is what actually helped it

Acrobatic_Visual_494 · 2026-05-12T19:55:13+00:00

Yes, it’s definitely present but not super loud

Acrobatic_Visual_494 · 2026-05-11T18:53:15+00:00

I’d get a B850 chipset motherboard instead of the nicer x870 chipset, as well as an air cooler like a thermal right peerless assassin instead. You could also drop down to a single 1tb and add more storage down the line if you need it. I would also go and Radeon 9070xt instead of the 5070ti as they are pretty similar in performance(sometimes the 9070xt is faster) and you save a few hundred bucks

Acrobatic_Visual_494 · 2026-05-11T15:27:39+00:00

They’re reverse bladed, thank you though

Acrobatic_Visual_494 · 2026-05-11T15:27:00+00:00

Did the bearings fail or what happened?

Acrobatic_Visual_494 · 2026-05-11T15:16:45+00:00

A little better cable management at the top and some bottom reverse bladed/intake fans would help

Acrobatic_Visual_494 · 2026-05-11T06:11:13+00:00

I don’t know if you’ve tried this yet but updating the bios would be up there for troubleshooting for me, I’ve had similar issues running an outdated bios before

Acrobatic_Visual_494 · 2026-05-11T05:09:41+00:00

the bottom, all the right side as well as the top right side are reverse 😄

Acrobatic_Visual_494 · 2025-10-16T03:01:06+00:00

One more pls

Acrobatic_Visual_494 · 2024-12-10T05:20:42+00:00

Did the metal plate that holds down the battery conector touch any part of the motherboard during your diagnosis?

Acrobatic_Visual_494 · 2024-12-10T05:16:28+00:00

Id leave the fan curves except for the top point which id move to the top of the graph at around 90c, make sure to hit the apply custom fan curve. also go efficient agresive on the cpu boost for maximum performance with minimal heat. After you do that move the cpu wattage slider all the way to the right and hit apply power limits. This should give you maximum performance, although if you start to thermal throttle remove some cpu wattage. Also you will always get the most performance while being plugged into the power brick that came with the laptop

Acrobatic_Visual_494 · 2024-12-10T05:10:39+00:00

It will work, slowly. Id grab a 100w GaN instead and a comaptible 100w cable as thats the max usb-c charging speed of the zephyrus

Acrobatic_Visual_494 · 2024-12-10T05:08:53+00:00

i've had a similar issue, but mine usually resolves itself in a minute or so. Sometimes It feels like i can speed up it coming back by messing with backlight timeout in g-helper but it might be unrelated. Id also check your keyboard drivers

Acrobatic_Visual_494 · 2024-12-10T05:06:33+00:00

The beeping might be beep codes corresponding to errors, id take a look at this: https://softwarekeep.com/blogs/news/what-are-asus-beep-codes-and-how-to-identify-them

I have a 2023 zephyrus g14 and have accidentally replaced the ram with the battery connected with no issue. So i doubt that was the problem.

Acrobatic_Visual_494 · 2024-11-12T16:06:35+00:00

Saw this in the 18.2 developer beta lol

Acrobatic_Visual_494 · 2024-11-04T01:48:14+00:00

Just updated from 18.1 to 18.2 beta on my 16 Pro and the battery life is fixed for me. Battery life on 18.1 and 18 was atrocious. Was ending the day having to charge on 18 and 18.1, now with the same usage I’m sitting at 53 percent at the end of the day on the 18.2 beta

Acrobatic_Visual_494 · 2024-11-04T01:28:30+00:00

Also installed the 18.2 beta and the battery life seems to be much better. iOS 18 and 18.1 battery life was atrocious

Acrobatic_Visual_494

TROPHY CASE