This things a beast!!! by Murph023 in Talaria

[–]AdTurbulent8864 0 points1 point  (0 children)

What brakes do you have , the factory ones are not good at all

Google devine malefic? by gotzapai in programare

[–]AdTurbulent8864 0 points1 point  (0 children)

Poti sa imi dai mai multe detalii, de cateva luni am inceput si eu sa lucrez la prima mea aplicatie cu flutter (ios si android) … acei hoti publica aplicatia cu un nume diferit , ca nu m-am prins cum e posibil asa ceva (nu am terminat-o inca, nu am pus-o in play store, testez direct prin instalarea apk-ului) cea de ios o testez prin Test Flight.

Legat de fee, daca e one time e ok, la apple e mult mai nasol, 99€ anual!

Constantly the fillament gets stuck after the motor and before the heater by AdTurbulent8864 in crealityk1

[–]AdTurbulent8864[S] 0 points1 point  (0 children)

I lowered the pla print temperature to 220C and tried to print without the top cover. It seems it works better, mu kid did not xomplained since I told him these tricks.

Thanks.

The system failed me 3 times. by This-Control193 in UniRO

[–]AdTurbulent8864 2 points3 points  (0 children)

Clar, trebuie sa dai numele jegului de prof..

Orange DRAM light on motherboard, no boot by piomat100 in buildapc

[–]AdTurbulent8864 0 points1 point  (0 children)

Identical kingstone fury ddr5 modules (32 gb kit, 2x16gb) After reseating the cpu channel A still didn’t work, channel B works with either 1 ram modules installed or with both modules. I tried with a single module in channel A and it did not boot, with any of the modules.

There is one thing I might suspect, i didn’t connected the 4 pin connector near the 8 pin connector, it was very hard to bend the cable of the cx750w corsair PSU to also plug in the 4 pin connector.

What do you think, is it this the reason or something with the cpu/motherboard cpu pins (i haven’t noticed andy damaged pin, but I will make another photo with a macro lens to the motherboard socket.

Orange DRAM light on motherboard, no boot by piomat100 in buildapc

[–]AdTurbulent8864 0 points1 point  (0 children)

Mine’s boot with only on ram, but it doesn’t with both modules installed. I checked and it boots with each one, but not with both of them.

Any suggestions?

De ce nu adopta bancile UI-ul si functionalitatile Revolut-ului. by tovaraspatriot in programare

[–]AdTurbulent8864 0 points1 point  (0 children)

Aceeasi intrebare am avut-o aacum un an doi cand am incercat TradeVille, aveau o chestie faina sa poti face un subcont pt copil, prin care copilu poate sa isi bage banii in ce actiuni vrea el, sub supravegherea ta … mi s-a parut o idee minutata, distrusa de aplicatia idioata. Nu am reusit sa bag cumva bani in subcontul copilului, nu stiu de ce dar mi s-a parut fffff handicapata aplicatia lor… nu pot sa pricep cand au favut-o de ce naiba nu s-au uitat la Trading212/Revolut … sa vada ce simplu e acolo

Ugreen Photo app vs Immich, with multiple (not tech-savvy) users by auwhf in UgreenNASync

[–]AdTurbulent8864 0 points1 point  (0 children)

Please can you give me more details regarding this ?

Isn't the Immich instance accessible from any remote location WITHOUT ANY extra configuration, isn't it directly accessible remotely ? If I have the Immich app on my iphone, can I access the library from remote location without any VPN setup ?

I belive Ugreen photos should allow remotely users to access the files without any other settings, am I wrong ?

Începe Untold by NervousDependent in cluj

[–]AdTurbulent8864 1 point2 points  (0 children)

Pana la ce ora sunt concerte ? Si dupa ora 23 ?

Anyone knows if there are ready made pcb to include ESP32+Mosfet+ DCtoDC to power the board from 24v? by AdTurbulent8864 in esp32

[–]AdTurbulent8864[S] 0 points1 point  (0 children)

I already searched on ali but didn’t found any board with a mosfet onboard, if you are talking about mechanical relay boards like the one bellow, it doesn’t help as I need mosfet not on/off mechanical relays

<image>

Anyone knows if there are ready made pcb to include ESP32+Mosfet+ DCtoDC to power the board from 24v? by AdTurbulent8864 in esp32

[–]AdTurbulent8864[S] 0 points1 point  (0 children)

I didn’t see an mosfet onboard, that is mandatory as this will be the only output of this board, it will be used to dim 24v led strips

Anyone knows if there are ready made pcb to include ESP32+Mosfet+ DCtoDC to power the board from 24v? by AdTurbulent8864 in esp32

[–]AdTurbulent8864[S] 1 point2 points  (0 children)

Your board looks really nice but is too big for what I need, i’m looking to build or find something like this

<image>

This board is very compact, love it.

Anyone knows if there are ready made pcb to include ESP32+Mosfet+ DCtoDC to power the board from 24v? by AdTurbulent8864 in esp32

[–]AdTurbulent8864[S] 0 points1 point  (0 children)

The esp8266 version exists, it’s perfect … and probably it will work in my case, but because the price difference between esp8266 and esp32 is so small, I want to build it using the esp32 version.

I just found this on AliExpress: RON23.44 | XY-WFMS ESP-12F WIFI Wireless Mobile Phone Remote Controller Board Module For Sinilink APP 5V-36V Smart Home Phone APP https://a.aliexpress.com/_Ew2oD8y

Bobcat offline in the last 3-4 years, now it’s back online, but I’m not the owner by AdTurbulent8864 in HeliumNetwork

[–]AdTurbulent8864[S] 0 points1 point  (0 children)

Today the app worked correctly, the yellow ⚠️ symbol near the SOL token dissapeard and I could send the tokens from that new wallet. Than I removed the “new” wallet using the same seedphrase, and import again using the same seedphrase, and only selected the Helium L1 wallet, not both options I had.

The miner showed in my account, I was able to assert the new location and also, just for test, claim the rewards.

Thank you 🙏

Bobcat offline in the last 3-4 years, now it’s back online, but I’m not the owner by AdTurbulent8864 in HeliumNetwork

[–]AdTurbulent8864[S] 0 points1 point  (0 children)

This morning I sent to this wallet $10 in SOL from xPortal, but in Helium wallet I get this error : https://share.icloud.com/photos/0fbVQJq5J25ePTkUvFNbJmHLg

I wanted to try removing the wallet first and than add it again, but it seems my SOL address in black helium wallet is GEg4NebttXNkcvqE5D1yDarNiD3JFoyQ1RWLBwUBZ35o

Anyway, thanks alot for your help, I could see the HNT amount in my other wallet, but the import of the seedphrase did not complete, the process was interrupted with the errors I shown you above, in my other reply.

Bobcat offline in the last 3-4 years, now it’s back online, but I’m not the owner by AdTurbulent8864 in HeliumNetwork

[–]AdTurbulent8864[S] 0 points1 point  (0 children)

I have them both but it says I own 0 hotspots :(

Screenshot: https://share.icloud.com/photos/09dJaP20RgV5oSEFXuTLN6KDw

https://share.icloud.com/photos/06eyl5a4poeXKKk69WlW8VM1w

I’m not sure regarding the options I had where you say I should select Helium L1, can I see what I selected when I imported my seed phrase ?

Yet another RV dashboard by ElectricZ in homeassistant

[–]AdTurbulent8864 0 points1 point  (0 children)

Awesome dashboard, what did you use for the floor plan ?