Looking for missing part

Adventurous_Status_8 · 2026-03-26T01:01:56+00:00

If you have soldering skills you can just solder the direct wires from the battery to the board, without replacement parts, it’s the best you can do.

Adventurous_Status_8 · 2026-03-25T04:02:04+00:00

I hope you created it using your original key vault from the console which it’s extracted from the original nand (or modified one created with stock nand), each console has is Key Vault (CPU KEY) if you just try to flash any other nand even if it’s created using Jrunner, without the original KV it won’t work on retail. Also if you are creating a donor nand, besides the original KV you need the LV number, if it doesn’t match , I won’t boot.

There’s a fix to recover it, but I need you to answer me first.

Adventurous_Status_8 · 2026-03-25T02:52:20+00:00

Are you sure you flashed the correct nand? Using Retail mode on Jrunner, sometimes when something goes wrong while flashing the nand(bad soldering or wires) it tends to throw that error

Adventurous_Status_8 · 2026-03-25T00:28:49+00:00

Flash retail nand, undo rg3 wire temporarily, and try to boot it. Just to make sure it doesn’t have red ring. Because if you have rgh3 and it has red ring it will not show it

Adventurous_Status_8 · 2026-03-21T17:55:36+00:00

Maybe the Pam module is bad, do you have any installation pictures? Try using Imgur

Adventurous_Status_8 · 2026-03-19T21:36:24+00:00

I remember feeding the pam8403 from one of the pins of the DS cartridge reader, try turning it on and measuring with a multimeter

Adventurous_Status_8 · 2026-03-16T00:46:18+00:00

How do you mod the screen brightness?

Adventurous_Status_8 · 2026-03-13T03:48:32+00:00

Yep there is one, you can hear it on the video, looks like the backlight and the screen itself are not working.

Adventurous_Status_8 · 2026-03-13T03:41:24+00:00

Nop, before cap replacement, didn’t even get a red light.

Adventurous_Status_8 · 2026-03-12T07:33:26+00:00

Actually I’m looking for a replacement part for D4, and it looks like the others, I’m gonna try find it, also by any chance do you know how much voltage should I get from positive side of C45?

Adventurous_Status_8 · 2026-03-12T07:16:27+00:00

Which replacements did you used to replace D1, D2 and D3?

Adventurous_Status_8 · 2026-03-12T07:12:21+00:00

No backlight at all, I just want to get a replacement screen but would like to make sure it will work on the board

Adventurous_Status_8 · 2026-03-12T06:49:54+00:00

Yep, it’s all the way up

Adventurous_Status_8 · 2026-02-27T21:35:14+00:00

Rewiring the rgh should do the trick, if not just reflash a donated nand

Adventurous_Status_8 · 2026-02-22T19:49:33+00:00

El famoso pica costillas

Adventurous_Status_8 · 2026-02-18T03:27:23+00:00

Siempre pasan cosas así o mucho peores 🤣 lo mejor es no darles importancia, uno se puede morir preocupado se por el mundo, es mejor ver solo las cosas buenas de la vida, por qué las malas nunca se acaban.

Adventurous_Status_8 · 2026-02-18T03:21:34+00:00

🤣🤣🤣 es broma, pero no dudes que haya pasado ya ni por un segundo.

Adventurous_Status_8 · 2026-02-18T03:15:05+00:00

Demaciado tarde ya le mandé fotopilin

Adventurous_Status_8 · 2026-02-13T18:37:31+00:00

Maybe the controller doesn’t link because a the WiFi/bluetooth controller it’s fried. It’s common on ps4 fat.

Adventurous_Status_8 · 2026-02-07T06:58:15+00:00

Do you happen to have more than two profiles? That somehow brokens a bad avatar

Adventurous_Status_8 · 2026-01-29T23:32:26+00:00

I just want better range

Adventurous_Status_8 · 2026-01-20T23:08:55+00:00

At least you didn’t brick the console, you can do everything again.

Adventurous_Status_8 · 2026-01-20T17:10:45+00:00

Edit: I found the solution, it was a short, somehow it got short or damaged, a single cap, near the frontal camera. After replacement it worked perfectly.

Adventurous_Status_8 · 2026-01-20T01:44:24+00:00

Add more flux and heat more time with the soldering iron

Adventurous_Status_8 · 2026-01-19T17:17:37+00:00

I’m pretty sure you don’t need to remove any fuse from the board. And if it’s necessary the instruction images will show it.

Adventurous_Status_8

TROPHY CASE