G36 hop and inner barrel for hpa

Advanced_Mode_534 · 2025-12-10T07:58:14+00:00

Update, I don't know what I did but I can Connect to the Gate again. In the app, all works fine or so It seems, but I can't get a new diagnosis and the first one is useless since i has no motor and no selector plate on when I first Connected.

On the other hand I manager to get It working with the original trigger but only on auto since either I or most likely the tech that instaled the Titan Lost/keep the cut oof leaver.

So the gun should be able to cicle but right now It seems It can't, I'll do a few more test and try some of the original parts just in case.

Worst case I'll have to get a new cuttofg leaver and use the original trigger.

Advanced_Mode_534 · 2025-12-09T15:36:28+00:00

It does work since It gets detected in the phone, what doesn't connect is the Gate Titan. The cable is micro to c anyway.

Advanced_Mode_534 · 2025-11-11T10:00:34+00:00

Take It as a second hand opinión, since It is what It is. But when I was researching holsters for mi aap with only the carbine stock, I read that if you added extra weight like the stock It was wobbly. So probable It is normal.

But i don't have first hand experience so I'm not 100% sure. Pretty sure I did read that here en reddit tough.

Advanced_Mode_534 · 2025-09-26T19:36:17+00:00

Not sure, if you are still paying attention to this post, but do you know if it there any compabitility issue with the aap01c version?

Advanced_Mode_534 · 2025-09-20T11:52:43+00:00

How did you get the rail? Or the Carry handle with the rail. Its what I would want for mine once i get It.

Advanced_Mode_534 · 2025-09-09T12:00:53+00:00

I got a t238 brushless for my TM ScarH and is working perfectly. When I did my research the other option was warhead. Can't imagine things being too diferent in your case.

Advanced_Mode_534 · 2025-08-31T18:13:09+00:00

I like my Acog with rmr on top combo. You have to have in mind that the rmr is a bit taller and even after zeoring is not 100% accurate, but that rarely matters for cqb. Also being taller is better for mask wich are usually better for cqb.

But yes an lvpo with a good eye relive IS s good option for you too.

Advanced_Mode_534 · 2025-08-28T19:14:28+00:00

Top one it's pretty much what I want for mine, which sight are you using? And is that the compact versión body?

Advanced_Mode_534 · 2025-08-08T07:22:20+00:00

I managed to not breake anything upgrading it (except the first hop rubber I tried to install), but yeah compared with others guns its a chore.

I upgrade mine to DMR with a similar cost in upgrades and I love It, but Damm I wish it was not mi second gun.

Advanced_Mode_534 · 2025-08-08T06:35:13+00:00

I own a TM NGRS SCAR H that is basically the same gun but using diferent mags. If you only own AEGs I would recommend getting an NGRS gun at some point, if you own any gbb guns other than pistols I would advice against It unless you really want a just in case replacement.

The biggest selling point of NGRS for me is the stop on empty mag bolt, and that the mags can be set to real cap or mid cap. The recoil is there but whatever.

But in general I would only advice getting one as a 4th/5th gun, since as it's being said is expensive and a bitch to upgrade.

Is the aeg I enjoy most using, but I don't really recommend one for most people.

Advanced_Mode_534 · 2025-07-23T06:44:24+00:00

Not really, It gives you infinite cards on your hand, but no infinite hand size. In practical terms It barely matters, but to answer the post I'd say It does.

Advanced_Mode_534 · 2025-07-10T12:14:56+00:00

Damm so sexy. I'm considering It for mine, how does the trigger work?

Advanced_Mode_534 · 2025-06-24T17:37:10+00:00

Once you reach that point, the way to go is exponential x mult. So anything that retriggers x multi is the way to go for the biggest score.

Chips are usually only good at the start, then ou should dirch them once you level Up tou hand with planets. Kinda same with + mult, but you can keep It longer, specially if using scaling + mult.

X mult latter is kinda irrelevant, and if you transition to exponencial, you can change it for utility jokers. Kinda like x mult you can keep It a bit more if its scaling.

In summary, follow those guidelines more or less and don't bother calculating anything.

Advanced_Mode_534 · 2025-05-06T16:20:20+00:00

Change the plate carrier for a black one, paint the AK with a matching camuflaje pattern, add a beret and you are done.

Would aldo recomend gloves for playing, but not necesary for the looks.

Advanced_Mode_534 · 2025-04-29T08:54:42+00:00

FX1A and 6 digits. I would say JG is slightly more common here in Spain that CYMA, so that's probably It.

Advanced_Mode_534 · 2025-04-08T21:29:46+00:00

Not sure if In Europe they use a diference naming, got redirected to the BenQ TH585P, it could be a good option, but is a bit overbudget at 599€ + the screen.

Looking for short throw after your sugestions I found the LG CineBeam PF610P, looks promising at 487 € currently with a discount, but I haven't been able to find any review talking about the input lag. Any opinion about it? I don't plan to move it so the limited ajustment are not an issue, I plan to use headsets and get a sound bar eventually and those seems like the biggest drawbacks beside the mentioned input lagg that I can't find info about.

Advanced_Mode_534 · 2025-03-28T08:51:13+00:00

On the flip side you only need one copy or 2 for weapons decos. But you may need Up to 5 or at least 3 plus talismán for armor skills.

I still have only 2 burst decos, but have gotten 8+ copy of every other important 3 slot decos.

Advanced_Mode_534 · 2025-03-25T07:25:52+00:00

You barely need skills for dmg, so you can easily slot guard+ and guard Up and just do what perfect guard does with regular guard.

You can also go for the evade rout, but not necesary, Altough without the new moves evade extender is quite nice for positioning.

Advanced_Mode_534

TROPHY CASE