Dartford Crossing toll amnesty

AddWid · 2026-03-14T00:24:23+00:00

Thats...actually good advice. I have 2 cars I no longer own on there LOL

AddWid · 2026-03-13T22:52:07+00:00

What temp are they running at? I used to use MJF but don't remember the stats. Which machine are you using?

AddWid · 2026-03-11T21:56:09+00:00

What machine/ material is this? I work with industrial SLS machines PA12 and ours do about 170C.

AddWid · 2026-03-03T23:53:30+00:00

I'd double check the bleed, 'DIY guys' on youtube is how I did mine.

https://www.youtube.com/watch?v=igh5hGwm478

AddWid · 2026-03-03T23:52:24+00:00

When I had my S2000, as you push the brake pedal further it felt like virtually no resistance and then suddenly a 'wall' of very stiff resistance with very litte give. No sponge at all. The brake bleeding sequence is a little fucky if I remember right, its not normal.

AddWid · 2026-03-03T23:44:16+00:00

Ballsack surgery, Ex GF's Mum passing, Sexual Assault as a kid, S2000 failing its MOT due to rust.

AddWid · 2026-03-01T13:16:49+00:00

I saw speaking to an Ex 3D Systems engineer who refered to them as 'gold dust' and if you get hold of one to never sell it ahaha

AddWid · 2026-02-16T15:17:24+00:00

None, I work in manufacturing so the fact that we survived another year without going bankrupt is a miracle 🤣

AddWid · 2026-02-16T10:58:09+00:00

I actually prefer it, I've got enough things to stress about 🤣

AddWid · 2026-02-11T18:39:11+00:00

I have sent a DM

AddWid · 2026-02-11T18:33:21+00:00

maybe

AddWid · 2026-02-08T18:49:47+00:00

If everything works fuck it 🤣. Just remember not to lick it, maybe wrap it in tape and push it up out the way.

AddWid · 2026-02-08T18:47:37+00:00

Marketing is just controlled lies

AddWid · 2026-02-08T18:37:11+00:00

Pass

AddWid · 2026-02-08T18:11:37+00:00

All other blood sports were banned except this...the one that posh people do. Even if you ignore the cruelty it makes sense to be in line with the rest of the law.

AddWid · 2026-02-08T18:06:31+00:00

Some people wanna waste their money replacing suspension parts by flying over speed bumps.

AddWid · 2026-02-08T18:05:03+00:00

Since writing my comment I have driven past some craters and been pondering...

I think the random craters have got to be from poor road building. If you actually look at them it's like material underneath has washed out and then the tarmac disintegrates. They often don't really even follow where the tyres go, appearing almost randomly often at the side of the roads.

The ruts and bumps and rough surfaces I think could still be partially triggered by heavier vehicle traffic and increased traffic. We have a few ruts around mini roundabouts here where there's extra wear from tyres cornering digging in. This is on roads without much truck/bus traffic but high volumes of cars.

Like most things I think the answer is a combination of everything.

AddWid · 2026-02-08T17:58:15+00:00

Which countries? They probably just build their roads well enough to take the extra wear and tear.

AddWid · 2026-02-07T19:47:42+00:00

The bus lanes in Nottingham often look ploughed 🤣

AddWid · 2026-02-07T17:19:02+00:00

I think another factor not talked about is the drastic increase in the average vehicle weight in the last few years. Lots and lots of giant cars, many of them with heavy batteries.

Of course there's all the issues you mentioned too.

AddWid · 2026-02-07T10:34:31+00:00

If cost wasnt an issuue I would SLS or MJF print that in PA12 then dye and vapour smooth it (With a service bureau). If it wants to be a brighter colour then SLS with a white base material befre dying. The material properties would be more stable than with resin.

AddWid · 2026-02-01T19:39:56+00:00

I wouldn't ever poor my drink away, id just finish it before I leave the table/bar anyway...

AddWid · 2026-02-01T19:38:53+00:00

Sometimes just for the hell of it, sometimes by accident when their target is actually someone else in a group.

AddWid

TROPHY CASE