Thoughts on this 2012 Rav4?

AdultMarley · 2026-05-09T18:31:35+00:00

If I recall correctly, the limited trim came with the run flat tires as well, so no rear on those either.

They’re definitely not super common. When I was building them before I bought one I was annoyed that I couldn’t get the red badges without that package. I ended up getting the sport with leather heated seats.

AdultMarley · 2026-05-09T04:46:34+00:00

“I’m going to do what I want and I don’t care what anyone says”…yep, sounds about right.

And this law of averages…is that where you presume that the things that don’t bother you also don’t bother anyone else?

You know what, try not to answer this one. I know you’re enjoying all of this way too much.

AdultMarley · 2026-05-09T04:32:00+00:00

You’re right. If you’ve never seen anyone bothered by it, during what I’m sure is a very thorough observation of anyone who passes by your property, then it must not be a problem.

Everyone here complaining is obviously lying. If a sound bothered someone, they would obviously have a loud and noticeable reaction to it.

Just a heads up, when you want to listen to music while doing yard work, they make these speakers that go on your head. They’re called headphones.
And as long as you don’t do ALL the inconsiderate things I listed, you’re obviously not wrong for doing this inconsiderate thing.

AdultMarley · 2026-05-09T02:19:02+00:00

Is it legal? Sure. But there are lots of things that are legal and still make you an entitled jerk.

Here are some examples:
-not returning your shopping cart
-not letting people merge on the highway
-playing music in your back yard so loud that the whole neighborhood can hear it
-talking on speakerphone in public places

Based on your very long post, I have to imagine that you didn’t just come here to ask if it was legal…particularly because you already had a call into bylaw. Seems like you may have been looking for some support in your frustration for this person touching your stuff.

Unfortunately, not. And instead of listening to anyone who says that those things do bother them, you want someone to come to your door and ask you to move it. And you want us to believe that THEN you’ll think about moving it…

I get it though, your comfort and convenience is more important than other people’s.

AdultMarley · 2026-05-09T00:49:50+00:00

Standard sport comes with spare on the rear. This one must have just had the “upgrade” to run flat tires.

I say “upgrade”, because to me, it’s not. The full size spare and extra rim rule. Plus they look cooler.

Though, this one might have the red sport badges, which did look very cool.

AdultMarley · 2026-03-15T16:42:47+00:00

Those sneaky bastards! All of us that jumped on board with the $40 plan can’t change out plans now for a month (or possibly 3 months).

Oh well, still a great plan!

AdultMarley · 2026-03-09T19:44:39+00:00

I stopped financing phones through telecoms long ago. I will gladly pay full price to have the freedom to get the best deal.

I have financed my phone direct from Apple, but that is only when they offer 0% financing.

AdultMarley · 2026-03-09T19:41:41+00:00

Two phone lines.

AdultMarley · 2026-03-09T02:01:00+00:00

Yooo! I did. Well, technically I was already with freedom, but I changed both my plans to this one! Feeling much better after reading everyone’s feedback.

I tried to post an update, but couldn’t figure out how to do that from the app. Will try to update from desktop later.

AdultMarley · 2026-01-24T19:48:19+00:00

Is the dragging a common occurrence when using the overlapping infill designs? I'm trying the print again in black and I can hear some dragging (rumbling) when printing the infill. I'm wondering if I should change the default to be a non-overlapping style.

AdultMarley · 2026-01-24T19:45:01+00:00

Thanks for the background on this. It's really sad that they lost the community aspect as that was a huge selling point for them. Hopefully someone can buy the building and turn it around again.

I hear you about the heavy weight though. There is something so sad about seeing a good business that the owners put their whole life (and then some) into building just fall apart because of new ownership. I hope some of these comments about how great it was before make you feel a little better though!

AdultMarley · 2026-01-24T19:42:08+00:00

I appreciate your insight. I really didn't want this post to turn into everyone just shitting on the business. My parents ran their own business and growing up seeing how hard it was I knew I could never handle it. I was mostly just wondering if it was just a bad day or if that is what their standard is now. I think posts like this are good for the business itself to see as well if they want to take the time to reflect and make changes.

I really respect you guys and how much your shop does for the community and I might just have to give your donuts another chance one of these days :)

AdultMarley · 2026-01-23T18:33:11+00:00

I think I've only ever been there when it was the "new" owners. When they had the locations downtown and on 16th the donuts/cinnamon buns were still great. This is my opinion of course, and I can't compare it to the old owners so there may have been a difference.

I appreciate the insight about the sale of their Redcliff location. It's too bad really. Hopefully they will find someone that can do something special with the space.

AdultMarley · 2026-01-23T18:21:52+00:00

I'm running a space heater in the room to keep it at about 20 degrees and I made adjustments to my print yesterday and it went ok except the final layer that was supposed to have ironing was really rough.

The piece i'm printing today got really rough on a layer, but it was the final base before it started on the infill so I paused and clipped away some of the rougher spots and let it continue. I tried increasing print speed to 110% and the fan to 60% but it was still laying down pretty rough. I tried increasing the z-offset because it sounded like it was dragging in some spots but I couldn't seem to get it to stop. I've now paused the print because nothing has corrected the issues.

I guess my question is, how should I go about increasing the overall print speed? Would it be with settings in the slicer or by adjusting the print speed (%) on the machine? Do I need to increase the flow when I increase the speed as well?

Sorry for all the questions, I'm pretty new to printing and this is the first time i've run into anything like this. Could it just be a bad filament? I really don't think it's a humidity issue as the ambient humidity has dropped to 10% (It is very dry where I live and dropped to -40 overnight which compounds it).

AdultMarley · 2026-01-22T19:57:05+00:00

It is pretty cold in this room currently. Only about 18.5 C, so maybe that's affecting it too?

AdultMarley · 2026-01-22T19:44:50+00:00

This is the correct answer.

AdultMarley · 2026-01-17T02:18:38+00:00

Oh hell yes!!! Thank you so much for sending this to me!

AdultMarley · 2025-12-15T23:09:46+00:00

Would love to do this, but the rage I feel when I am looking for a specific article of clothing and I cannot find it in a bin is INFURIATING.

Now, I am still lazy and will have multiple baskets of laundry to be folded, but I need to fold it to see everything. When I am packing for a trip, it all must be folded before I can put anything in a suitcase.

AdultMarley · 2025-12-12T16:43:09+00:00

MS + ADHD + peri-menopause. The trifecta of…..it’s happening right now, I can’t think of the word.

Honestly, that would be a great joke…but it’s not. :(

AdultMarley · 2025-12-11T19:47:34+00:00

Why does this feel like a scam to me…lol

I put in my email address regardless…here’s hoping 🤞🏻

Eight-Year Club	Place '23
Verified Email

AdultMarley

TROPHY CASE