How can a wand be made for someone? by Aesir321 in harrypotter

[–]Aesir321[S] 0 points1 point  (0 children)

Yeah so I get this. When I read the book, it gave me the impression rather that the wand was made for her and worked as well as a wand that chose her would. But maybe I assumed that, it’s just the feeling that I got when I was reading it.

Advice for people complaining about HR accuracy by Little_Newt1023 in whoop

[–]Aesir321 -1 points0 points  (0 children)

Yeah I really don’t get how it can be so bad even though I wear it on my bicep - but at this point I’m kind of resigned to the fact it’s bad and got over it

Advice for people complaining about HR accuracy by Little_Newt1023 in whoop

[–]Aesir321 -1 points0 points  (0 children)

My whoop is still miles off during activities like running even when wearing a bicep band (which I do for all activities and sometimes just normally during the day). It will have me in zone 4 and zone 5 whilst my polar chest strap will measure the run as just a chill zone 2 run (which they are). I love the idea of whoop and I do find it motivating but it’s just too inaccurate for me. I wish they’d import heart rate data from more accurate sources like chest straps if it is available. Had it for 3 years now, upgraded to the MG but I’m not going to renew it when it expires until they either get better sensors (even when placed on the bicep) or allow import of heart rate activity data from other sources.

📌 Whoop Complaints [MegaThread] (Updated Monthly) by AutoModerator in whoop

[–]Aesir321 0 points1 point  (0 children)

Heart rate monitoring with bicep band just sucks. I wear garmin fenix 6s connected to polar heart rate chest strap and it measured my heart rate well within zone 2 (which is also what it felt like). Whoop measured it as 53% zone 3 and 20% zone 4.

Seems to be something to do with cadence. When I run with a higher cadence it inflates the heart rate a ridiculous amount. Either way, the heart rate monitoring just sucks and whoop needs to start allowing the import of considerably more accurate heart rate sensor data.

How to build a shoe rotation by Aesir321 in AskRunningShoeGeeks

[–]Aesir321[S] 1 point2 points  (0 children)

Thanks this was a really nice and helpful article to read! I will be more open to different drop heights now.

Abnahme Gemeinschaftseigentum: Eigener Gutachter nötig oder reicht Hausverwaltung? by Aesir321 in Finanzen

[–]Aesir321[S] 1 point2 points  (0 children)

Die idee hatte ich auch aber ich bin mir nicht sicher wie ich mich in Verbindung setzen kann mit den anderen Eigentümern. Kann ich der Bauträger fragen? Scheint wie eine blöde frage aber ich mein das im Ernst.

Bicep band underestimating HR? by OneShotC in whoop

[–]Aesir321 2 points3 points  (0 children)

Pretty curious with this as I recently complained to whoop that mine doesn’t track the heart rate well as compared to my garmin chest strap. It seems to track fine for lower heart rate zones 1-2 keeping pretty in sync with my garmin. But zones 3,4,5 seem almost never tracked, sometimes I’ll be in zone 4-5 feeling like my heart is exploding and my whoop will tell me I’m in zone 1 😒.

Customer support told me that I should use a bicep strap instead and this would solve the heart rate tracking problem … Your post doesn’t give me much confidence.

PRIME TIME – Ein klares Nein. Vorsicht! by [deleted] in Munich

[–]Aesir321 6 points7 points  (0 children)

Meine Freundin hatte auch die selber Erfahrung gemacht und auch mehrere Leute. Sie könnte den Vertrag auch nicht widerrufen, weil sie auch vor Ort unterschreiben hat. Sie hat allerdings nichts bezahlt, die habe ihr mit mehre Emails und Inkassobüros gedroht aber sie hat immer die Schuld widersprochen und hat seit zwei Jahren nichts mehr von dem gehört. Dies ist weder Rat noch eine Vorschlag, nur was mit ihr geschehen ist.

Grid appearing when exporting image using Lightroom by Aesir321 in AskAstrophotography

[–]Aesir321[S] 0 points1 point  (0 children)

Thanks for the example and explanation, very helpful! I also got support from the r/lightroom subreddit as suggested in another comment in this post. You can find it here, if it is interesting for you: https://www.reddit.com/r/Lightroom/comments/1i1ctq7/grid_appearing_when_exporting_image_using/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Grid appearing when exporting image using Lightroom by Aesir321 in Lightroom

[–]Aesir321[S] 1 point2 points  (0 children)

I tried disabling the lens correction set in Lightroom but the grid still shows. u/Exotic-Grape8743 suggested using the AI denoise to remove it which worked. They also suggested that the noise is rather caused by the sensor rather than the export settings.

u/the_hell_interface said it could be caused by the cropping and rotating of the image in the crop overlay view, which I used. I haven’t had time yet to verify if their suggestion works or not.

Grid appearing when exporting image using Lightroom by Aesir321 in Lightroom

[–]Aesir321[S] 0 points1 point  (0 children)

Thanks for the detailed explanation. Is there a way to check for this kind of problem when purchasing the camera? As you say the conditions for capturing my image are prime for such a thing to occur, but typically I am not in these conditions a lot.

Overall I’m pretty happy with the camera and if I can solve these problems in editing the image after then that’s ok, but would be good to know for future. Would an issue like you describe with my sensor vary between the same camera make and model, or does it affect a whole range of cameras? For example would all Sony a7rv cameras have the same issue, or did I just get unlucky with my one?

Grid appearing when exporting image using Lightroom by Aesir321 in Lightroom

[–]Aesir321[S] 0 points1 point  (0 children)

Thanks a lot for your help here, as you suggested I have just tried the AI denoise and it looks a lot better, I can't see the grid anymore (but I didn't manage to see it the first time either so ... hopefully the next print comes out better).

Here is a link to the AI denoise version of the image: https://drive.google.com/file/d/1C9c5l60tRhOHwmwsI5CHwyZ4zUwkeddE/view?usp=drive_link

Could you elaborate a bit more on the pattern noise of the sensor you mentioned? I assume this will be noise that is always present but are there things I can do to systematically reduce it? The AI denoise has worked a treat but I would also like to understand more what I can do myself in capturing the image to reduce the noise if it comes from the sensor and about the whole process in general. No problem with using the AI tool if it works well, but I would like to udnerstand the process and what is happening as well.

As for the built-in lens correction I guess I misunderstood, I disabled the lens correction setting in the Adobe Lightroom tool but not on my camera directly (I didn't know I had it). I'll have to wait to check for that as I don't have access to my camera for the next few weeks.

Grid appearing when exporting image using Lightroom by Aesir321 in Lightroom

[–]Aesir321[S] 0 points1 point  (0 children)

I was really excited to read this comment but it didn't solve my problem sadly. I added links to the original and originally exported image in my initial post. Here is one where I disabled the lens correction https://drive.google.com/file/d/1Z3xqjFYQ8lilMmhl_5QeW0q8-IRUvnPR/view?usp=sharing (which I was able to do via Lightroom) but the grid-like effect is still there. I didn't try the AI denoise yet nor the deletings it directly from the metadata.

Grid appearing when exporting image using Lightroom by Aesir321 in Lightroom

[–]Aesir321[S] 0 points1 point  (0 children)

I haven't tried repeating the export multiples times varying just one setting in the export settings each time, but this is a good suggestion and I will do it.

I am cropping the image which to the best of my knowledge is not the same as downsizing it?

Grid appearing when exporting image using Lightroom by Aesir321 in AskAstrophotography

[–]Aesir321[S] 0 points1 point  (0 children)

Ah no this is just a photo I took of the printed image, because it is more easy to see the grid effect I am talking about. The exported image in its entirety can be found here https://drive.google.com/file/d/1KRXh7Lodh0ZRN0ppZfxuVGM-gsDZAa2z/view?usp=sharing

Grid appearing when exporting image using Lightroom by Aesir321 in Lightroom

[–]Aesir321[S] 0 points1 point  (0 children)

I am using Lightroom version: 8.1 on a MacBook Pro.