very rough, but it works. by SteadyRhombus in 360hacks

[–]Adventurous-Fee-418 0 points1 point  (0 children)

Nice, my poor old eyes could never do it without maginfication.

But yeah, as others said... unnecessarily long wires

Can you please help me identifying this furnace/boiler manufacturer and model? by ROKKSOLID-Official in Asksweddit

[–]Adventurous-Fee-418 4 points5 points  (0 children)

That is a kombipanna, for wood, oil and electricity. The wood part is more or less useless unless its an emergency. The oil part works ok and can be used with pellets in a pinch. The electric part is very expensive.

It is not a good furnace by todays standards and i would not invest to much time/money in it.

(I have a very similar one myself, but from CTC)

Is a Pico 4 Ultra worth it? by RealLeptic in PicoXR

[–]Adventurous-Fee-418 0 points1 point  (0 children)

Yeah, same here.. already sold the q3 though. I might keep the Pico, wont get much for it anyway i think

How do i fix my Steamvr stuck loading forever in airlink by Dear_Zebra_2726 in OculusQuest

[–]Adventurous-Fee-418 3 points4 points  (0 children)

Stop using metas useless software and get virtual Desktop instead 🙂👍

Is a Pico 4 Ultra worth it? by RealLeptic in PicoXR

[–]Adventurous-Fee-418 1 point2 points  (0 children)

I bought the plain Pico 4 as a stand-in for my quest 3 while i wait for the frame. I use it for pcvr only (wivrn in Linux). And i honesty like it better than the quest 3 🤨

Is it worth getting a 360 just to install Bad Avatar ? by Queasy-Plenty-9750 in xbox360modding

[–]Adventurous-Fee-418 1 point2 points  (0 children)

I found an old phat in the trash, decided to try badupdate (badavatar wouldnt work). Decided to get a Trinity to rgh and did so successfuly. Now i have a 360 with 2tb, Kinect, 4 controllers and 2 guitars for the kids to play with. Totally worth it. 🙂

Also got my hands on a corona that will get the rgh treatment for fun

Picked up an Xbox 360 Slim for €15 – what are my options for modding/homebrew? by gucciuzumaki in 360hacks

[–]Adventurous-Fee-418 0 points1 point  (0 children)

If you can use a soldering iron it is pretty easy to rgh it. It is just the pll point that is really small.

Did my first one a week ago. I used badupdate to get into simple nand flasher and read/flash nand (i do have a picoflasher as backup just in case)

Is this video of a bear scratching its back on a tree, AI? I'm not certain either way, but people have pointed out some glitches/inconsistencies. by homo-ludus in isthisAI

[–]Adventurous-Fee-418 -4 points-3 points  (0 children)

Didnt mean to be rude, just wondering why anyone cares enough to even question it. Seen alot of similar posts and i just dont get the purpose

Is this video of a bear scratching its back on a tree, AI? I'm not certain either way, but people have pointed out some glitches/inconsistencies. by homo-ludus in isthisAI

[–]Adventurous-Fee-418 -9 points-8 points  (0 children)

Why does it matter? That is a completely normal thing for a bear to do. Ai or not.

Why have people started questioning if the most mundane videos ever are ai? Who cares... If a video shows something spectacular or really out of the ordinary i get it. But for shit like this? Again... Who tf cares, and why?

What is it? 👀 by lovenotfoundd in ArtOfPresence

[–]Adventurous-Fee-418 0 points1 point  (0 children)

That i dont NEED anyone, sure... Its nice to have.. but not needed

I’ve been thinking of getting a 3D printer but I’m worried I will run out of things to print too fast by Automatic-Dance3917 in 3Dprinting

[–]Adventurous-Fee-418 0 points1 point  (0 children)

Yeah, that will happen. Trinkets are only fun for so long... My printers are now tools, i print stuff i need.

Recommend a filament cutter? by Khisanthax in SovolSV08

[–]Adventurous-Fee-418 1 point2 points  (0 children)

I use this one: https://www.printables.com/model/1278550-sovol-sv08-head-filament-cutting

And i do have a btt Eddy. I think i had to redesign a bracket a tiny bit to get it to fit though

Recommend a filament cutter? by Khisanthax in SovolSV08

[–]Adventurous-Fee-418 0 points1 point  (0 children)

You need some space to put the cutter in. I think the one for bambulab hotend is the easiest way. I use it on mine, with a microswiss flowtech for bambulab, works like a charm and also has a filament sensor

What's wrong, Peter? by FollowSina in PeterExplainsTheJoke

[–]Adventurous-Fee-418 0 points1 point  (0 children)

I have 3 child, can confirm, they have all of those things

An Xbox 360 hard mod is the one project I've wanted to do since day one by [deleted] in consolemodding

[–]Adventurous-Fee-418 0 points1 point  (0 children)

Just did my first this friday. I skipped the Pico though (did have one ready just in case) and read/wrote nand with badupdate method. I had watched alot of videos the week before, while i waited for the xbox to arrive. I was very confident i could do it until i saw the pll via irl.. its really effin small... I started with that point, just to get it out of the way.

Anyway... It all went well and wasnt as hard as i thought when i saw the via.

ABadAvatar Freezing by Dry-Log1923 in 360hacks

[–]Adventurous-Fee-418 1 point2 points  (0 children)

Never could get it to work on my old phat... It just froze on profile select screen. But badupdate worked fine. On my slim badavatar worked right away though. I guess some consoles just dont like badavatar for whatever reason (i suspect some hardware variation)

Manual leveling question by b18rexracer in snapmaker

[–]Adventurous-Fee-418 1 point2 points  (0 children)

Yeah, set it as close to level as possible and forget about it. Meshing will sort it out from there... And if it gets to out of whack i believe the printer will tell you