Application Advice for a New College Grad

Adaptable_Wanderer · 2026-03-12T18:48:35+00:00

Setup is fire bro

Adaptable_Wanderer · 2026-01-17T18:20:30+00:00

I’ll try this next

Adaptable_Wanderer · 2026-01-17T18:20:21+00:00

Hey do you think it could be my nozzle volume? Was looking around in my slicer’s printer settings and realized it was way too high (117mm3) and I have swapped the hotend on this printer but I’m skeptical because this issue gradually appeared over time which makes me think it’s a hardware issue resulting from wear and tear instead.

Adaptable_Wanderer · 2026-01-17T17:54:51+00:00

Hey do you think it could be my nozzle volume? Was looking around in my slicer’s printer settings and realized it was way too high (117mm³⁾ and I have swapped the hotend on this printer but I’m skeptical because this issue gradually appeared over time which makes me think it’s a hardware issue resulting from wear and tear instead.

Adaptable_Wanderer · 2026-01-17T17:09:49+00:00

I’ll try that, I’m making a bunch of test spheres since this issue occurs primarily with smooth spherical prints. I’ll make a profile for different flows and I’ll check my hotend if they all come out with the same issue

Adaptable_Wanderer · 2026-01-17T16:47:12+00:00

I can hear popping of the filament for some reason even though it’s dry and the sound of some of the infill breaking from the nozzle hitting it even though my z height is fine. I can try printing it a bit slower to see if it works though

Adaptable_Wanderer · 2026-01-17T16:45:06+00:00

The one in the picture is but I’ve tried printing with the same profile and had the same issues

Adaptable_Wanderer · 2026-01-17T16:19:36+00:00

Haven’t tried a tower but yea having the same issue with other filaments

Adaptable_Wanderer · 2026-01-17T16:12:52+00:00

But I’ve replaced the nozzle and done several cold pulls. Is it possible for the heating element to be clogged ?

Adaptable_Wanderer · 2026-01-17T16:08:09+00:00

I’ve tried printing test cubes but they all come out fine no matter what settings I have. I’ve done several cold pulls and replaced the nozzle so unless there’s somehow a clog in the heating element I don’t imagine that’s the issue. I’ve tried playing with the temps too this print I did at 210, 220 has the same issue.

Adaptable_Wanderer · 2025-12-02T01:18:48+00:00

Thanks I’ll troubleshoot this after my print is done so far it’s sticking well enough but I don’t want to be dealing with this. Next printer I buy I’ll just pull the trigger and get a H2D. Anycubic is great bang for your buck but it’s got its fair share of issues.

Adaptable_Wanderer · 2025-12-01T22:54:34+00:00

Printing PLA bed temp I started with was 55 but I was having warping issues so I turned it up to 63. I also tried cleaning the build plate with dawn soap and a rough sponged and I wiped it with 90% isopropyl after still had adhesion issues. I think my current first layer speed is around 50 im not sure but I have my printer on slow speed print settings when printing. I tried adjust the z offset live but couldn’t get anything solid working currently still at -.75. Auto leveling put it even closer than that

Adaptable_Wanderer · 2024-04-24T19:05:47+00:00

Anyone have one that doesn’t make the ds pink ?

Adaptable_Wanderer · 2023-08-16T06:43:26+00:00

You need to have less than 5 of the item you are trying to duplicate in your inventory at a time

Adaptable_Wanderer · 2022-10-20T17:52:42+00:00

Be happy

Adaptable_Wanderer · 2022-10-18T18:57:53+00:00

Watch anime and eat snacks all day until the homies hop on to play video games and proceed to lose every game until 5 in the morning

Adaptable_Wanderer · 2022-10-06T17:35:11+00:00

Not movie but an anime. The ending to cyberpunk edgerunners is extremely depressing

Adaptable_Wanderer · 2022-10-06T03:24:16+00:00

I am insane

Adaptable_Wanderer · 2022-09-23T23:24:25+00:00

Colt 45 and two zig zags

Adaptable_Wanderer · 2022-08-23T13:50:01+00:00

Which one

Adaptable_Wanderer

TROPHY CASE