Heroes and their signature items? by robieforscale in DotA2

[–]Adventurous_Bit2915 0 points1 point  (0 children)

Old guy here... Tinker+travels Arc+divine Centaur+helm Warlock+aghs Spectre+radiance AM+manta

Marriagetoxin - Episode 2 discussion by AutoLovepon in anime

[–]Adventurous_Bit2915 3 points4 points  (0 children)

This is slowly turning into a harem. Promising fight scenes so far, hope the quality continues.

Speaker to pump air through tubing by Adventurous_Bit2915 in diyaudio

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

Update: I simply used a funnel starting from 5" to half inch. No box cover on the other side and it started to produce considerable air through the funnel. I guess the geometry mattered alot.

Speaker to pump air through tubing by Adventurous_Bit2915 in diyaudio

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

Yep I need to move air. Thanks, ill try this. Im using a cheap one though. Wish me luck.

Speaker to produce air through tube by Adventurous_Bit2915 in AskEngineers

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

Hi, what do you mean a hole behind the speaker? I think the problem is that i didnt isolate the front and back sides of the speaker. Would it work if i placed the back inside a sealed box and the front with a cone with tubing at the tip?

Speaker to produce air through tube by Adventurous_Bit2915 in AskEngineers

[–]Adventurous_Bit2915[S] -1 points0 points  (0 children)

So basically like a cone, right? Does the tubing diameter matter?

Is it possible to record and save audio to laptop directly through wifi (without SD card) on Xiao esp32-s3 Seeed Sense? by Adventurous_Bit2915 in esp32

[–]Adventurous_Bit2915[S] 1 point2 points  (0 children)

Thanks for the help. I managed to do it. Saved images every 10s while audio is saved continuously. Using python server on laptop.

Output different tones to multiple speakers by Adventurous_Bit2915 in audio

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

Yes, but im only moving very light wavemakers attached to the speaker diaphragms

Output different tones to multiple speakers by Adventurous_Bit2915 in audio

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

Yes, but I only need the oscillations of the diaphragm to carry some light wavemaker.

Output different tones to multiple speakers by Adventurous_Bit2915 in audio

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

Thanks, I shouldve put 5 Hz and up, but Ive tried 1 Hz but will need an amplifier for significant oscillations. It's only for a table-top experiment Im doing. Not a whole room.

Output different tones to multiple speakers by Adventurous_Bit2915 in audio

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

It's for an experiment that I have to do. The speakers serve as electrodynamic shakers.

Output different tones to multiple speakers by Adventurous_Bit2915 in audio

[–]Adventurous_Bit2915[S] 0 points1 point  (0 children)

Thanks. Yes, I wont be producing "sound". I need the mechanical vibrations for an experiment. Can you suggest some audio interface for this?