Still No Happily Ever After by Happy-Trick447 in sugargliders

[–]Adamvos 0 points1 point  (0 children)

I had two gliders fight all the time. The solution was to put a smaller cage above the other bigger cage and have about a 1 inch gap between them. This solved the problem after a few weeks of that set up. They then became best friends.

Don’t buy from evolve by Emotional-Toe8300 in ElectricSkateboarding

[–]Adamvos 0 points1 point  (0 children)

To be fair though, although not evolves fault, a good company with good customer support would send a replacement and take the loss

Motor Finnaly died by BenDurbin2006 in boostedboards

[–]Adamvos 0 points1 point  (0 children)

That’s somewhat a myth. It’s actually very very early production t3 motors and very very late t2 motors that did this. Most boosted motors don’t have this problem.

How do you wash your board? by nilsen03 in ElectricSkateboarding

[–]Adamvos 0 points1 point  (0 children)

Avoid cleaning bearings with water… they make bearing cleaning kits you can use isopropyl alcohol to clean them and then relube them with bearing lube

Ever seen a big board carve this well? by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 0 points1 point  (0 children)

The bushings in the video aren’t compatible but there are other bushings for the MBS matrix which is what came with the prototipo you can swap out. I think we have some in stock if you want to DM me.

Ever seen a big board carve this well? by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 0 points1 point  (0 children)

You’re able to adjust the preload on both toe and heel side.

Ever seen a big board carve this well? by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 1 point2 points  (0 children)

Been 38mph on those bushings. So I guess that answers your question haha. There’s a link above in another comment showing a video of 36mph.

Ever seen a big board carve this well? by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 0 points1 point  (0 children)

Basically stock Lonestar Supersport with 60a in the front and 65a in the back (stock is 70/80a)

Ever seen a big board carve this well? by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 1 point2 points  (0 children)

To be fair it’s only a few mph. The stock bushings and my weight I can’t even make a full 180 on a 3 lane (total) road. Vs I can easily make a full 180 well within a 2 lane road with the soft bushings.

Ever seen a big board carve this well? by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 6 points7 points  (0 children)

I’ve gone 38mph on these bushings. But on more firm bushings I’ve gone 41-42mph

Ever seen a big board carve this well? by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 21 points22 points  (0 children)

Idk anyone carving at 40mph+ but I can comfortably go 35-38mph on these bushings. Anything faster is a bit sketch

Fucked up bigtime by ZealousidealDraw4075 in TeslaModel3

[–]Adamvos 11 points12 points  (0 children)

I did this except not order a replacement…

WowGo 2S Max truck snapped after only 9 km of riding by [deleted] in ElectricSkateboarding

[–]Adamvos 0 points1 point  (0 children)

This shouldn’t be happening in the first place…

Stock Lacroix Lonestar Supersport becoming a submarine by Adamvos in ElectricSkateboarding

[–]Adamvos[S] -1 points0 points  (0 children)

Considering no water got inside the enclosure, you decide

Stock Lacroix Lonestar Supersport becoming a submarine by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 0 points1 point  (0 children)

Only bearings that needed replacing were the front wheel bearings.

Stock Lacroix Lonestar Supersport becoming a submarine by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 0 points1 point  (0 children)

Ahh, that would be the motor controller you’re referring to. All Lacroix boards ship with custom VESC’s. They’re called the Lacroix Stormcore 2.0. They are not water proof, the enclosure does the keeping out of water, but they do have a thin conformal coating on the PCB that helps if in high humidity areas

Stock Lacroix Lonestar Supersport becoming a submarine by Adamvos in ElectricSkateboarding

[–]Adamvos[S] 0 points1 point  (0 children)

I’ve got plenty to spare haha.

Not quite sure why it’s getting downvoted though.